getcertified4sure.com

how to use exchange 70-342




The fiercer competitiveness while in the Them business will make it tougher for some of our Them workers to seek out adequate jobs. Microsoft is often a weapon that could assure a reliable position. Microsoft Documentation 70-342 Assessment is definitely an crucial screening while in the 70-342 Hardcopy. Not until you commenced to prep for that Microsoft audit, performed youI understand this hard it really is. Today, the learning things for this checks are way too a lot of seem to decide. Itll cost you time and effort in picking the suitable things. Consequently, candidates received dropped in discovering a very good an individual. Seeing as there are a great number of Microsoft products currently, it will become harder and harder with regard to candidates to find the proper an individual.

2021 Sep dump 70-342:

Q81.  (Topic 6) 

You have an Exchange Server 2010 organization named adatum.com. 

All public folders are stored on a server named EX5. 

You deploy a new server named EX6. EX6 has Exchange Server 2013 installed. 

You move all mailboxes to EX6. 

You need to move the public folders to EX6. The solution must ensure that users can access the public folders after EX5 is decommissioned. 

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) 

A. On EX6, create a public folder mailbox. 

B. On EX6, run the New-PublicFolderMigrationRequest cmdlet. 

C. On EX5, modify the replication partners for all of the public folders. 

D. On EX6, run the New-SiteMailboxProvisioningPolicy cmdlet. 

E. On EX5, assign the FolderOwner permission to the Public Folder Management management role group for all of the public folders. 

F. On EX6, run the MoveAllReplicas.ps1 script. 

Answer: A,B 

Explanation: 

B: Use the New-PublicFolderMigrationRequest cmdlet to begin the process of migrating public folders from Microsoft Exchange Server 2007 or Exchange Server 2010 to Exchange Server 2013. 

Note: See step 4 and 5 below. 

Step 1: Download the migration scripts Step 2: Prepare for the migration Step 3: Generate the .csv files Step 4: Create the public folder mailboxes on the Exchange 2013 server Step 5: Start the migration request Example: New-PublicFolderMigrationRequest -SourceDatabase (Get-PublicFolderDatabase -Server <Source server name>) -CSVData (Get-Content <Folder to mailbox map path> -Encoding Byte) -BadItemLimit $BadItemLimitCount 

Step 6: Lock down the public folders on the legacy Exchange server for final migration 

(downtime required) 

Step 7: Finalize the public folder migration (downtime required) 

Step 8: Test and unlock the public folder migration 


Q82.  (Topic 6) 

You have an Exchange Server organization. The organization contains servers that have either Exchange Server 2010 or Exchange Server 2013 installed. 

You hire a new helpdesk technician named helpdesk1. Helpdesk1 is a member of the Recipient Management management role group. 

You discover that helpdesk1 created nine new mailbox-enabled users by using the New-Mailbox command. 

You need to identify which management role provides helpdesk1 with the permissions to create new mailbox-enabled users. 

Which cmdlets should you run? 

A. Get-ManagementRoleEntry and Get-ManagementRoleAssignment 

B. Get-RolegroupMember and Get-ManagementRoleAssignment 

C. Get-ManagementRoleEntry and Get-RoleGroup 

D. Get-Rolegroup and Get-RoleGroupMember 

Answer: A 

Explanation: 

* Use the Get-ManagementRoleEntry cmdlet to retrieve management role entries that have been configured on management roles. 

* Use the Get-ManagementRoleAssignment cmdlet to retrieve management role assignments. 


Q83.  (Topic 6) 

You are planning an Exchange Server 2013 Deployment. 

You plan to install exchange servers in two sites, SiteA and SiteB. You plan to add all exchange servers to a single database availability group (DAG) and have all of the databases replicated to all servers. 

You implement the load balancers as configured in the following table: 


You need to plan a solution that automatically allows all users to connect to their mailbox if all of the exchange servers in one site fail. 

What should you include in the plan? 

A. Create two host (A) records named mail.fabrikham.com that each point to one of the VIP’s. 

B. Change the DAG settings of AllowCrossSiteRPCAccess to $True. 

C. Create one host (A) record named site1.fabrikham.com that points to 192.168.1.10 and create one host (A) record named site2.fabrikham.com that points to 192.168.2.10. 

D. Change the DAG setting of DatabaseAvailabilityGroupConfiguration to $Null. 

Answer: A 


Q84.  (Topic 6) 

You have a server named Server1 that has Exchange Server 2013 installed. 

Users access their mailbox by using Microsoft Outlook 2010 and Outlook Web App. 

You need to identify when a mailbox is accessed by someone other than the owner of the mailbox. 

Which two actions should you perform? Each correct answer presents part of the solution. 

A. Review the security event log. 

B. Enable audit logging for all mailboxes. 

C. Export the administrator audit log. 

D. Run an administrator role group report. 

E. Run a non-owner mailbox access report. 

Answer: B,E 

Explanation: 

You have to enable mailbox audit logging for each mailbox that you want to run a non-owner mailbox access report. 

The Non-Owner Mailbox Access Report in the Exchange Administration Center (EAC) lists the mailboxes that have been accessed by someone other than the person who owns the mailbox. When a mailbox is accessed by a non-owner, Microsoft Exchange logs information about this action in a mailbox audit log that’s stored as an email message in a hidden folder in the mailbox being audited. Entries from this log are displayed as search results and include a list of mailboxes accessed by a non-owner, who accessed the mailbox and when, the actions performed by the non-owner, and whether the action was successful. 

