NEW QUESTION 1
Refer to the Exhibit.

An administrator receives an error on a vSphere cluster as shown in the Exhibit.
Based on the exhibit, which three configuration changes can resolve the error? (Choose three.)

• A. Change the Admission Control policy for the cluster.
• B. Adjust CPU and Memory reservations of the virtual machines.
• C. Increase the amount of failover resources in the cluster.
• D. Reconfigure the ESXi host cluster for High Availability.
• E. Disable Virtual Machine Monitoring.

Answer: ABC

Explanation: This is the case of insufficient resources. Change the admission control policy for the cluster and adjust CPU and memory reservations of the VMs. The third logical way to address this problem is to increase failover resources in the cluster.

NEW QUESTION 2
An administrator is building a large virtual machine that will require as many vCPUs as the host can support. An ESXi 6.x host has these specifications:
✑ Six 32-core Intel Xeon Processors
✑ 256 GB of Memory
✑ 512 GB Local disk space using VMFS5
What is the maximum number of virtual CPUs that the virtual machine can be allocated?

• A. 64
• B. 128
• C. 192
• D. 256

Answer: B

Explanation: Reference: http://www.intel.com/content/dam/www/public/us/en/documents/white-papers/virtualization-xeon-core-count-impacts-performance-paper.pdf

NEW QUESTION 3
An administrator suspects that the MTU value for a vSphere Standard Switch is misconfigured.
Which two commands can determine the value? (Choose two.)

• A. esxcfg-vswitch –l
• B. esxcli network vswitch standard list
• C. esxcfg-vss –l
• D. esxcli network standard vswitch list

Answer: AB

Explanation: Reference: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC
&externalId=1007654

NEW QUESTION 4
A vSphere Replication user needs to connect a source site to a target site. What privilege is needed at both sites?

• A. VRM remote.Manage VRM
• B. VRM datastore mapper.Manage
• C. Host.vSphere Replication.Manage replication
• D. Virtual machine.vSphere Replication.Manage replication

Answer: A

Explanation: When connecting sites, users at both sites must have VRM remote.Manage VRM privilege. When you connect sites that are part of the same SSO, you need to select the target site only without providing authentication details, as you are already logged in. After connecting the sites, you can monitor the connectivity state between them at Target Sites tab.
Reference: https://pubs.vmware.com/vsphere-55/topic/com.vmware.ICbase/PDF/vsphere-replication-55-admin.pdf

NEW QUESTION 5
An administrator is configuring an identity source for Single Sign-On. The administrator will use the machine that Single Sign-On is running on, but does not want all users on the machine to be visibile to SSO.
Which Identity Source meets this requirement?

• A. Active Directory (Integrated Windows Authentication)
• B. Active Directory as an LDAP Service
• C. OpenLDAP
• D. LocalOS

Answer: A

NEW QUESTION 6
What are two limitations of Link Aggregation Control Protocol (LACP) on a vSphere Distributed Switch? (Choose two.)

• A. IP Hash load balancing is not a supported Teaming Policy.
• B. Software iSCSI multipathing is not compatible.
• C. Link Status Network failover detection must be disabled.
• D. It does not support configuration through Host Profiles.

Answer: BD

NEW QUESTION 7
Which statement is true for the Path Selection Plug-In VMW_PSP_MRU?

• A. VMW_PSP_MRU is default for a majority of active-active and active-passive arrays.
• B. VMW_PSP_MRU will remain on the selected path even if the state were to change.
• C. VMW_PSP_MRU is recommended for Virtual SAN.
• D. VMW_PSP_MRU will have no preferred path setting for the Plug-In.

Answer: D

Explanation: The host selects the path that it used most recently. When the path becomes unavailable, the host selects an alternative path. The host does not revert back to the original path when that path becomes available again. There is no preferred path setting with the MRU policy. MRU is the default policy for active-passive storage devices.
Reference: http://pubs.vmware.com/vsphere-60/index.jsp?topic=%2Fcom.vmware.vcli.examples.doc%2Fcli_manage_storage.6.7.html

NEW QUESTION 8
An administrator tries to connect the vSphere 5.5 Client to an ESXi 6.x host. What will happen when this takes place?

• A. The operation will fail, since the vSphere Client is deprecated in vSphere 6.x.
• B. The operation will fail and the administrator will need to delete the client and install the6.x version.
• C. The operation will prompt the administrator to run a script to upgrade the vSphere Client.
• D. The operation will update the vSphere Client silently in the background, then connect.

Answer: C

Explanation: The operation will fail because vSphere client 5.5 is deprecated in vSphere 6.x. You simply cannot connect a 5.5 vsphere client to a 6.x host because they are not compatible.

NEW QUESTION 9
An administrator is creating a new Content Library. It will subscribe to another remote Content Library without authentication enabled. Optimal performance is desired for the configuration.
What two steps should be taken to set up the library? (Choose two.)

• A. The Subscription URL should be provided.
• B. The library should be published externally.
• C. A file system should be used for this library.
• D. A datastore should be used for this library.

Answer: AD

NEW QUESTION 10
Which two statements are true regarding upgrading ESXi 6.x hosts using a USB flash
drive? (Choose two.)

• A. The ks.cfg file must be available to the ESXi 6.x host during bootup on a TFTP server.
• B. The USB flash drive must be formatted using Fat32.
• C. A partition table must be manually created on the USB flash device.
• D. The USB flash drive must be mounted from a Windows device with sysconfig installed.

Answer: BC

NEW QUESTION 11
An administrator is configuring Storage I/O Control. After enabling, the administrator notices high device latency and poor storage performance.
Which two actions would likely reduce latency and improve functionality? (Choose two.)

