70-417 Exam
Amazing mcp 70-417 secrets
To be honest, you merely master the theoretical expertise without practical expertise is not enough at all. Using our Microsoft Microsoft online training training course, the important contents in the Microsoft certification exam will likely be within your own grasp firmly. Your Microsoft Microsoft exam practice questions will strengthen your own knowledge, construct your confidence and also boost your own proficiency.
2021 Dec exam 70-417:
Q171. Your network contains an Active Directory domain named contoso.com. The domain contains more than 100 Group Policy objects (GPOs).
Currently, there are no enforced GPOs. The domain contains a top-level organizational unit (OU) for each department. A group named Group1 contains members from each department.
You have a GPO named GPO1 that is linked to the domain.
You need to configure GPO1 to Apply settings to Group1 only.
What should you use?
A. Dcgpofix
B. Get-GPOReport
C. Gpfixup
D. Gpresult
E. Gptedit.msc
F. Import-GPO
G. Restore-GPO
H. Set-GPInheritance
I. Set-GPLink
J. Set-GPPermission
K. Gpupdate
L. Add-ADGroupMember
Answer: J
Explanation:
http://technet.microsoft.com/en-us/library/ee461038.aspx
Q172. Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the Hyper-V server role installed.Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
You need to ensure that VM1 can use more CPU time than the other virtual machines when the CPUs on Server1 are under a heavy load.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney s
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Answer: B
Explanation:
B. Resource controls provide you with several ways to control the way that Hyper-V
allocates resources to virtual machine. Resource control in used in the event where you need to adjust the computing resources of a virtual machine, you can reconfigure the resources to meet the changing needs. You can also specify resource controls to automate how resources are allocated to virtual machines.
References: http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx http://technet.microsoft.com/en-us/library/hh831410.aspx http://technet.microsoft.com/en-us/library/cc742470.aspx Exam Ref 70-410, Installing and Configuring Windows Server 2012, Chapter 3: Configure Hyper-V, Objective 3.1: Create and Configure virtual machine settings, p. 144 Training Guide: Installing and Configuring Windows Server 2012: Chapter 7: Hyper-V Virtualization, Lesson 2: Deploying and configuring virtual machines, p. 335
Q173. Your manager has asked you to create various user objects using Windows PowerShell. Which of the following must you do to accomplish this?
A. Use the Create-User createUsert
B. Use the objUser = new OUUser statement
C. Use the AddUser method of ADSL
D. Invoke the Create method of OU
Answer: D
Explanation:
http://www.mysmallcorneroftheweb.co.uk/programming-softwaredevelopement/powershellcreatingconfiguring-a-active-directory-user The user is created by first defining the OU and then invoking the ou Create method.
Q174. You have a server named Server1 that runs Windows Server 2012 R2. Server1 has following storage spaces:
Data
Users
Backups
Primordial
....
You add an additional hard disk to Server1.
You need to identify which storage space contains the new hard disk.
Which storage space contains the new disk?
A. Primordial
B. Data
C. Backups
D. Users
Answer: A
Explanation:
New Disks (Unallocated space) added to Primordial spacePrimordial Pool? All storage that meets acceptable criteria for Storage Spaces will be placed in the Primordial Pool. Thiscan be considered the default pool for devices from which any other pools will be created. Notice that there are no other virtual disks or pools at this point. The Primordial Pool will only consist of physical storage devices that do not belong to any other pools.
http://blogs.technet.com/b/canitpro/archive/2012/12/13/storage-pools-dive-right-in.aspx http:// blogs.technet.com/b/askpfeplat/archive/2012/10/10/windows-server-2012-storagespaces-is- it for-youcould-be.aspx
Q175. Your network contains an Active Directory forest named contoso.com. All servers run Windows Server 2012 R2.
You need to create a custom Active Directory application partition.
Which tool should you use?
A. Eseutil
B. Dsadd
C. Dsmod
D. Ntdsutil
Answer: D
Explanation:
*
To create or delete an application directory partition Open Command Prompt. Type:ntdsutil At the ntdsutil command prompt, type:domain management At the domain management command prompt, type:connection At the server connections command prompt, type:connect to server ServerName At the server connections command prompt, type:quit At the domain management command prompt, do one of the following:
*
partition management Manages directory partitions for Active Directory Domain Services (AD DS) or Active Directory Lightweight Directory Services (AD LDS). This is a subcommand of Ntdsutil and Dsmgmt. Ntdsutil and Dsmgmt are command-line tools that are built into Windows Server 2008 and Windows Server 2008 R2. / partition management create nc %s1 %s2 Creates the application directory partition with distinguished name %s1, on the Active Directory domain controller or AD LDS instance with full DNS name %s2. If you specify "NULL" for %s2, this command uses the currently connected Active Directory domain controller. Use this command only with AD DS. For AD LDS, use createnc %s1 %s2 %s3.
Note:
*
An application directory partition is a directory partition that is replicated only to specific domain controllers. A domain controller that participates in the replication of a particular
.......
application directory partition hosts a replica of that partition.
Latest prerequisite for exam 70-417:
Q176. Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Both servers have the Hyper-V server role installed.
You plan to replicate virtual machines between Server1 and Server2. The replication will be encrypted by using Secure Sockets Layer (SSL).
You need to request a certificate on Server1 to ensure that the virtual machine replication is encrypted.
Which two intended purposes should the certificate for Server1 contain? (Each correct answer presents part of the solution. Choose two.)
A. Client Authentication
B. Kernel Mode Code Signing
C. Server Authentication
D. IP Security end system
E. KDC Authentication
Answer: A,C
Explanation:
http://blogs.technet.com/b/virtualization/archive/2012/03/13/hyper-v-replica-certificaterequirements.aspx
Q177. Your network contains an active directory domain named Contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.
You create a group Managed Service Account named gservice1.
You need to configure a service named service1 to run as the gservice1 account.
How should you configure service1?
A. From Services Console configure the recovery settings
B. From a command prompt ,run sc.exe and specify the config parameter
C. From Windows PowerShell,run Set-Service and specify the -PassThrough parameter
D. From a command prompt ,run sc.exe and specify the sdset parameter
Answer: B
Explanation:
Executing the sc.exe command with the config parameter will modify service configuration.
Q178. OTSPOT
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. All domain controllers run Windows Server 2012 R2 and are configured as DNS servers. All DNS zones are Active Directory-integrated. Active Directory Recycle Bin is enabled.
You need to modify the amount of time deleted objects are retained in the Active Directory Recycle Bin.
Which naming context should you use?
To answer, select the appropriate naming context in the answer area.
Answer:
Q179. Your company deploys a new Active Directory forest named contoso.com. The first domain controller in the forest runs Windows Server 2012 R2. The forest contains a domain controller named DC10.
On DC10, the disk that contains the SYSVOL folder fails.
You replace the failed disk. You stop the Distributed File System (DFS) Replication service. You restore the SYSVOL folder.
You need to perform a non-authoritative synchronization of SYSVOL on DC10.
Which tool should you use before you start the DFS Replication service on DC10?
A. Dfsgui.msc
B. Ultrasound
C. Ldp
D. Replmon
Answer: B
Explanation: Verify that replication is working as designed. Download the Ultrasound Monitoring and Troubleshooting Tool for File Replication Services from the Microsoft Download Center to verify the healgt of the current FRS environment.
Q180. RAG DROP
You have a Hyper-V host named Server1.
Server1 hosts a virtual machine named VM1.
You view the properties of VM1 as shown in the following exhibit. (Click the Exhibit button.)
You need to configure bandwidth management for VM1.
Which three actions should you perform in sequence? (To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.)
Answer: