getcertified4sure.com

Advanced Guide: braindumps 70-342




Microsoft certification is the planets many well-respected global certification. So 70-342 is quite required for those who are anxious to penetrate the particular This organization. But its very hard for those who are hectic working or researching to pass the particular Advanced Solutions of Microsoft Exchange Server 2013 test. Testking Microsoft 70-342 research manuals can help you saving a lot of moment,vitality and also useful resource in the 70-342 test. You can deal with this particular 70-342 test efficiently by our 70-342 pdf and also test powerplant. Were able to keep the item promptly and invite visitors to understand Microsoft knowledge quickly. You can also down load the particular Microsoft 70-342 pdf demo version free.

2021 Aug 70-342 online training:

Q91. DRAG DROP - (Topic 6) 

You have a server that has Exchange Server 2013 installed. 

You plan to configure Unified Messaging (UM) to connect to an IP-PBX. 

A telecommunications administrator configures the following numbers on the IP-PBX: 

First extension number: 12100 

Last extension number: 12499 

Help extension number: 12500 

Incoming pilot number: 12000 

You need to configure UM to support the following requirements: 

Users must be able to use Outlook Voice Access. 

Users must be able to receive voice mail when callers connect to the users' extension. 

Callers must be able to dial into an automated help system hosted by your company, which uses standard menus and speech-enabled menus. 

Which numbers should you use for the UM configurations? 

To answer, drag the appropriate number to the correct UM object in the answer area. Each number may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content. 


Answer: 



Q92.  (Topic 5) 

You discover that the Large Audience MailTip is not displayed when users compose an email message to the 20 new distribution groups. 

You need to ensure that the Large Audience MailTip is displayed for the new distribution groups immediately. 

Which cmdlet should you use? 

A. Set-DistributionGroup 

B. Set-MailboxServer 

C. Set-ClientAccessServer 

D. Start-ManagedFolderAssistant 

Answer: B 

Explanation: 

We need to use the Set-MailboxServer cmdlet with the ForceGroupMetricsGeneration parameter to force a count of the number of members of the distribution groups. 

The ForceGroupMetricsGeneration parameter specifies that group metrics information must be generated on the Mailbox server regardless of whether that server generates an offline address book (OAB). By default, group metrics are generated only on servers that generate OABs. Group metrics information is used by MailTips to inform senders about how many recipients their messages will be sent to. You need to use this parameter if your organization doesn't generate OABs and you want the group metrics data to be available. 


Q93. HOTSPOT - (Topic 6) 

You have an Exchange Server 2013 organization. 

You plan to implement a hybrid deployment with Microsoft Office 365. Active Directory Federation services (AD FS) will be used to provide Single Sign-On (SSO). Users will access the hybrid deployment by using Microsoft Outlook 2013 and mobile devices. 

A user named User1 changes the password for his on-promises Active Directory user account. 

You need to identify whether User1 will be prompted for a password when accessing his mailbox from various client types. 

In the table below identify whether User1 will be prompted for a password when accessing his mailbox from various clients. 

NOTE: Make only one selection in each row. 


Answer: 



Q94. HOTSPOT - (Topic 6) 

Your network contains two Active Directory sites named Site1 and Site2. 

You have an Exchange Server 2013 organization that contains six servers. The servers are configured as shown in the following table. 


All of the mailbox databases replicate to all of the servers. 

Users in Site1 connect to sitel-mail.contoso.com to access their mailbox. Users in Site2 connect to site2-mail.contoso.com to access their mailbox. All of the users use Microsoft Outlook 2013. 

You need to identify which DNS modification must be made to fail over the email services from Site1 to Site2. 

Which DNS modification should you identify? (To answer, select the appropriate record to modify and the new data for the record in the answer area.) 



Answer: 



Q95.  (Topic 6) 

You have an Exchange Server 2013 organization and a Microsoft Lync Server 2013 environment. 

You plan to integrate Lync Server 2013 and Exchange Server 2013 Unified Messaging (UM) services. 

You need to identify which actions will complete when you run the exchucutil.psl Windows PowerShell script. 

Which three actions should you identify? Each correct answer presents part of the solution. 

A. A UM hunt group will be created for each UM IP gateway 

B. Permission to read Active Directory UM container objects will be assigned to the Lync server 

C. The TLS listening port will be changed on the Client Access servers 

D. The Lync server will be added to the SIP dial plan 

E. A UM IP gateway will be created for each Lync Server pool 

F. A UM auto attendant will be created for each UM IP gateway 

Answer: A,B,E 

Explanation: 

When you’re integrating Microsoft Lync Server with Exchange Unified Messaging (UM), you have to run the ExchUcUtil.ps1 script in the Shell. The ExchUcUtil.ps1 script does the following: 

* Creates a UM hunt group for each UM IP gateway. The pilot identifier of each hunt group specifies the UM SIP URI dial plan used by the Lync Server Front End pool or Standard Edition server that’s associated with the UM IP gateway. 

* Grants Lync Server permission to read Active Directory UM container objects such as UM dial plans, auto attendants, UM IP gateways, and UM hunt groups. 