• A. Set the congestion threshold to 15ms
• B. Set the congestion threshold value to 5ms
• C. Ensure that each datastore has independent spindles
• D. Ensure that each datastore uses shared spindles

Answer: AC

NEW QUESTION 12
An administrator has recently configured HA on a cluster. After reviewing the summary tab
on one of the hosts, the warning in Exhibit 1 is displayed:

The administrator proceeds to view the management network port group data shown in Exhibit 2:

The administrator then views the management network vSwitch as shown in Exhibit 3:

Based on the exhibits, which two steps should be taken to ensure redundancy on the management network? (Choose two.)

• A. Move vmnic1 to Standby adapters.
• B. Add an additional vmknic to the Network Adapters and move it to Active adapters.
• C. Set the advanced HA configuration parameter das.ignoreRedundantNetWarning to True.
• D. Uncheck the Override Failover Checkbox on the management network port group.

Answer: AD

Explanation: Enabling redundancy is important for fault tolerance. Move vmnic1 to standby adapters and
uncheck the override failover checkbox on the management network port group.

NEW QUESTION 13
Refer to the Exhibit.

An administrator has created the DRS cluster shown in the Exhibit. Based on the exhibit, which statement is true?

• A. Under CPU contention, Prod-VM1 receives four times the CPU resources than Test- VM1.
• B. The Prod-VM1 will always have more CPU resources than all other virtual machines.
• C. The Test-VM2 will always have less CPU resources than all other virtual machines.
• D. Under CPU contention, Test-VM1 will receive 25% of the total CPU resources.

Answer: A

Explanation: Prod-VM1 will receive four times the CPU resources the Test-VM1 because the CPU contention is high compared to the test resource pool.

NEW QUESTION 14
Which two scenarios could cause Storage DRS to be disabled on a Virtual Disk (VMDK)? (Choose two.)

• A. The VMDK is an independent disk.
• B. The virtual machine has vSphere Fault Tolerance enabled.
• C. The VMDK is hosted on NFS storage.
• D. The virtual machine has a CD-ROM/ISO image connected.

Answer: AB

Explanation: Reference: https://pubs.vmware.com/vsphere-51/index.jsp?topic=%2Fcom.vmware.vsphere.troubleshooting.doc%2FGUID-B749AAA0-7B67-4A79-BEDC-395DFEC9FC60.html

Topic 10, Administer and Manage vSphere Virtual Machines

NEW QUESTION 15
An administrator is attempting to enable Legacy Fault Tolerance (FT) on a virtual machine and observes the following in the vSphere Web Client:
Fault Tolerance has not been licensed on host <hostname>.
What is the minimum licensed edition that supports this configuration?

• A. Standard
• B. Enterprise
• C. Enterprise Plus
• D. Essentials Plus

Answer: A

Explanation: Fault Tolerance is not licensed in all editions of VMware vSphere. Check the edition you are running and upgrade to an edition that includes Fault Tolerance.
Reference: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC
&externalId=1033634

NEW QUESTION 16
A device's vStorage API for Array Integration (VAAI) support status command line output shows:
naa.500253825002a865 VAAI Plugin Name: ATS Status: unsupported Clone Status: unsupported Zero Status: supported Delete Status: unsupported
What is the corresponding VAAI support status in the vSphere Web Client?

• A. Unknown
• B. Supported
• C. Not supported
• D. Unsupported

Answer: A

Explanation: The VAAI support status will be unknown. Reference: https://pubs.vmware.com/vsphere-55/index.jsp?topic=%2Fcom.vmware.vsphere.storage.doc%2FGUID-0520FD37-D7AD-4FBA-9A2E-E5F8211FCBBB.html

NEW QUESTION 17
An administrator creates a Private VLAN with a Primary VLAN ID of 2. The administrator then creates three Private VLANs as follows:
✑ Marketing
✑ PVLAN ID. 4
✑ PVLAN Type. Isolated
✑ Accounting
✑ PVLAN ID. 5
✑ PVLAN Type. Community
✑ Secretary
✑ PVLAN ID. 17
✑ PVLAN Type. Isolated
Users in the Accounting PVLAN are reporting problems communicating with servers in the Marketing PVLAN.
Which two actions could the administrator take to resolve this problem? (Choose two.)

• A. Change the PVLAN type for the Accounting network to Promiscuous.
• B. Change the PVLAN ID for the Accounting network to 2.
• C. Change the PVLAN type for Marketing network to Promiscuous.
• D. Change the PVLAN ID for Accounting network to 4.

Answer: AB

Explanation: Change the PVLAN type for the accounting network to Promiscuous and the PVLAN ID to
2. This way, the servers in Marketing PVLAN will communicate effectively.

NEW QUESTION 18
An administrator is attempting to enable Fault Tolerance on a virtual machine with 4 vCPUs and observes the following in the vSphere Web Client:
Fault Tolerance has not been licensed on host <hostname>.
What is the minimum licensed edition that supports this configuration?

• A. Enterprise
• B. Enterprise Plus
• C. Standard
• D. Essentials Plus

Answer: A

Explanation: Fault Tolerance is not licensed in all editions of VMware vSphere. Check the edition you are running and upgrade to an edition that includes Fault Tolerance.
Reference: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC
&externalId=1033634

NEW QUESTION 19
Which VMware Single Sign-On component handles STS authentication requests?

• A. Security Token Service
• B. Administration Server
• C. VMware Directory Service
• D. Identity Management Service

Answer: D

NEW QUESTION 20
Which file determines the location of the installation script during a scripted upgrade?

• A. boot.cfg
• B. ks.cfg
• C. script.cfg
• D. upgrade.cfg

Answer: A

Explanation: You can Modify the boot.cfg file to specify the location of the installation or upgrade script using the kernelopt option.

Topic 5, Administer and Manage vSphere Resources