70-411 Exam
10 tips on 70 411 pdf
Validated of 70 411 pdf sample question materials and study guides for Microsoft certification for candidates, Real Success Guaranteed with Updated exam ref 70 411 pdf dumps vce Materials. 100% PASS Administering Windows Server 2012 exam Today!
Q51. Your network contains an Active Directory domain named adatum.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 is configured as a Network Policy Server (NPS) server and as a DHCP server.
The network contains two subnets named Subnet1 and Subnet2. Server1 has a DHCP scope for each subnet.
You need to ensure that noncompliant computers on Subnet1 receive different network policies than noncompliant computers on Subnet2.
Which two settings should you configure? (Each correct answer presents part of the solution. Choose two.)
A. The NAP-Capable Computers conditions
B. The NAS Port Type constraints
C. The Health Policies conditions
D. The MS-Service Class conditions
E. The Called Station ID constraints
Answer: C,D
Explanation:
The NAP health policy server uses the NPS role service with configured health policies and system health validators (SHVs) to evaluate client health based on administrator-defined requirements. Based on results of this evaluation, NPS instructs the DHCP server to provide full access to compliant NAP client computers and to restrict access to client computers that are noncompliant with health requirements.
If policies are filtered by DHCP scope, then MS-Service Class is configured in policy conditions.
Q52. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.
You enable and configure Routing and Remote Access (RRAS) on Server1.
You create a user account named User1.
You need to ensure that User1 can establish VPN connections to Server1.
What should you do?
A. Create a network policy.
B. Create a connection request policy.
C. Add a RADIUS client.
D. Modify the members of the Remote Management Users group.
Answer: A
Explanation:
Network policies are sets of conditions, constraints, and settings that allow you to designate who is authorized to connect to the network and the circumstances under which they can or cannot connect.
Network policies can be viewed as rules. Each rule has a set of conditions and settings.
Configure your VPN server to use Network Access Protection (NAP) to enforce health requirement policies.
References: http: //technet. microsoft. com/en-us/library/hh831683. aspx
http: //technet. microsoft. com/en-us/library/cc754107. aspx
http: //technet. microsoft. com/en-us/library/dd314165%28v=ws. 10%29. aspx
http: //technet. microsoft. com/en-us/windowsserver/dd448603. aspx
http: //technet. microsoft. com/en-us/library/dd314165(v=ws. 10). aspx
http: //technet. microsoft. com/en-us/library/dd469733. aspx
http: //technet. microsoft. com/en-us/library/dd469660. aspx
http: //technet. microsoft. com/en-us/library/cc753603. aspx
http: //technet. microsoft. com/en-us/library/cc754033. aspx
http: //technet. microsoft. com/en-us/windowsserver/dd448603. aspx
Q53. Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2. The domain contains 500 client computers that run Windows 8.1 Enterprise and Microsoft Office 2013.
You implement a Group Policy central store.
You need to modify the default Microsoft Office 2013 Save As location for all client computers. The solution must minimize administrative effort.
What should you configure in a Group Policy object (GPO)?
A. The Group Policy preferences
B. An application control policy
C. The Administrative Templates
D. The Software Installation settings
Answer: A
Explanation:
Group Policy preferences provide the means to simplify deployment and standardize configurations. They add to Group Policy a centralized system for deploying preferences (that is, settings that users can change later). You can also use Group Policy preferences to configure applications that are not Group Policy-aware. By using Group Policy preferences, you can change or delete almost any registry setting, file or folder, shortcut, and more. You are not limited by the contents of Administrative Template files.
: http://technet.microsoft.com/en-us/library/dn581922.aspx
Q54. You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the File Server Resource Manager role service installed.
Server1 has a folder named Folder1 that is used by the sales department.
You need to ensure that an email notification is sent to the sales manager when a File Screening Audit report is generated.
What should you configure on Server1?
A. a file group
B. a file screen
C. a file screen exception
D. a storage report task
Answer: D
Explanation:
From the Storage Reports Management node, you can generate reports that will help you understand file use on the storage server. You can use the storage reports to monitor disk usage patterns (by file type or user), identify duplicate files and dormant files, track quota usage, and audit file screening.
Before you run a File Screen Audit report, in the File Server Resource Manager Options dialog box, on the File Screen Audit tab, verify that the Record file screening activity in the auditing database check box is selected.
Reference: http: //technet. microsoft. com/en-us/library/cc755988. aspx
http: //technet. microsoft. com/en-us/library/cc730822. aspx
http: //technet. microsoft. com/en-us/library/cc770594. aspx
http: //technet. microsoft. com/en-us/library/cc771212. aspx
http: //technet. microsoft. com/en-us/library/cc732074. aspx
Q55. Your network contains an Active Directory domain named contoso.com. The domain contains domain controllers that run Windows Server 2008, Windows Server 2008 R2 Windows Server 2012, and Windows Server 2012 R2.
A domain controller named DC1 runs Windows Server 2012 R2. DC1 is backed up daily.
During routine maintenance, you delete a group named Group1.
You need to recover Group1 and identify the names of the users who were members of Group1 prior to its deletion. You want to achieve this goal by using the minimum amount of administrative effort.
What should you do first?
A. Perform an authoritative restore of Group1.
B. Mount the most recent Active Directory backup.
C. Use the Recycle Bin to restore Group1.
D. Reactivate the tombstone of Group1.
Answer: A
Explanation:
The Active Directory Recycle Bin does not have the ability to track simple changes to objects. If the object itself is not deleted, no element is moved to the Recycle Bin for possible recovery in the future. In other words, there is no rollback capacity for changes to object properties, or, in other words, to the values of these properties. There is another approach you should be aware of. Tombstone reanimation (which has nothing to do with zombies) provides the only way to recover deleted objects without taking a DC offline, and it's the only way to recover a deleted object's identity information, such as its objectGUID and objectSid attributes. It neatly solves the problem of recreating a deleted user or group and having to fix up all the old access control list (ACL) references, which contain the objectSid of the deleted object. Restores domain controllers to a specific point in time, and marks objects in Active Directory as being authoritative with respect to their replication partners.
