NEW QUESTION 1
Which two fields are required parameters when manually creating users on Cisco Unity Connection with predefined templates? (Choose two.)

• A. username (alias)
• B. extension
• C. first name and last name
• D. employee ID
• E. title

Answer: AB

NEW QUESTION 2
Users are complaining of problems when they make SIP calls by dialing URIs. To help users complete calls, what must you do?

• A. Adjust the URI lookup policy to case desensitive.
• B. Adjust the URI lookup policy to case sensitive.
• C. Adjust the URI lookup policy to case insensitive.
• D. Adjust the URI lookup policy to case nonsensitive.

Answer: C

NEW QUESTION 3
Refer to topology and Exhibits below:




What is the reason that this MGCP gateway is not registered with Cisco Unified Communications Manager?

• A. The primary server address is incorrect.
• B. The MGCP domain name is incorrect on either the Cisco Unified Communications Manager or the router.
• C. Backhaul/Redundant link port is incorrect
• D. This MGCP gateway is not down; it is operational.

Answer: B

NEW QUESTION 4
An engineer notices that some SCCP phones are not displaying the correct time, but the phones are registered and working property. Which three options should be performed in Cisco Unified Communications Manager to fix the phone time issue' (Choose three.)

• A. Verify that the device pool has the coned Date/Time Group configured.
• B. Ensure that the phone on time field on the phone configuration page is chosen.
• C. Check the CUCM OS Admin page to ensure that NTP servers are accessible.
• D. Verify that the Date/Time Group has the correct phone NTP reference configured.
• E. Check the phone NTP Reference configuration for configured server.
• F. Verify that the Date/Time group has the correct time zone configured.

Answer: ADF

NEW QUESTION 5
Refer to the exhibit.

ACustomer has two Cisco Unified Communications Manager clusters (NY and CAL). The customer recently tried to enable intercluster communication between these clusters. When NY users call CAL, they get a
fast-busy tone. A network administrator collects Cisco CallManager traces and sees the displayed SIP message coming from the remote Cisco Unified Communication Manager (CAL cluster). What is a likely reason for this?

• A. Cisco CallManager service is shut down on the CAL cluster.
• B. The SIP service is shut down on the CAL cluster.
• C. The SIP trunk on the CAL cluster is configured incorrectly.
• D. Cisco CTI Manager service is shut down on the CAL cluster.
• E. The remote Cisco IP phone is not registered.

Answer: E

NEW QUESTION 6
An inbound call from the PSTN is not reaching the directory number that it is calling. When the PSTN phone calls the correct DID, only a dial tone is heard. Which command resolves this issue?

• A. (config-dial-peer)#direct-inward-dial
• B. (config-controller)# no provide-outside-dialtone
• C. (config-if)#no dial-tone
• D. (config-dial-peer)# no dial-tone
• E. (config-if)#direct-inward-dial
• F. (config) allow inbound dial-peer 1

Answer: A

NEW QUESTION 7
Which command is used on an IOS Router that is acting as a SAF Forwarder to confirm its registration status with a SAF Client?

• A. show ip asf-forwarder status details
• B. show ospf neighbor details
• C. show ip interface details
• D. show cdp neighbor details
• E. show eigrp service-family ipv4 clients details
• F. show service-family asf-forwarder details

Answer: E

NEW QUESTION 8
Refer to the exhibit.

When Phone A makes a Call to Phone C, this message is observed Cause i = 0x80C1 – Bearer capability not implemented.
How do you resolve this error?

• A. Reset Phone A
• B. Migrate Phone A from SCCP to SIP
• C. Set the bearer capability on the gateway to match the provider capability
• D. Open a Cisco TAC case

Answer: C

NEW QUESTION 9
Users of your local Cisco Unified Communications Manager cluster report that they receive error “Login is unavailable (23)” when they try to log in to Extension Mobility. Which reason for this error is true?

• A. User provided the wrong UserID or PIN
• B. User has no Extension Mobility profiles assigned.
• C. The given user ID is not found n any of the remote clusters.
• D. Phone is not subscribed to Extension Mobility phone service.

Answer: C

NEW QUESTION 10
Cisco Unified Communications Manager failed to register with the Cisco SAF Forwarder. Assuming that the Cisco IOS SAF Forwarder is configured correctly, which minimum configuration would be needed on Cisco Unified Communications Manager to test registration?

• A. SAF trunk, SAF security profile, Cisco SAF Forwarder, and CCD advertising service
• B. SAF trunk, SAF security profile, Cisco SAF Forwarder, and CCD requesting service
• C. SAF trunk, SAF security profile, Cisco SAF Forwarder, CCD requesting service, and CCD advertising service
• D. SAF trunk, SAF security profile, and Cisco SAF Forwarder
• E. SAF trunk, CCD requesting service, and CCD advertising service

Answer: B

NEW QUESTION 11
You have been presented with a trouble ticket from an end user who works at a remote location that is served by a Cisco Unified Communications Manager Express. The user reports being unable to place calls to international numbers, but all other calls work properly and other users at this location can place international calls. Which two troubleshooting techniques would be helpful in resolving this issue? (Choose two.)

