Q14. On which type of port can switches interconnect for multi-VLAN communication?

A. interface port

B. access port

C. switch port

D. trunk port

Q15. which functionality does split horizon provide ?

A. it Prevents routing loops in distance vector protocols

B. it Prevents switching loops in distance vector protocols

C. it Prevents switching loops in link-state protocols

D. it Prevents routing loops in link-state protocols

Q16. which technology supports multiple dynamic secure connections an unsecure transport network ?

A. DMVPN

B. VPN

C. Site-to-site VPN

D. client VPN

Q17. Which type of MAC address is aged automatically by the switch?

A. automatic

B. manual

C. dynamic

D. static

Q18. Which type of routing protocol operates by using first information from each device peers?

A. link-state protocols

B. distance-vector protocols

C. path-vector protocols

D. exterior gateway protocols

Q19. Scenario:

You work for a company that provides managed network services, and of your real estate clients running a small office is experiencing network issues, Troubleshoot the network issues.

Router R1 connects the main office to internet, and routers R2 and R3 are internal routers NAT is enabled on Router R1.

The routing protocol that is enable between routers R1, R2, and R3 is RIPv2.

R1 sends default route into RIPv2 for internal routers to forward internet traffic to R1. Server1 and Server2 are placed in VLAN 100 and 200 respectively, and dare still running

router on stick configuration with router R2.

You have console access on R1, R2, R3, and L2SW1 devices. Use only show commands to troubleshoot the issues.

What is the correct statement below after examining the R1 routing table?

A. Traffic that is destined to 10.10.10.0/24 from R1 LAN network uses static route instead RIPv2 Because the static route AD that is configured is less than the AD of RIPv2

B. Traffic that is destined to 10.10.10.0/24 from R1 LAN network uses RIPv2 instead static

route Because the static route AD that is configured is higher than the AD of RIPv2

C. Traffic that is destined to 10.10.10.0/24 from R1 LAN network uses static route instead RIPv2 But the traffic is forwarded to the ISP instead of the internal network.

D. Traffic that is destined to 10.10.10.0/24 from R1 LAN network uses RIPv2 instead static route Because the static route AD that is configured is 255

Q20. Refer to the exhibit .

if R1 sends Traffic to 192.168.10.45 the traffic is sent through which interface ?

A. FastEthernet 0/1

B. FastEthernet 0/0

C. FastEthernet 1/0

D. FastEthernet 1/1

Q21. Refer to the exhibit.

If RTR01 as configured as shown, which three addresses will be received by other routers that are running EIGRP on the network? (Choose three.)

A. 172.16.4.0

B. 10.0.0.0

C. 172.16.0.0

D. 192.168.2.0

E. 192.168.0.0

F. 10.4.3.0

Q22. In which byte of an IP packet can traffic be marked ?

A. the Tos byte

B. the Qos byte

C. the Cos byte

D. the Dscp byte

Q23. which layer of the osi model does PPP perform ?

A. Layer 2

B. Layer 3

C. Layer 5

D. Layer 1