300-101 Exam
[Regenerate] ccnp routing and switching route 300 101 official cert guide
Our pass rate is high to 98.9% and the similarity percentage between our ccnp route 300 101 study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Cisco ccnp routing and switching route 300 101 complete video course exam in just one try? I am currently studying for the Cisco ccnp route 300 101 dumps exam. Latest Cisco ccnp route 300 101 dumps Test exam practice questions and answers, Try Cisco examcollection 300 101 Brain Dumps First.
P.S. Breathing 300-101 preparation labs are available on Google Drive, GET MORE: https://drive.google.com/open?id=1lWZpAR5vb8lOApmzhHWMzXffOPhCR-LL
New Cisco 300-101 Exam Dumps Collection (Question 2 - Question 11)
Question No: 2
An engineer is using a network sniffer to troubleshoot DHCPv6 between a router and hosts on the LAN with the following configuration:
Interface Ethernet0
Ipv6 dhcp server DHCPSERVERPOOL rapid-commit
!
Which two DHCPv6 messages will appear in the sniffer logs?
A. reply
B. request
C. advertise
D. acknowledge
E. solicit
F. accept
Answer: A,E
Question No: 3
Which statement about dual stack is true?
A. Dual stack translates IPv6 addresses to IPv4 addresses.
B. Dual stack means that devices are able to run IPv4 and IPv6 in parallel.
C. Dual stack translates IPv4 addresses to IPv6 addresses.
D. Dual stack changes the IP addresses on hosts from IPv4 to IPv6 automatically.
Answer: B
Question No: 4
How should a router that is being used in a Frame Relay network be configured to keep split horizon issues from preventing routing updates?
A. Configure a separate subinterface for each PVC with a unique DLCI and subnet assigned to the
subinterface.
B. Configure each Frame Relay circuit as a point-to-point line to support multicast and broadcast traffic.
C. Configure many subinterfaces in the same subnet.
D. Configure a single subinterface to establish multiple PVC connections to multiple remote router interfaces.
Answer: A
Explanation: EXPLANATION
If you have a serial port configured with multiple DLCIs connected to multiple remote sites, split horizon rules, stop route updates received on an interface from being sent out the same interface. By creating subinterfaces for each PVC, you can avoid the split horizon issues when using Frame Relay. http://www.indiabix.com/networking/wide-area- networks/015004
Question No: 5
In which two ways can split horizon issues be overcome in a Frame Relay network environment? (choose two.)
A. Configuring one physical serial interface with Frame Relay to various remote sites.
B. Configure a loopback interface with Frame Relay to various remote sites.
C. Configuring multiple subinterfaces on a single physical interface to various remote sites.
D. Enabling split horizon.
E. Disabling split horizon
Answer: C,E
Question No: 6
Refer to the exhibit.
Which option prevents routing updates from being sent to the DHCP router, while still allowing routing update messages to flow to the Internet router and the distribution switches?
A. DHCP(config-router)# passive-interface default DHCP(config-router)# no passive- interface Gi1/0 Internet(config-router)# passive-interface Gi0/1 Internet (config-router)# passive-interface Gi0/2
B. Core(config-router)# passive-interface Gi0/0 Core(config-router)# passive-interface Gi3/1 Core(config-router)# passive-interface Gi3/2 DHCP(config-router)# no passive- interface Gi1/0
C. Core(config-router)# passive-interface default Core(config-router)# no passive-interface Gi0/0 Core(config-router)# no passive-interface Gi3/1 Core(config-router)# no passive- interface Gi3/2
D. Internet(config-router)# passive-interface default Core(config-router)# passive-interface default DSW1(config-router)# passive-interface default DSW2(config-router)# passive- interface default
Answer: C
Question No: 7
Refer to Exhibit:
Which three NTP features can be deduced on the router? (choose three)
A. only accepts time requests from 192.168.1.1
B. only handle four requests at a time
C. only is in stratum 4
D. only updates its time from 192.168.1.1
E. only accepts time requests from 192.168.1.4
F. only updates its time from 192.168.1.4
Answer: A,C,F
Question No: 8
Which statement is true concerning 6to4 tunneling?
A. IPv4 traffic is encapsulated with an IPv6 header.
B. The edge routers can use any locally configured IPv6 address.
C. Hosts and routers inside a 6to4 site will need a special code.
D. An edge router must use IPv6 address of 2002::/16 in its prefix.
Answer: D
Explanation:
6to4 tunnels use IPv6 addresses that concatenate 2002::/16 with the 32-bit IPv4 address of the edge router, creating a 48-bit prefix.
Question No: 9
Refer to exhibit:
Why is the default route not removed when 172.20.20.2 stops replying to ICMP echos?
A. The source-interface is configured incorrectly.
B. the threshold value is wrong
C. The destination must be 172.30.30.2 for icmp-echo.
D. The default route is missing the track feature.
Answer: D
Question No: 10
Refer to the exhibit. Which statement is true?
A. Traffic from the 172.16.0.0/16 network will be blocked by the ACL.
B. The 10.0.0.0/8 network will not be advertised by Router B because the network statement for the 10.0.0.0/8 network is missing from Router B.
C. The 10.0.0.0/8 network will not be in the routing table on Router B.
D. Users on the 10.0.0.0/8 network can successfully ping users on the 192.168.5.0/24 network, but users on the 192.168.5.0/24 cannot successfully ping users on the 10.0.0.0/8 network.
E. Router B will not advertise the 10.0.0.0/8 network because it is blocked by the ACL.
Answer: E
Question No: 11
A network engineer applies the command ip tcp adjust-mss <bytes> under interface configuration mode. What is the result?
A. The probability of SYN packet truncation is increased.
B. The UDP session is inversely affected.
C. The probability of dropped or segmented TCP packets is decreased.
D. The optimum MTU value for the interface is set.
Answer: C
100% Refresh Cisco 300-101 Questions & Answers shared by 2passeasy, Get HERE: https://www.2passeasy.com/dumps/300-101/ (New 487 Q&As)