Reference: Run a non-owner mailbox access report 

https://technet.microsoft.com/en-us/library/jj150575(v=exchg.150).aspx 


Q85. HOTSPOT - (Topic 6) 

You have an Exchange Server organization that contains four servers. The servers are configured as shown in the following table. 


SiteA contains an IP gateway that uses a dial plan named Dialplan1. SiteB contains a Lync 

Server 2013 server that uses a dial plan named Dialplan2. 

You plan to migrate all Unified Messaging (UM) functionalities to Exchange Server 2013. 

You need to identify which tasks must be performed to complete the migration. 

Which tasks should you identify? (To answer, select the tasks that are required and not 

required in the answer area.) 


Answer: 



70-342 free draindumps

Renew ms exam 70-342:

Q86.  (Topic 6) 

You have an Exchange Server organization that contains five servers. The servers are configured as shown in the following table. 


You need to create a Lync Server SIP Unified Messaging (UM) dial plan to enable voice integration between Lync Server and Exchange Server. 

Which three Exchange servers should you associate to the UM dial plans? (Each correct answer presents part of the solution. Choose three.) 

A. EX1 

B. EX2 

C. EX3 

D. EX4 

E. EX5 

Answer: C,D,E 

Explanation: 

C: You can enable Unified Messaging (UM) in Microsoft Exchange Server 2010. You must enable the Exchange computer running the Unified Messaging server role before the Unified Messaging server can process calls for UM-enabled Exchange 2010 recipients in your Exchange organization. However, the Unified Messaging server also must be added to a UM dial plan before it can process calls for Unified Messaging. 

D, E: 

* Requirements and Recommendations Client Access and Mailbox. In Microsoft Exchange Server 2013, Exchange UM runs as a service on these servers. 

* Deploy the Exchange Mailbox server roles in each Exchange Unified Messaging (UM) forest where you want to enable users for Exchange UM. 

Reference: Configuring Unified Messaging on Microsoft Exchange Server to Work with Lync Server 2013 


Q87. DRAG DROP - (Topic 6) 

You are an administrator for a company named Contoso, Ltd. The company is an international reseller that has offices worldwide. One of the offices is located in France. 

Each office contains several servers that have Exchange Server 2013 installed. The Exchange Server organization is configured for Unified Messaging (UM). Each office contains an IP-PBX device. 

You need to ensure that callers to the France office can navigate the voice mail system menu in French. 

In which order should you perform the actions? 

To answer, move all actions from the list of actions to the answer area and arrange them in the correct order. 


Answer: 



Q88.  (Topic 6) 

You have an Exchange Server 2013 organization that contains 10 servers. 

You have a federation trust to the Microsoft Federation Gateway. The certificate in the trust relationship expires soon. 

You need to replace the certificate. The solution must minimize downtime. 

You purchase a new certificate. 

What should you do next? 

A. On all of the Exchange servers, import the certificate, and then run the New-FederationTrust cmdlet. 

B. On all of the Exchange servers, import the certificate, and then run the Set-OrganizationRelationship cmdlet. 

C. On one of the Exchange servers, import the certificate, and then run the Set-FederationTrust cmdlet. 

D. On one of the Exchange servers, import the certificate, and then run the Set-FederatedOrganizationldentifier cmdlet. 

Answer: C 

Explanation: 

You can use the Set-FederationTrust cmdlet to manage the certificates used for the federation trust. You can also use the Set-FederationTrust cmdlet to refresh the metadata document from the Microsoft Federation Gateway and download its certificate. 

Example: This example configures the federation trust Microsoft Federation Gateway to use the certificate with the thumbprint AC00F35CBA8359953F4126E0984B5CCAFA2F4F17 as the next certificate. Set-FederationTrust -Identity "Microsoft Federation Gateway" -Thumbprint AC00F35CBA8359953F4126E0984B5CCAFA2F4F17 


Q89. DRAG DROP - (Topic 6) 

You have an Exchange Server organization. The organization contains servers that have Exchange Server 2010 and Exchange Server 2013 installed. 

A new compliance policy requires that all email messages remain stored for two years. 

You create two retention tags named Tag1 and Tag2. Tag1 moves the email messages to an Archive mailbox after one year. Tag2 permanently deletes the email messages after two years. 

You need to meet the compliance policy requirements. The solution must ensure that all email messages that are older than two years are removed as quickly as possible. 

Which three actions should you perform? 

To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order. 


Answer: 



Q90. DRAG DROP - (Topic 6) 

You have an Exchange Server 2013 organization that contains two Mailbox servers and two Client Access servers. 

You have an Active Directory Rights Management Services (AD RMS) cluster. Information Rights Management (IRM) is enabled for the Exchange Server organization. 

All company executives are in a security group named Execs. All of the executives use smartphones that are managed by using a mobile device mailbox policy. The executives frequently read IRM-protected email messages by using Microsoft Outlook. 

You need to ensure that the executives can read the IRM-protected messages on their smartphone. 

Which task should you perform in each environment? (To answer, drag the appropriate tasks to the correct environments. Each task may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.) 


Answer: