Question No: 3

Two routers are connected on a PPP link using CHAP authentication by default which value will

the routers use as t identification on the link?

A. Their host names

B. Their IP address on the connected link

C. Their interface numbers

D. Their serial numbers

Question No: 4

What is one requirement to support the IGMP proxy feature?

A. Devices on the unidirectional link must be in the same IP subnet.

B. Devices connected to a unidirectional link must disable Internet access.

C. IGMP snooping must be disabled.

D. PIM-DM must be enabled on all unidirectional links.

Question No: 5

Which authentication types does OSPF support?

A. Null (or no authentication), clear text and MD5.

B. Clear text only

C. MD5only

D. MD5 and clear text

E. Null( or no authentication) and clear text

Question No: 6

Which command can you enter to prevent a router from displaying Telnet connection messages on the terminal?

A. service telnet-zeroldle

B. ip telnet hidden hostname

C. ip telnet hidden address

D. no ip domain-lookup

E. ip telnet quiet

Question No: 7

Which technology can be used to secure the edge of an STP domain?

A. root guard

B. BPDU guard

C. UplinkFast

D. BPDU filter

Question No: 8

Ping and Traceroute extended options are very useful. What is the difference between using the Record option with the ping command vs. the traceroute command?

A. The record option is not supported with the ping command

B. The record option is not supported with the traceroute command

C. When leveraged with the ping command, the Record option of this command not only informs you of the hops that the echo request (ping) went through to get the destination, but is also informs you of the hops it visited on the return path

D. When leveraged with the traceroute command, the Record option of this command not only informs you of the hops that the echo request (ping) went through to get the destination, but is also informs you of the hops it visited on the return path

Question No: 9

Refer to the Exhibit.

Which technology can allow Site A and Site B to run OSPF between sites ?

A. Point-to point circuit.

B. BGP

C. GRE Tunnel

D. Cisco MPLS TE

Question No: 10

When you implement CoPP on your network, what is its default action?

A. Drop management ingress traffic to the control plane.

B. Monitor ingress and egress traffic to the control plane by using access groups that are applied to the interface

C. Block all traffi

D. Rate-limit bidirectional traffic to the control plane.

E. Permit all traffi

Question No: 11

Which two statements about MSDP are true? (Choose two)

A. It is supported both for IPV4 and IPV6 multicast deployments

B. It is encapsulated into UDP segments

C. It is encapsulated into PIM packets

D. It interconnects into PIM-SM domains

E. MSDP peers are established using multiprotocol BGP

F. MPLS is required to establish MSDP peering

Question No: 12

Which IGMP snooping feature tracks IGMPv3 hosts on a per-port basis?

A. IGMPv3 querier

B. IGMPv3 static-group

C. fast-leave

D. explicit tracking

E. membership report