70-411 Exam
Examples of exam 70 411
Want to know Pass4sure 70 411 pdf Exam practice test features? Want to lear more about Microsoft Administering Windows Server 2012 certification experience? Study Actual Microsoft 70 411 administering windows server 2012 r2 pdf answers to Updated 70 411 exam dumps questions at Pass4sure. Gat a success with an absolute guarantee to pass Microsoft 70 411 administering windows server 2012 r2 pdf (Administering Windows Server 2012) test on your first attempt.
Q81. HOTSPOT
Your network contains a DNS server named Server1 that runs Windows Server 2012 R2. Server1 has a zone named contoso.com. The network contains a server named Server2 that runs Windows Server 2008 R2. Server1 and Server2 are members of an Active Directory domain named contoso.com.
You change the IP address of Server2.
Several hours later, some users report that they cannot connect to Server2.
On the affected users' client computers, you flush the DNS client resolver cache, and the users successfully connect to Server2.
You need to reduce the amount of time that the client computers cache DNS records from contoso.com.
Which value should you modify in the Start of Authority (SOA) record? To answer, select the appropriate setting in the answer area.
Answer:
Q82. Your network contains an Active Directory domain named contoso.com. The domain contains five servers. The servers are configured as shown in the following table.
All desktop computers in contoso.com run Windows 8 and are configured to use BitLocker Drive Encryption (BitLocker) on all local disk drives.
You need to deploy the Network Unlock feature. The solution must minimize the number of features and server roles installed on the network.
To which server should you deploy the feature?
A. Server1
B. Server2
C. Server3
D. Server4
E. Server5
Answer: E
Explanation:
The BitLocker Network Unlock feature will install the WDS role if it is not already installed. If you want to install it separately before you install BitLocker Network Unlock you can use Server Manager or Windows PowerShell. To install the role using Server Manager, select the Windows Deployment Services role in Server Manager.
Q83. Your network contains two Active Directory forests named contoso.com and adatum.com. The contoso.com forest contains a server named Server1.contoso.com. The adatum.com forest contains a server named server2. adatum.com. Both servers have the Network Policy Server role service installed.
The network contains a server named Server3. Server3 is located in the perimeter network and has the Network Policy Server role service installed.
You plan to configure Server3 as an authentication provider for several VPN servers.
You need to ensure that RADIUS requests received by Server3 for a specific VPN server are always forwarded to Server1.contoso.com.
Which two should you configure on Server3? (Each correct answer presents part of the solution. Choose two.)
A. Remediation server groups
B. Remote RADIUS server groups
C. Connection request policies
D. Network policies
E. Connection authorization policies
Answer: B,C
Explanation:
To configure NPS as a RADIUS proxy, you must create a connection request policy that contains all of the information required for NPS to evaluate which messages to forward and where to send the messages.
When you configure Network Policy Server (NPS) as a Remote Authentication Dial-In User Service (RADIUS) proxy, you use NPS to forward connection requests to RADIUS servers that are capable of processing the connection requests because they can perform authentication and authorization in the domain where the user or computer account is located. For example, if you want to forward connection requests to one or more RADIUS servers in untrusted domains, you can configure NPS as a RADIUS proxy to forward the requests to the remote RADIUS servers in the untrusted domain. To configure NPS as a RADIUS proxy, you must create a connection request policy that contains all of the information required for NPS to evaluate which messages to forward and where to send the messages.
When you configure a remote RADIUS server group in NPS and you configure a connection request policy with the group, you are designating the location where NPS is to forward connection requests.
References: http: //technet. microsoft. com/en-us/library/cc754518. aspx
http: //technet. microsoft. com/en-us/library/cc754518. aspx
http: //technet. microsoft. com/en-us/library/cc754518. aspx
Q84. Your network contains two Active Directory forests named contoso.com and adatum.com.
All domain controllers run Windows Server 2012 R2.
The adatum.com domain contains a Group Policy object (GPO) named GPO1. An administrator from adatum.com backs up GPO1 to a USB flash drive. You have a domain controller named dc1.contoso.com. You insert the USB flash drive in
dc1.contoso.com.
You need to identify the domain-specific reference in GPO1.
What should you do?
A. From the Migration Table Editor, click Populate from Backup.
B. From Group Policy Management, run the Group Policy Modeling Wizard.
C. From Group Policy Management, run the Group Policy Results Wizard.
D. From the Migration Table Editor, click Populate from GPO.
Answer: A
Q85. Your network contains an Active Directory domain named contoso.com.
All user accounts reside in an organizational unit (OU) named OU1.
You create a Group Policy object (GPO) named GPO1. You link GPO1 to OU1. You
configure the Group Policy preference of GPO1 to add a shortcut named Link1 to the desktop of each user.
You discover that when a user deletes Link1, the shortcut is removed permanently from the desktop.
You need to ensure that if a user deletes Link1, the shortcut is added to the desktop again. What should you do?
A. Enforce GPO1.
B. Modify the Link1 shortcut preference of GPO1.
C. Enable loopback processing in GPO1.
D. Modify the Security Filtering settings of GPO1.
Answer: B
Explanation:
Replace Delete and recreate a shortcut for computers or users. The net result of the Replace action is to overwrite the existing shortcut. If the shortcut does not exist, then the Replace action creates a new shortcut.
This type of preference item provides a choice of four actions: Create, Replace, Update, and Delete. The behavior of the preference item varies with the action selected and whether the shortcut already exists.
Refernces: http: //technet.microsoft.com/en-us/library/cc753580.aspx http: //technet.microsoft.com/en-us/library/cc753580.aspx
Q86. Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2.
A domain controller named DO has the ADMX Migrator tool installed. You have a custom Administrative Template file on DC1 named Template1.adm.
You need to add a custom registry entry to Template1.adm by using the ADMX Migrator tool.
Which action should you run first?
A. Load Template
B. New Policy Setting
C. Generate ADMX from ADM
D. New Category
Answer: C
Explanation:
The ADMX Migrator provides two conversion methods — through the editor or through a command-line program. From the ADMX Editor, choose the option to Generate ADMX from ADM. Browse to your ADM file, and the tool quickly and automatically converts it. You then can open the converted file in the editor to examine its values and properties and modify it if you wish. The ADMX Migrator Command Window is a little more complicated; it requires you to type a lengthy command string at a prompt to perform the conversions. However, it includes some options and flexibility not available in the graphical editor.
References: http: //technet. microsoft. com/pt-pt/magazine/2008. 02. utilityspotlight%28en-us%29. aspx http: //technet. microsoft. com/pt-pt/magazine/2008. 02. utilityspotlight%28en-us%29. aspx
Q87. You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the File Server Resource Manager role service installed.
Server1 has a folder named Folder1 that is used by the human resources department.
You need to ensure that an email notification is sent immediately to the human resources manager when a user copies an audio file or a video file to Folder1.
What should you configure on Server1?
A. a storage report task
B. a file screen exception
C. a file screen
D. a file group
Answer: C
Explanation:
Create file screens to control the types of files that users can save, and generate notifications when users attempt to save unauthorized files.
With File Server Resource Manager (FSRM) you can create file screens that prevent users
from saving unauthorized files on volumes or folders.
File Screen Enforcement:
You can create file screens to prevent users from saving unauthorized files on volumes or
folders. There are two types of file screen enforcement: active and passive enforcement.
Active file screen enforcement does not allow the user to save an unauthorized file.
Passive file screen enforcement allows the user to save the file, but notifies the user that
the file is not an authorized file. You can configure notifications, such as events logged to
the event log or e-mails sent to users and administrators, as part of active and passive file
screen enforcement.
Q88. HOTSPOT
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. All domain controllers run Windows Server 2012 R2 and are configured as DNS servers. All DNS zones are Active Directory-integrated. Active Directory Recycle Bin is enabled.
You need to modify the amount of time deleted objects are retained in the Active Directory Recycle Bin.
Which naming context should you use? To answer, select the appropriate naming context in the answer area.
Answer:
Q89. HOTSPOT
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Remote Access server role installed.
You need to configure the ports on Server1 to ensure that client computers can establish VPN connections to Server1. The solution must NOT require the use of certificates or pre-shared keys.
What should you modify?
To answer, select the appropriate object in the answer area.
Answer:
Q90. Your network contains an Active Directory domain named contoso.com.
A user named User1 creates a central store and opens the Group Policy Management Editor as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that the default Administrative Templates appear in GPO1.
What should you do?
A. Link a WMI filter to GPO1.
B. Copy files from %Windir%\Policydefinitions to the central store.
C. Configure Security Filtering in GPO1.
D. Add User1 to the Group Policy Creator Owners group.
Answer: B
Explanation:
In earlier operating systems, all the default Administrative Template files are added to the ADM folder of a Group Policy object (GPO) on a domain controller. The GPOs are stored in the SYSVOL folder. The SYSVOL folder is automatically replicated to other domain controllers in the same domain. A policy file uses approximately 2 megabytes (MB) of hard disk space. Because each domain controller stores a distinct version of a policy, replication traffic is increased.
In Group Policy for Windows Server 2008 and Windows Vista, if you change Administrative template policy settings on local computers, Sysvol will not be automatically updated with the new .admX or .admL files. This change in behavior is implemented to reduce network load and disk storage requirements, and to prevent conflicts between .admX files and.admL files when edits to Administrative template policy settings are made across different locales. To make sure that any local updates are reflected in Sysvol, you must manually copy the updated .admX or .admL files from the PolicyDefinitions file on the local computer to the Sysvol\PolicyDefinitions folder on the appropriate domain controller.
To take advantage of the benefits of .admx files, you must create a Central Store in the SYSVOL folder on a domain controller. The Central Store is a file location that is checked by the Group Policy tools. The Group Policy tools use any .admx files that are in the Central Store. The files that are in the Central Store are later replicated to all domain controllers in the domain.
To create a Central Store for .admx and .adml files, create a folder that is named PolicyDefinitions in the following location: \\FQDN\SYSVOL\FQDN\policies
Reference:
http: //support. microsoft. com/kb/929841