* Creates a UM IP gateway for each Lync Server pool. 

Reference: Configure UM to work with Lync Server 

https://technet.microsoft.com/en-us/library/jj966276%28v=exchg.150%29.aspx 


70-342 exam guide

Far out 70-342 objectives:

Q96. HOTSPOT - (Topic 6) 

You have an Exchange Server 2013 organization that contains the servers configured as shown in the following table. 


All of the Exchange servers run Windows Server 2012 R2 and are members of a database availability group (DAG) named DAG1. Each server has a copy of all the mailbox databases. DAG1 is configured to have a cluster administrative access point. 

You plan to take the servers offline to perform routine maintenance. 

You need to identify the maximum number of servers that can fail simultaneously during the maintenance period without affecting mailbox access of the users. 

What should you identify? To answer, select the appropriate options in the answer area. 


Answer: 



Q97. HOTSPOT - (Topic 6) 

Your company has a main office and a disaster recovery site. An Active Directory site named MainSite exists for the main office. An Active Directory site named DRSite exists for the disaster recovery site. The two sites connect to each other by using a WAN link. All users work in the main office. 

You have an Exchange Server 2013 organization. The organization contains six servers. The servers are configured as shown in the following table. 


All of the Mailbox servers are members of a database availability group (DAG) named 

DAG1. 

After a WAN link failure, you discover that all of the active mailbox database copies are 

located on MBX3, even though MBX1 and MBX2 are still running. 

You need to prevent an automatic failover of DAG1 if the WAN link between the two sites 

fails but the servers in both sites are still running. 

The solution must prevent two active copies of the same database. 

What should you do? (To answer, select the appropriate options in the answer area.) 



Answer: 



Q98.  (Topic 6) 

You are an administrator for a company named Contoso, Ltd. 

Contoso has an Exchange Server 2013 organization. 

Contoso has a partnership agreement with a company named A. Datum Corporation. A. 

Datum has an Exchange server 2013 organization. 

Both organizations have a federation trust to the Microsoft Federation Gateway. Users at 

Contoso plan to share their free/busy information with users at A. Datum. 

You need to recommend which tasks must be performed to ensure that the A. Datum users 

can see the free/busy information of the Contoso users. 

Which two actions should you recommend? (Each correct answer presents part of the 

solution. Choose two.) 

A. In the Exchange Server organization of Contoso, configure directory synchronization. 

B. In the Exchange Server organization of A. Datum, create a sharing policy. 

C. In the Exchange Server organization of A. Datum, configure directory synchronization. 

D. In the Exchange Server organization of Contoso, create an organization relationship. 

E. In the Exchange Server organization of Contoso, create a sharing policy. 

F. In the Exchange Server organization of A. Datum, create an organization relationship. 

Answer: D,E 

Explanation: 

Business-to-business calendar sharing is set up by creating organization relationships. User-to-user calendar sharing is set up by applying sharing policies. 

There is no requirement for Contoso users to view the free/busy information of the A.Datum users. Therefore, we don’t need to create an organization relationship in A.Datum. 

Configure Federated Sharing Step 1: Create and configure a federation trust (this has already been done here) Step 2 (D): Create an organization relationship An organization relationship enables users in your Exchange organization to share calendar free/busy information as part of federated sharing with other federated Exchange organizations. 

Step 3 (E): Create a sharing policy Sharing policies enable user-established, people-to-people sharing of both calendar and contact information with different types of external users. They support the sharing of calendar and contact information with external federated organizations, external non-federated organizations, and individuals with Internet access. If you don’t need to configure people-to-people or contact sharing (organization-level sharing only), you don’t need to configure a sharing policy. Step 4: Configure an Autodiscover public DNS record 

Note: With federated sharing, users in your on-premises Exchange organization can share free/busy calendar information with recipients in other Exchange organizations that are also configured for federated sharing. Free/busy sharing can be enabled between two organizations running Exchange 2013 and also between organizations with a mixed Exchange deployment. 


Q99.  (Topic 6) 

Your company has an Exchange Server 2013 organization named Contoso. 

A partner company has an Exchange Server 2013 organization named Fabrikam. Neither company has any trusts between their forests. 

Users from both organizations access their mailbox from the Internet by using Outlook Anywhere. 

You need to ensure that the users from both organizations can share free/busy information. 

Which two cmdlets should you run? (Each correct answer presents part of the solution. Choose two.) 

A. New-AcceptedDomain 

B. Add-AvailabilityAddressSpace 

C. Set-AvailabilityConfig 

D. New-SharingPolicy 

E. Add-ADPermission 

Answer: B,D 

Explanation: 

B: Use the Add-AvailabilityAddressSpace cmdlet to define the access method and associated credentials used to exchange free/busy data across forests. 

D: Use the New-SharingPolicy cmdlet to create a sharing policy to regulate how users inside your organization can share calendar and contact information with users outside the organization. Users can only share this information after federation has been configured in Exchange. 


Q100. HOTSPOT - (Topic 6) 

You run the Get-ExchangeCertificate –Server Ex2 | fl and you receive the following output. 


Use the drop-down area to select the appropriate answers. 


Answer: