Microsoft Microsoft exam is identified as Microsoft 70-680 which is a new Microsoft certification exam. The Microsoft 70-680 certificate is often a threshold in the industry of The idea and a desire of every one of the ambitious professionals. Should you intend to obtain the particular 70-680 certification, youd better exert a lot more efforts around the preparation. Ucertify.com gives you a new shortcut to obtain the Microsoft certification easier and earlier. You can get pleasure from not only the particular general details and review tips nevertheless also the particular training materials. Start correct now along with make entire preparation for the Microsoft 70-680 exam.
Q71. HOTSPOT - (Topic 4)
You have a computer running Windows 7 Enterprise. You need to set up a VPN connection using PPP protocol over SSL (Secure Socket Layer) using HTTPS channel. What type of VPN connection would you need?
Answer:
Q72. - (Topic 3)
You manage several computers that run Windows 7.
A user wants to roll back a driver.
The user opens the device properties in Device Manager and discovers that the Roll Back Driver option is unavailable.
You connect to the computer by using Windows Remote Assistance.
You need to roll back the driver to its previous version.
What should you do first?
A. Add the user to the Power Users group.
B. Right-click Device Manager and select Run as administrator.
C. From System Properties, modify Device Installation Settings.
D. From the Local Group Policy, modify Device Installation Restrictions.
Answer: B
Explanation:
You can open Device Manager on a computer running Windows 7 while logged on with any account. However, by default, only administrators can make changes to devices and install, uninstall, and roll back drivers. You can open Device Manager in the following ways: - In Control Panel, click Hardware And Sound. Click Device Manager under Devices And Printers.
-Click Start, right-click Computer, and choose Manage. Click Device Manager in the Computer Management tree pane.
-Open an elevated command prompt and enter mmc devmgmt.msc. Note that if you do not run the command prompt as administrator, Device Manager opens as read-only.
Q73. - (Topic 4)
You need to identify the hardware failures that have occurred on your computer in the past six months.
What should you do?
A. From the Control Panel, open Performance Information and Tools.
B. From the Control Panel, open Troubleshooting.
C. From the Action Center, under Maintenance, click the View reliability history.
D. From the Action Center, open Recovery.
Answer: C
Q74. - (Topic 6)
You administer computers that have Windows 7 and Internet Explorer 8 installed.
You want to log on to one of the computers and access a web-based management application that runs on a server by using Internet Explorer.
You need to ensure that any data about your browser session is not saved on the computer.
What should you do?
A. Disable Internet Connection Sharing.
B. From the Local Group Policy, enable the InPrivate Filtering Threshold setting.
C. From the Safety drop-down menu, open an InPrivate Browsing session.
D. From Internet Options, on the Advanced tab, clear Enable DOM Storage.
Answer: B
Q75. - (Topic 2)
You have a computer that runs Windows 7.
You perform regular data backups and system image backups. The computer experiences a hard disk failure. You replace the failed hard disk.
You need to recover the computer to the previous Windows 7 environment.
You start the computer from the Windows 7 installation media.
Which recover option should you select?
A. Command Prompt
B. Startup Repair
C. System Image Recovery
D. System Restore
Answer: C
Explanation:
System Image Recovery Enables you to implement a System Image restore. You would choose this option if your hard disk failed or needed to be wiped. If system changes are causing problems, you would choose the System Restore option.NOT Startup Repair Automatically fixes problems that prevent Windows from starting. If Windows 7 had boot problems during a previous restart, a normal boot (without accessing the Advanced Boot dialog box) gives you the option of selecting Startup Repair.NOT System Restore Gives you another method of starting a system restore to a previous restore point. Because you can access this menu when you boot from a DVD-ROM, this lets you repair your system when recent changes to system settings prevent your computer from booting normally.NOT Command Prompt Gives access to the file system, volumes, and files through a command-line interface.
Q76. - (Topic 4)
A company has client computers that run Windows 7 Enterprise.
A user is asked to remove encryption from a locally saved folder so that other users can read and write to that folder.
You need to verify that the folder is not encrypted with the Encrypting File System (EFS).
What should you use to accomplish this goal?
A. Device Manager
B. Local Users and Groups
C. the User Account Control Settings Control Panel window
D. the icacls command
E. the Group Policy management console
F. share permissions
G. the netsh command
H. the Services management console
I. the folder Properties window
Answer: I
Explanation:
http://technet.microsoft.com/en-us/windows/how-do-i-get-started-with-the-encrypting-file-system-in-windows-7.aspx
Q77. - (Topic 2)
You have a computer that runs Windows 7.
You need to provide standard users the ability to update the drivers for display adapters.
