70-417 Exam
What tells you about 70 417 dumps
Our pass rate is high to 98.9% and the similarity percentage between our 70 417 pdf study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Microsoft microsoft 70 417 exam in just one try? I am currently studying for the Microsoft 70 417 pdf exam. Latest Microsoft microsoft 70 417 Test exam practice questions and answers, Try Microsoft exam 70 417 Brain Dumps First.
Q101. You have a server named Server1 that runs Windows Server 2012 R2. You create a custom Data Collector Set (DCS) named DCS1.
You need to configure DCS1 to meet the following requirements:
. Automatically run a program when the amount of total free disk space on Server1 drops below 10 percent of capacity. . Log the current values of several registry settings.
Which two should you configure in DCS1? (Each correct answer presents part of the solution. Choose two.)
A. Event trace data
B. A Performance Counter Alert
C. System configuration information
D. A performance counter
Answer: B,C
Explanation:
Automatically run a program when the amount of total free disk space on Server1 drops
below 10 percent of capacity.
You can also configure alerts to start applications and performance logs
Log the current values of several registry settings.
System configuration information allows you to record the state of, and changes to, registry
keys.
Total free disk space
Registry settings
Run a program on alert http: //technet. microsoft. com/en-us/library/cc766404. aspx
Q102. Your network contains three servers named HV1, HV2, and Server1 that run Windows Server 2012 R2. HV1 and HV2 have the Hyper-V server role installed. Server1 is a file server that contains 3 TB of free disk space.
HV1 hosts a virtual machine named VM1. The virtual machine configuration file for VM1 is stored in D:\VM and the virtual hard disk file is stored in E:\VHD.
You plan to replace drive E with a larger volume.
You need to ensure that VM1 remains available from HV1 while drive E is being replaced. You want to achieve this goal by using the minimum amount of administrative effort.
What should you do?
A. Perform a live migration to HV2.
B. Add HV1 and HV2 as nodes in a failover cluster. Perform a storage migration to HV2.
C. Add HV1 and HV2 as nodes in a failover cluster. Perform a live migration to HV2.
D. Perform a storage migration to Server1.
Answer: D
Q103. Your network contains an Active Directory domain named contoso.com. The network contains a server named Server1 that runs Windows Server 2012 R2 and a server named Server2 that runs Windows Server 2008 R2 Service Pack 1 (SP1). Server1 and Server2 are member servers. You need to ensure that you can manage Server2 from Server1 by using Server Manager. Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Install Windows Management Framework 3.0 on Server2.
B. Install Remote Server Administration Tools on Server1.
C. Install the Windows PowerShell 2.0 engine on Server1.
D. Install Microsoft .NET Framework 4 on Server2.
E. Install Remote Server Administration Tools on Server2.
Answer: A,D
Explanation:
http://technet.microsoft.com/en-us/library/hh831456.aspx#BKMK_softconfig
Q104. Your network contains an Active Directory domain named contoso.com. The Active
Directory Recycle bin is enabled for contoso.com.
A support technician accidentally deletes a user account named User1.
You need to restore the User1 account.
Which tool should you use?
A. Ldp
B. Esentutl
C. Active Directory Administrative Center
D. Ntdsutil
Answer: C
Explanation:
http://technet.microsoft.com/nl-nl/library/dd379509(v=ws.10).aspx#BKMK_2 http://technet.microsoft.com/en-us/magazine/2007.09.tombstones.aspx http://technet.microsoft.com/en-us/library/hh875546.aspx http://technet.microsoft.com/en-us/library/dd560651(v=ws.10).aspx
Q105. You have a server named Server1 that runs a Server Core installation of Windows Server 2012 R2 Standard. You establish a Remote Desktop session to Server1.
You need to identify which task can be performed on Server1 from within the Remote Desktop session.
What should you identify?
A. Install a feature by using Server Manager.
B. Modify the network settings by using Sconfig.
C. Disable services by using Msconfig.
D. Join a domain by using the System Properties.
Answer: B
Explanation: In Windows Server 2012 R2, you can use the Server Configuration tool (Sconfig.cmd) to configure and manage several common aspects of Server Core installations. You must be a member of the Administrators group to use the tool. Sconfig.cmd is available in the Minimal Server Interface and in Server with a GUI mode.
http://technet.microsoft.com/en-us/library/jj647766.aspx Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 2: Deploying servers, p. 80
Q106. Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2.
