getcertified4sure.com

Cisco 210-060 Exam Dumps 2021




Master the 210 060 cicd content and be ready for exam day success quickly with this cisco 210 060. We guarantee it!We make it a reality and give you real 210 060 vce in our Cisco 210-060 braindumps. Latest 100% VALID 210 060 dumps at below page. You can use our Cisco 210-060 braindumps and pass your exam.

Free 210-060 Demo Online For Microsoft Certifitcation:

NEW QUESTION 1
How are calls routed in an MGCP call agent?

  • A. by route patterns on Cisco Unified Communications Manager
  • B. by dial peers on the gateway
  • C. by static routes on the gateway
  • D. by a translation pattern on Cisco Unified Communications Manager

Answer: A

NEW QUESTION 2
How to initiate a cisco Telepresence 1310-65 camera calibration?

  • A. Troubleshoot>Hardware setup>setup>show focus target
  • B. Troubleshoot>Hardware setup>camera>show camera target
  • C. Harware setup>start>camera>setup>show focus target
  • D. Troubleshoot>Hardware setup>camera>setup>calibrate

Answer: B

NEW QUESTION 3
Which two actions take place for proper operation when using Advanced Networking on VCS (choose two)?

  • A. automatic routing must be enabled
  • B. manual route must be added using x command route add
  • C. network interface must reside in the same subnet
  • D. NAT reflection must be enabled on the firewall
  • E. Network interface must reside in separate subnet

Answer: BE

NEW QUESTION 4
CUC 10.X supports LDAP integration with several widely used LDAP directories systems, including the following:

  • A. Microsoft Active Directory 2000, 2003 and 2008 (support for AD 2012 only in CUCM 10.x and later
  • B. Microsoft Active Directory Application Mode 2003
  • C. Microsoft Lightweight Directory Services 2008
  • D. iPlanet Directory Server 5.1
  • E. Sun ONE Directory Server (5.2, 6.x)
  • F. Open LDAP (2.3.39, 2.4)

Answer: A

NEW QUESTION 5
A user reports that several IP phones in a single department are displaying a continuous "registering" message. Which fault domain should be investigated?

  • A. network router
  • B. Cisco Unified Communications Manager subscriber node
  • C. network switch
  • D. IP phones
  • E. SIP gateway

Answer: C

NEW QUESTION 6
Which two directory services are supported by Cisco Unified Communications Manager for Lightweight Directory Access Protocol integration? (Choose two.)

  • A. Windows Active Directory 2008
  • B. Novell eDirectory
  • C. iPlanet Directory Server 4.0
  • D. Sun ONE Directory Server
  • E. Open Lightweight Directory Access Protocol 2.1

Answer: AD

NEW QUESTION 7
An administrator group is looking to on-board multiple users with Cisco Unified Communications Manager at one time. Which option should be used?

  • A. Bulk Administration Tool
  • B. Product Upgrade Tool
  • C. Command Lookup Tool
  • D. Cisco Unified Communications Manager User Options Page
  • E. Cisco Upload Tool

Answer: A

NEW QUESTION 8
An IT administrator is having issues with registering an 7900 series IP phone The admin cannot review phone settings because they are locked Which sequence allows the administrator to unlock the settings?

  • A. **#
  • B. *#
  • C. *#*
  • D. #**

Answer: D

NEW QUESTION 9
IP WAN failure has occurred. Which two configurations must be made to allow calls to or from an IP phone at a branch location to complete to a destination outside of that branch? (Choose two.)

  • A. Survivable Remote Site Telephony is configured on the branch router.
  • B. LAN failover configuration is set to Survivable Remote Site Telephony.
  • C. Call Forward UnRegistered option is configured on each branch phone profile.
  • D. POTS WAN failover is set to Survivable Remote Site Telephony.
  • E. An ISDN is configured as a primary survivable backup site

Answer: CE

Explanation: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab10/collab10/models.html

NEW QUESTION 10
An administrator wants to gauge the load and performance capacity of Cisco Unified Communication Manager devices, including conference bridges, gateways, and trunks. Which report would the administrator run?

  • A. CAR
  • B. CDR
  • C. SIP
  • D. RTMT
  • E. CUBE

Answer: A

NEW QUESTION 11
An engineer is creating a new phone using the Call Manager. Which option is presented first when you click the Add New button?

  • A. Phone Type
  • B. BAT Phone Template
  • C. MAC Address
  • D. Common Phone Profile

Answer: A

NEW QUESTION 12
An end user is unable to sign into Jabber. Assuming that network connectivity has been verified, which three settings for the end user should be checked? (Choose three.)

  • A. Jabber Advanced Settings
  • B. Cisco Unified Communications Manager Service Profile
  • C. Cisco Unified Communications Manager User Management
  • D. Cisco Unified Presence Server Advanced Settings
  • E. Cisco Unified Presence Server Application Listener
  • F. Cisco Unified Presence Server System Topology
  • G. Jabber Version

Answer: ABC

NEW QUESTION 13
An engineer is configuring the Cisco Unified Communications Manager disaster recovery system. Which two statements about the disaster recovery system are true? (Choose two.)

  • A. It requires the use of schedules for backups.
  • B. Backup files are encrypted using the cluster security password.
  • C. If the backup device is listed in a backup schedule, it cannot be manually deleted.
  • D. If the backup does not complete within 40 hours, the backup times out.
  • E. Archiving backups to tape drives is supported.

Answer: BC

NEW QUESTION 14
Which two standard supported for streaming live video on cisco telepresence content server (choose two)?

  • A. H265
  • B. H263
  • C. H270
  • D. H261
  • E. H262

Answer: BD

NEW QUESTION 15
For capacity planning purposes, a network administrator must provide a report to management that displays the number of phones registered per server. Where can the administrator obtain this information?

  • A. Navigate to Cisco Unified Serviceability > Tools > Serviceability Reports Archive.
  • B. Navigate to Cisco Unified Operating System Administration > Tools > System Reports.
  • C. Navigate to Cisco Unified CM Administration > Tools > System Reports.
  • D. Navigate to Cisco Unified Reporting > Tools > System Reports.

Answer: A

NEW QUESTION 16
An engineer is using the address https //<ipaddressofpublisherWucmuser. Which two phone settings can the engineer access from this address? (Choose two.)

  • A. external phone mask
  • B. route partition
  • C. ring settings
  • D. calling search space
  • E. call forwarding

Answer: D

NEW QUESTION 17
An administrator is setting up a remote site in Cisco Unified Communications Manager that has a T1 WAN connection to the main site. Which option is the best VoIP codec for this task?

  • A. G.711
  • B. G.729
  • C. G.712
  • D. G.723

Answer: B

NEW QUESTION 18
Which three choices are required for the boot process for a Cisco IP phone? (Choose three.)

  • A. TFTP services
  • B. DHCP services
  • C. Voice VLAN
  • D. Routing protocol
  • E. TCP/IP
  • F. PortFast

Answer: ABC

100% Valid and Newest Version 210-060 Questions & Answers shared by Surepassexam, Get Full Dumps HERE: https://www.surepassexam.com/210-060-exam-dumps.html (New 305 Q&As)