• A. Cisco IOS debug tools
• B. Class of Restriction baseline configuration for the user on Cisco Unified Communications Manager Express
• C. show output of the ephone anDEphone-dn configurations
• D. show output of the voice translation rules in the voice gateway
• E. show output for the T1 controller and voice port configuration in the voice gateway

Answer: AB

NEW QUESTION 12
In Cisco Unified Communications Manager, what is the default maximum number of learned patterns for the call control discovery feature parameter?

• A. 5000
• B. 10000
• C. 20000
• D. 500
• E. 50000

Answer: C

NEW QUESTION 13
When dialing any external SIP URI for ABusiness-to-business call, an endpoint that is registered to the Cisco VCS Control fails to locate the remote endpoint. The same endpoint can successfully call another endpoint that is registered to the Cisco VCS Expressway. How do you resolve this issue?

• A. Add traversal call licensing on the Cisco VCS Expressway.
• B. Add traversal call licensing on the Cisco VCS Control.
• C. Add a multisite option to the endpoint.
• D. Configure a proper DNS zone on the Cisco VCS Expressway.
• E. Configure a traversal zone between the Cisco VCS Control and the Cisco VCS Expressway.
• F. Configure a SIP route pattern in Cisco Unified Communications Manager.

Answer: D

NEW QUESTION 14
Refer to the exhibit.

Assuming that the two Cisco SAF Forwarders are adjacent to each other and that no SAF clients have been configured, which statement is true?

• A. The Cisco SAF Forwarders will not establish a neighbor relationship because the service-family external-client configuration is missing.
• B. The Cisco SAF Forwarders will not establish a neighbor relationship because the eigrp label CUCME should be replaced with SAF.
• C. The Cisco SAF Forwarders will not establish a neighbor relationship because the service-family external-client configuration is missing as well as the static neighbor configurations.
• D. The Cisco SAF Forwarders will establish a neighbor relationshi
• E. No further configuration is required.
• F. Cisco SAF Forwarders will not establish a neighbor relationship until the SAF clients are configured and registered to the Cisco SAF Forwarders.

Answer: D

NEW QUESTION 15
Which Cisco IOS command is used to display information for active connections that are controlled by the Media Gateway Control Protocol?

• A. show mgcp connection
• B. show mgcp statistics
• C. show mgcp endpoint
• D. show mgcp nas

Answer: A

NEW QUESTION 16
When user attempted to call a Colleague at the same site, the caller received a recording that the call could not be completed as dialed. Which two actions can you take to troubleshoot the problem? (Choose two.)

• A. Reboot the IP phone that the user attempted to call.
• B. Verity that the partition and calling search space are correct.
• C. Reboot the user's IP phone.
• D. Reboot the Cisco Unified communications Manager Cluster.
• E. Ping the remote gateway to verify connectivity.
• F. Use RTMT to trace the call from DN to DN.

Answer: BE

NEW QUESTION 17
Users are reporting intermittent poor audio quality on VoIP calls. Which configuration area requires troubleshooting?

• A. network QoS
• B. media resource
• C. call routing
• D. phone setup

Answer: A

NEW QUESTION 18
Refer to the exhibit.

Local 10-digit dialing in the North American Numbering Plan to area Code 456 is failing. Which two changes are needed to enable 10-digit dialing? (Choose two.)

• A. Change dial peer 210 to destination-pattern 456.......
• B. Change dial peer 210 to destination-pattern 9456.......
• C. Change dial peer 210 to port 0/0/0:23.
• D. Remove the command prefix 456 from dial peer 210.

Answer: BC

NEW QUESTION 19
Two Cisco Unified Communications Manager clusters have recently been installed. One is in Tokyo and the other in Chicago connected by a WAN link. You have started the configuration of a SIP trunk and you are integrating the dial plans. All phones in Tokyo can call all phones in Chicago, but no phones in Chicago can
call Tokyo phones. Which two statements are possible causes? (Choose two.)

• A. The CSS of the Chicago phones does not include the partition of the route pattern to point to Tokyo.
• B. The SIP trunk in Chicago is in ACSS that is not in the partition of the Chicago phones.
• C. The Tokyo SIP trunk inbound CSS does not contain the partition of the Tokyo phones.
• D. Tokyo phones are in ACSS that is not in the partition of the route pattern to call from Tokyo to Chicago.
• E. The SIP trunk is configureDFrom Tokyo to Chicago, but not from Chicago to Tokyo.

Answer: AC

NEW QUESTION 20
An engineer is troubleshooting an intersite call between two endpoints where calls are intermediately failing with the error message: “488 Not Acceptable Media”. Which option causes this error message to trigger?

• A. The device pool contains more call processing agents in the CMG group than the endpoint can support.
• B. MRGL contains more media groups than the endpoint can support.
• C. A lower bandwidth is set in the location than the endpoint can support.
• D. The hunt group contains more devices than the endpoint can support.

Answer: C