Q56. Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2.
On all of the domain controllers, Windows is installed in C:\Windows and the Active Directory database is located in D:\Windows\NTDS\.
All of the domain controllers have a third-party application installed.
The operating system fails to recognize that the application is compatible with domain controller cloning.
You verify with the application vendor that the application supports domain controller cloning.
You need to prepare a domain controller for cloning.
What should you do?
A. In D:\Windows\NTDS\, create an XML file named DCCloneConfig.xml and add the application information to the file.
B. In the root of a USB flash drive, add the application information to an XML file named DefaultDCCIoneAllowList.xml.
C. In D:\Windows\NTDS\, create an XML file named CustomDCCloneAllowList.xml and add the application information to the file.
D. In C:\Windows\System32\Sysprep\Actionfiles\, add the application information to an XML file named Respecialize.xml.
Answer: C
Explanation:
Place the CustomDCCloneAllowList.xml file in the same folder as the Active Directory database (ntds. dit) on the source Domain Controller.
References:
http: //blogs. dirteam. com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directory-domain-services-in-windows-server-2012-part-13-domain-controller-cloning. aspx
http: //www. thomasmaurer. ch/2012/08/windows-server-2012-hyper-v-how-to-clone-a-virtual-domain-controller
http: //technet. microsoft. com/en-us/library/hh831734. aspx
Q57. Your company deploys a new Active Directory forest named contoso.com. The first domain controller in the forest runs Windows Server 2012 R2. The forest contains a domain controller named DC10.
On DC10, the disk that contains the SYSVOL folder fails.
You replace the failed disk. You stop the Distributed File System (DFS) Replication service. You restore the SYSVOL folder.
You need to perform a non-authoritative synchronization of SYSVOL on DC10.
Which tool should you use before you start the DFS Replication service on DC10?
A. Dfsgui.msc
B. Dfsmgmt.msc
C. Adsiedit.msc
D. Ldp
Answer: C
Explanation:
How to perform a non-authoritative synchronization of DFSR-replicated SYSVOL (like "D2" for FRS)
. In the ADSIEDIT. MSC tool modify the following distinguished name (DN) value and attribute on each of the domain controllers that you want to make non-authoritative:
CN=SYSVOL Subscription,CN=Domain System Volume,CN=DFSR-LocalSettings,CN=<the server name>,OU=Domain Controllers,DC=<domain> msDFSR-Enabled=FALSE
. Force Active Directory replication throughout the domain.
. Run the following command from an elevated command prompt on the same servers that you set as non-authoritative:
DFSRDIAG POLLAD
. You will see Event ID 4114 in the DFSR event log indicating SYSVOL is no longer being replicated.
. On the same DN from Step 1, set:
msDFSR-Enabled=TRUE
. Force Active Directory replication throughout the domain.
. Run the following command from an elevated command prompt on the same servers that you set as non-authoritative:
DFSRDIAG POLLAD
. You will see Event ID 4614 and 4604 in the DFSR event log indicating SYSVOL has been initialized. That domain controller has now done a “D2” of SYSVOL.
Note: Active Directory Service Interfaces Editor (ADSI Edit) is a Lightweight Directory Access Protocol (LDAP) editor that you can use to manage objects and attributes in Active Directory. ADSI Edit (adsiedit. msc) provides a view of every object and attribute in an Active Directory forest. You can use ADSI Edit to query, view, and edit attributes that are not exposed through other Active Directory Microsoft Management Console (MMC) snap-ins: Active Directory Users and Computers, Active Directory Sites and Services, Active Directory Domains and Trusts, and Active Directory Schema.
Q58. Your network contains a Hyper-V host named Server1 that hosts 20 virtual machines.
You need to view the amount of memory resources and processor resources each virtual machine uses currently.
Which tool should you use on Server1?
A. Hyper-V Manager
B. Task Manager
C. Windows System Resource Manager (WSRM)
D. Resource Monitor
Answer: A
Q59. HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that has the Network Policy Server server role installed. The domain contains a server named Server2 that is configured for RADIUS accounting.
Server1 is configured as a VPN server and is configured to forward authentication requests to Server2.
You need to ensure that only Server2 contains event information about authentication requests from connections to Server1.
Which two nodes should you configure from the Network Policy Server console?
To answer, select the appropriate two nodes in the answer area.
Answer:
Q60. Your network contains two servers named Server1 and Server2. Both servers run Windows Server 2012 R2 and have the DNS Server server role installed. Server1 hosts a primary zone for contoso.com. Server2 hosts a secondary zone for contoso.com. The zone is not configured to notify secondary servers of changes automatically.
You update several records on Server1.
You need to force the replication of the contoso.com zone records from Server1 to Server2.
What should you do from Server2?
A. Right-click the contoso.com zone and click Reload.
B. Right-click the contoso.com zone and click Transfer from Master.
C. Right-click Server2 and click Update Server Data Files.
D. Right-click Server2 and click Refresh.
Answer: B
Explanation:
Initiates zone transfer from secondary server Open DNS; In the console tree, right-click the applicable zone and click Transfer from master.
References: http: //technet. microsoft. com/en-us/library/cc779391%28v=ws. 10%29. aspx
http: //technet. microsoft. com/en-us/library/cc779391%28v=ws. 10%29. aspx
http: //technet. microsoft. com/en-us/library/cc786985(v=ws. 10). aspx
http: //technet. microsoft. com/en-us/library/cc779391(v=ws. 10). aspx