100-105 Exam
Secrets to ccent ccna icnd1 100 105
Cause all that matters here is passing the Cisco icnd1 100 105 exam. Cause all that you need is a high score of ccna 100 105 pdf ICND1 Cisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0) exam. The only one thing you need to do is downloading Certleader ccna 100 105 pdf exam study guides now. We will not let you down with our money-back guarantee.
P.S. Downloadable 100-105 faq are available on Google Drive, GET MORE: https://drive.google.com/open?id=16T0cVE2WYz-0Y7Wh56_Fr0zWNJ4X7B2X
New Cisco 100-105 Exam Dumps Collection (Question 4 - Question 13)
New Questions 4
CORRECT TEXTHow do you bypass password on cisco device?
Answer:
Change the configuration register to 0x2142. With this setting when that router reboots, it bypasses the startup-config and no password is required.
New Questions 5
Scenario:
You are a junior network engineer for a financial company, and the main office network is experiencing network issues. Troubleshoot the network issues.
Router R1 connects the main office to the internet, and routers R2 and R3 are internal routers.
NAT is enabled on router R1.
The routing protocol that is enabled between routers R1, R2 and R3 is RIPv2.
R1 sends the default route into RIPv2 for the internal routers to forward internet traffic to R1.
You have console access on R1, R2 and R3 devices. Use only show commands to troubleshoot the issues.
Why applications that are installed on PC's in R2 LAN network 10.100.20.0/24 are unable to communicate with server1?
A. A standard ACL statement that is configured on R1 is blocking the traffic sourced from Server1 network.
B. A standard ACL statement that is configured on R2 is blocking the traffic sourced from Setver1 network.
C. A standard ACL statement that is configured on R2 is blocking the traffic sourced from R2 LAN network.
D. A standard ACL statement that is configured on R1 is blocking the traffic sourced from R2 LAM network
Answer: B
Explanation:
Check the below now:
New Questions 6
Which component of the routing table ranks routing protocols according to their preferences?
A. administrative distance
B. next hop
C. metric
D. routing protocol code
Answer: A
Explanation:
Administrative distance - This is the measure of trustworthiness of the source of the route. If a router learns about a destination from more than one routing protocol, administrative distance is compared and the preference is given to the routes with lower
administrative distance. In other words, it is the believability of the source of the route.
New Questions 7
Which statement about the default switch configuration for remote access managements is true?
A. The system name is set to Cisco.
B. The Telnet password is set to cisco.
C. No default gateway is defined.
D. One IP address is preconfigured.
Answer: C
New Questions 8
Based on the network shown in the graphic
Which option contains both the potential networking problem and the protocol or setting that should be used to prevent the problem?
A. routing loops, hold down timers
B. Switching loops, split horizon
C. routing loops, split horizon
D. Switching loops, VTP
E. routing loops, STP
F. Switching loops, STP
Answer: F
New Questions 9
Refer to the exhibit.
Pierre has just installed the mail server and Switch2. For security reasons UDP packets are not permitted outbound on the Fa0/1 router interface. Pierre is now at his workstation testing the new installation and is not able to establish SMTP communication to the mail server.
What is the most likely cause for lack of communication between Pierreu2021s workstation and the mail server?
A. The crossover cable should be a straight-through cable.
B. UDP is blocked coming out of the Fa0/1 interface on the router.
C. The server should be directly connected to the router.
D. The IP addresses are all on the same network. No router is required.
Answer: A
New Questions 10
Which Layer 1 devices can be used to enlarge the area covered by a single LAN segment? (Choose two.)
A. switch
B. router
C. NIC
D. hub
E. repeater
F. RJ-45 transceiver
Answer: D,E
New Questions 11
Which route source code represents the routing protocol with a default administrative distance of 90 in the routing table?
A. S
B. E
C. D
D. R
E. O
Answer: C
Explanation:
SStatic EEGP DEIGRP RRIP OOSPF
Default Administrative distance of EIGRP protocol is 90 then answer is C
Default Distance Value TableThis table lists the administrative distance default values of the protocols that Cisco supports:
Route Source
Default Distance Values
Connected interface 0
Static route 1
Enhanced Interior Gateway Routing Protocol (EIGRP) summary route
5
External Border Gateway Protocol (BGP) 20
Internal EIGRP 90
IGRP 100 OSPF 110
Intermediate System-to-Intermediate System (IS-IS) 115
Routing Information Protocol (RIP) 120
Exterior Gateway Protocol (EGP) 140
On Demand Routing (ODR) 160
External EIGRP 170
Internal BGP 200
Unknown* 255
New Questions 12
CORRECT TEXTThere are three locations in a school district of a large city: ROUTER -M, ROUTER -W and ROUTER -U. The network connection between two of these locations has already functioned. Configure the ROUTER -M router IP addresses on the E0 and S0 interfaces so that the E0 receives the first usable subnet while the S0 receives the second usable subnet from the network 192.168.160.0/28. Both interfaces would receive the last available ip address on the proper subnet.
NotE. The OSPF process must be configured to allow interfaces in specific subnets to participate in the routing process.
Answer:
ROUTER-M> enable PassworD. Cisco
ROUTER-M# config t
ROUTER-M(config)# interface e0
ROUTER-M(config-if)# ip address 192.168.160.14 255.255.255.240
ROUTER-M(config-if)# no shutdown
ROUTER -M(config-if)# exit
ROUTER -M(config)# interface s0
ROUTER-M(config-if)# ip address 192.168.160.30 255.255.255.240
ROUTER-M(config-if)# no shutdown
ROUTER-M(config-if)# end
ROUTER-M# copy run start
New Questions 13
Which adverse situation can occur if an Ethernet cable is too long?
A. late collisions
B. giants
C. interface resets
D. runts
Answer: A
100% Refresh Cisco 100-105 Questions & Answers shared by Thedumpscentre, Get HERE: http://www.thedumpscentre.com/100-105-dumps/ (New 347 Q&As)