What should you modify from the Local Group Policy?
A. driver installation settings for the user
B. device installation settings for the computer
C. driver installation settings for the computer
D. display settings for the user
Answer: C
Explanation:
To Update the Drivers you need permissions to install drivers. Apply this to the computer for all local users, as opposed to only one user.
Q78. - (Topic 2)
You have a computer that runs Windows 7. The computer contains one hard disk. The hard disk is configured as shown in the following table.
You install a new 250-GB hard disk in the computer.
You need to ensure that all the files on the computer are available if a single disk fails.
What should you do?
A. Create a mount point on C and D and then create a striped volume.
B. Create a mount point on C and D and then create two striped volumes.
C. Convert both disks to dynamic disks and then create a mirrored volume.
D. Convert both disks to dynamic disks and then create two mirrored volumes.
Answer: D
Explanation:
Creating a Mirrored Volume (RAID-1)A mirrored or RAID-1 volume provides availability and fault tolerance but does not improve performance. It uses two disks (or two portions on separate disks) that are the same size. Any changes made to the first disk of a mirror set are also made to its mirror disk. If the first disk fails, the mirror is broken and the second disk is used until the first is repaired or replaced. The mirror is then re-created, and the information on the working disk is mirrored on the repaired disk. The disadvantage of RAID-1 is that you need (for example) two 200-GB disks to hold 200 GB of data. The advantage is that you can mirror a system disk containing your operating system.You create a mirrored volume using a very similar procedure to the one that creates a striped volume, except that you right-click the first disk of your mirror and click New Mirrored Volume to start the appropriate wizard. You then select the second disk. The second disk needs to have a portion of unallocated space that is at least as large as the disk you want to mirror. The drive letter for a mirrored volume is the same as the drive letter of the first disk. You can also use the Diskpart tool to create a mirrored volume. At the DISKPART> prompt you first use the select disk command to select the first disk. You then enter a command with the syntax add disk=<n>to specify the mirror disk.
Q79. - (Topic 1)
You have a reference computer that runs Windows 7.
You plan to create an image of the computer and then deploy the image to 100 computers.
You need to prepare the reference computer for imaging.
What should you do before you create the image?
A. Run Package Manager.
B. Run the System Preparation tool.
C. Install the User State Migration Tool.
D. Install Windows Automated Installation Kit.
Answer: B
Explanation:
Sysprep Sysprep is a tool designed for corporate system administrators, OEMs, and others who need to deploy the Windows. XP operating system on multiple computers. After performing the initial setup steps on a single system, you can run Sysprep to prepare the sample computer for cloning. Sysprep prepares the image for capture by cleaning up various user-specific and computer-specific settings, as well as log files. The reference installation now is complete and ready to be imaged.
Q80. - (Topic 3)
You have a computer named Computer1 that runs Windows 7 and Windows Internet Explorer 8.
A user reports that Computer1 has a number of Internet Explorer configuration issues that cause instability when browsing the Internet.
You need to configure Internet Explorer to use all default settings.
What should you do from Internet Options?
A. From the Advanced tab, click Reset.
B. From the Programs tab, click Set programs.
C. From the Advanced tab, click Restore advanced settings.
D. From the Security tab, click Reset all zones to default level.
Answer: A
Explanation:
Reset Internet Explorer settings By resetting Internet Explorer settings, you return Internet Explorer to the state it was in when it was first installed on your computer. This is useful for troubleshooting problems that might be caused by settings that were changed after installation. When you delete personal settings, some webpages that rely on previously stored cookies, form data, passwords, or previously installed browser add-ons might not work correctly. Resetting Internet Explorer to its default settings does not delete your favorites, feeds, Web Slices, and a few other personalized settings. See the table below for a complete list of all settings and information about whether they are reset or maintained. Resetting Internet Explorer's settings is not reversible. After a reset, all previous settings are lost and cannot be recovered. Rather than resetting everything, you might want to reset specific settings or delete your webpage history. For more information, see the links at the bottom of this topic.
To reset Internet Explorer settings
1. Close any Internet Explorer or Windows Explorer windows that are currently open.
2. Click to open Internet Explorer.
3. Click the Tools button, and then click Internet Options.
4. Click the Advanced tab, and then click Reset.
5. Select the Delete personal settings check box if you would like to remove browsing history, search providers, Accelerators, home pages, and InPrivate Filtering data.
6. In the Reset Internet Explorer Settings dialog box, click Reset.
7. When Internet Explorer finishes restoring the settings, click Close, and then click OK.
8. Close Internet Explorer.
Your changes will take effect the next time you open Internet Explorer.