Server1 and Server2 have the Failover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1.
Cluster1 hosts an application named App1.
You need to ensure that Server2 handles all of the client requests to the cluster for App1. The solution must ensure that if Server2 fails, Server1 becomes the active node for App1.
What should you configure?
A. Affinity - None
B. Affinity - Single
C. The cluster quorum settings
D. The failover settings
E. A file server for general u
F. The Handling priority
G. The host priority
H. Live migration
I. The possible owner
J. The preferred owner
K. Quick migration
L. The Scale-Out File Server
Answer: J
Explanation:
The preferred owner in a 2 server cluster will always be the active node unless it is down. http:// www.sqlservercentral.com/Forums/Topic1174454-146-1.aspx#bm1174835 Difference between possible owners and preferred owners Possible owners are defined at the resource level and dictate which nodes in the Windows cluster are able to service this resource For instance, you have a 3 node cluster with Node A, Node B and Node C. You have a clustered disk resource "MyClusteredDisk", if you remove Node C from the possible owners of the clustered disk resource "MyClusteredDisk" then this disk will never be failed over to Node C. Preferred owners are defined at the resource group level and define the preferred node ownership within the Windows cluster For instance, you have a 3 node cluster with Node A, Node B and Node C. You have a cluster resource group "MyClusteredGroup" which contains various disk, IP, network name and service resources. Nodes A, B and C are all possible owners but Node B is set as the preferred owner and is currently the active node. The resource group fails over to Node C as Node B stops responding on the Public network due to a failed NIC. In the Resource group properties on the failback tab you have this set to immediate. You fix the NIC issue on Node B and bring it back up on the network. The resource group currently active on Node C will without warning immediately attempt to failback to Node B. Not a good idea if this is a Production SQL Server instance, so use caution when configuring preferred owners and failback http://support.microsoft.com/kb/299631/en-us Failover behavior on clusters of three or more nodes This article documents the logic by which groups fail from one node to another when there are 3 or more cluster node members. The movement of a group can be caused by an administrator who manually moves a group or by a node or resource failure. Where the group moves depends on how the move is initiated and whether the Preferred Owner list is set.
Q107. You plan to deploy a file server to a temporary location.
The temporary location experiences intermittent power failures.
The file server will contain a dedicated volume for shared folders.
You need to create a volume for the shared folders. The solution must minimize the
likelihood of file corruption if a power failure occurs.
Which file system should you use?
A. NFS
B. FAT32
C. ReFS
D. NTFS
Answer: C
Explanation: The ReFS file system allows for resiliency against corruptions with the option to salvage amongst many other key features like Metadata integrity with checksums, Integrity streams with optional user data integrity, and shared storage pools across machines for additional failure tolerance and load balancing, etc.
Q108. OTSPOT
Your network contains a RADIUS server named Admin1.
You install a new server named Server2 that runs Windows Server 2012 R2 and has
Network Policy Server (NPS) installed.
You need to ensure that all accounting requests for Server2 are forwarded to Admin1.
On Server2, you create a new remote RADIUS server group named Group1 that contains
Admin1.
What should you configure next on Server2?
To answer, select the appropriate node in the answer area.
Answer:
352. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. The domain contains a virtual machine named VM1.
A developer wants to attach a debugger to VM1.
You need to ensure that the developer can connect to VM1 by using a named pipe.
Which virtual machine setting should you configure?
A. BIOS
B. Network Adapter
C. COM 1
D. Processor
Answer: C
Explanation:
Named pipes can be used to connect to a virtual machine by configuring COM 1.
References: http://support.microsoft.com/kb/819036 http://support.microsoft.com/kb/141709
Q109. OTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains an enterprise certification authority (CA).
The domain contains a server named Server1 that runs Windows Server 2012 R2. You install the Active Directory Federation Services server role on Server1.
You plan to configure Server1 as an Active Directory Federation Services (AD FS) server. The Federation
Service name will be set to adfs1.contoso.com.
You need to identify which type of certificate template you must use to request a certificate for AD FS.
Which certificate template should you identify? To answer, select the appropriate template in the
answer area.
Answer:
Q110. A user has locked his account (again!) and you need to unlock it so they can continue working normally.
Which of the following is a possible way to unlock a User Account? (Choose three)
A. Command Line
B. None of these
C. Windows PowerShell
D. VBScript
Answer: A,C,D
Explanation:
All 3 of these can be used to unlock accounts.