300-075 Exam
Ultimate Guide: cisco 300 075
Our pass rate is high to 98.9% and the similarity percentage between our 300 075 dump study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Cisco cisco 300 075 exam in just one try? I am currently studying for the Cisco 300 075 dump exam. Latest Cisco 300 075 dump Test exam practice questions and answers, Try Cisco 300 075 dump Brain Dumps First.
Q11. When a SIP trunk is added for Call Control Discovery, which statement is true?
A. The SIP trunk is added by selecting SIP Trunk and SIP Protocol. The Enable SAF check box should be selected.
B. The SIP trunk is added by selecting SIP Trunk and SIP Protocol. The Trunk Service Type should be Call Control Discovery.
C. The SIP trunk is added by selecting Call Control Discovery Trunk and then selecting SIP as the protocol to be used.
D. The SIP trunk is added by selecting SIP Trunk and SIP Protocol. The destination IP address field is configured as ‘SAF’ to indicate that this trunk is used for SAF.
Answer: B
Q12. Which two entities could be represented by device mobility groups? (Choose two.)
A. countries
B. regions
C. directory numbers
D. transcoders
Answer: A,B
Q13. Which two statements about symmetric encryption are true? (Choose two.)
A. With symmetric encryption, the encryption key equals the decryption key.
B. Symmetric encryption is commonly used to sign asymmetric keys.
C. Symmetric encryption is a good choice for real-time encryption of bulk data.
D. Symmetric encryption uses asymmetric keys.
Answer: A,C
Explanation:
Incorrect Answer: B, D There are two basic techniques for encrypting information: symmetric encryption (also called secret key encryption) and asymmetric encryption (also called public key encryption.) in symmetric key As long as both sender and recipient know the secret key, they can encrypt and decrypt all messages that use this key. A public key is made freely available to anyone who might want to send you a message. A second, private key is kept secret, so that only you know it. Link:
http://support.microsoft.com/kb/246071
Q14. Which solution is needed to enable presence and extension mobility to branch office phones during a WAN failure?
A. SRST with MGCP fallback
B. SRST without MGCP fallback
C. Cisco Unified Communications Manager Express in SRST mode
D. SRST with VoIP dial peers to Cisco Unified Communications Manager Express
Answer: C
Q15. Refer to the exhibit.
Assume that NANP is being used and 9 is used for PSTN access code Long distance national calls are preceded with 1.
How should the HQ Cisco Unified Communications Manager be configured for calls to 3XXX to be sent to the gatekeeper at 1 0 1 6 1 with PSTN backups?
A. Configure a route pattern for 3XXX Assign this route pattern to a route list that points to two route groups The first route group contains the H 225 trunk The second route group contains the MGCP gateway with prefix digits 1 408555 for the outgoing called number.
B. Configure a route pattern for 1#3XXX Assign this route pattern to a route list that points to a route group that lists the H 225 trunk as first choice and the MGCP gateway as a second choice.
C. Configure a route pattern for 4085543XXX. Assign this route pattern to a route list that points to two route groups. The first route group contains the H 226 trunk The second route group contains MGCP gateway.
D. Configure a route pattern for 3XXX Assign this route pattern to a route list that points to two route groups The first route group contains the H 225 trunk The second route group contains MGCP gateway with prefix digits 91 408554 for the called number.
Answer: A
Explanation:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/b03rtgrp.html #wpxref46617
Q16. How is the region assigned to a device such as an IP phone?
A. Regions are assigned directly in the device configuration page.
B. Regions can be assigned only through a device pool.
C. Regions can be assigned either directly on the device configuration page or through the device pool. If both configurations exist, the device pool region configuration takes precedence.
D. Regions can be assigned either directly on the device configuration page or through the device pool. If both configurations exist, the device region configuration takes precedence.
Answer: B
Q17. Which action configures PSTN backup for calls that are rejected by the gatekeeper CAC?
A. Configure AAR in Cisco Unified Communications Manager.
B. Configure CFUR in Cisco Unified Communications Manager.
C. Configure a route pattern, a route list, and route groups to a trunk and a gateway in Cisco Unified Communications Manager.
D. Configure a route pattern to a gateway in Cisco Unified Communications Manager.
Answer: C
Q18. How can the location setting be modified to resolve poor call quality?
A. No adjustment to location setting is needed
B. Mark the bandwidth between the locations as unlimited
C. Decrease the audio bandwidth setting
D. Remove the audio bandwidth setting
Answer: C
Q19. Which two statements about the functionality of a gatekeeper are true? (Choose two.)
A. Cisco Unified Communications Manager has gatekeeper functionality built in.
B. Cisco Unified Communications Manager registers with a gatekeeper via SIP.
C. Cisco Unified Communications Manager registers with a gatekeeper via H.323.
D. A gatekeeper can enable CAC and AAR.
E. A gatekeeper can enable CAC, but not AAR.
Answer: C,E
Q20. Which three commands are necessary to override the default CoS to DSCP mapping on interface Fastethernet0/1? (Choose three.)
A. mls qos map cos-dscp 0 10 18 26 34 46 48 56
B. mls qos map dscp-cos 8 10 to 2
C. mls qos
D. interface Fastethernet0/1mls qos trust cos
E. interface Fastethernet0/1mls qos cos 1
F. interface Fastethernet0/2mls qos cos 1
Answer: A,C,D