70-680 Exam
Secrets to testking for 70-680
Almost two thousands of exams are generally presented as Pdf at Exambible. In addition, our Pdf pertaining to Microsoft 70-680 prep dump gets essentially the most usage amount. The particular reason will be that the Microsoft braindumps are thus abundant that individuals browse with bare minimum time spend and greatest knowledge gained. You must make complete use of your current spare time to be able to learn your Microsoft 70-680 practice materials. The particular accuracy will be enhanced using the help regarding Microsoft Microsoft study guide. These Microsoft Microsoft online demos contained in the Pdf would be the quickest way toward success in 70-680 real check. The updated Microsoft Microsoft exam papers are generally free. Participating your Microsoft Microsoft on-line bootcamp, you will be confident enough to look at the exam your first attempt.
2021 Nov pass mark for 70-680:
Q341. - (Topic 2)
You have a computer that runs Windows 7.
You need to copy files to a virtual hard disk (VHD) file.
What should you do first?
A. Run Dism.exe and specify the /image and /online parameters.
B. Open Windows Explorer, right-click the VHD file and select Open.
C. Run Diskpart.exe and then run the Select and Attach commands.
D. Run Imagex.exe and specify the /mountrw and /append parameters.
Answer: C
Explanation:
DiskpartMicrosoft command-line tool Diskpart is used to create and format volumes on the target computer.SelectShift the focus to an object.AttachAttaches a virtual disk file.
Q342. - (Topic 3)
You download a Windows PowerShell snap-in.
You need to ensure that the snap-in is automatically imported when you open a new PowerShell session.
What should you do?
A. Modify the PowerShell execution policy.
B. Create a new PowerShell manifest file. Update the PowerShell shortcut and specify the file option.
C. Create a new PowerShell console file. Update the PowerShell shortcut and specify the psconsolefile option.
D. Create a new PowerShell formatting and type file. Copy the file to the %SystemRoot%\system32 \WindowsPowerShell\v1.0 folder.
Answer: C
Explanation:
PSConsoleFile Loads the specified Windows PowerShell console file. To create a console file, use the Export-Console cmdlet in Windows PowerShell.
Export-Console The Export-Console cmdlet exports the names of the Windows PowerShell snap-ins in the current session to a Windows PowerShell console file (.psc1). You can use this cmdlet to save the snap-ins for use in future sessions. To add the snap-ins in the .psc1 console file to a session, start Windows PowerShell (Powershell.exe) at the command line by using Cmd.exe or another Windows PowerShell session, and then use the PSConsoleFile parameter of Powershell.exe to specify the console file.
Q343. - (Topic 5)
You administer computers that have Windows 7 and Internet Explorer 8 installed.
You want to log on to one of the computers and access a web-based management application that runs on a server by using Internet Explorer.
You need to ensure that any data about your browser session is not saved on the computer.
What should you do?
A. From Internet Options, modify the security settings for the Internet zone.
B. From the Local Group Policy, enable the InPrivate Filtering Threshold setting.
C. From Internet Options, select Delete browsing history on exit.
D. From Internet Options, on the Advanced tab, clear Enable DOM Storage.
Answer: C
Q344. - (Topic 2)
You are deploying a custom Windows 7 system image to a new computer.
You perform the following tasks:
. Start the new computer by using the Windows Preinstallation Environment (Windows PE)
. Connect to a shared network location that contains the Windows 7 image file
You need to apply the Windows 7 image to the computer.
What should you do before you apply the image?
A. Mount the image.
B. Configure Windows Firewall.
C. Configure and format the hard disk drive.
D. Initialize the Boot Configuration Data (BCD) store.
Answer: C
Explanation:
Deploying from a Network Share After you have imaged your reference installation, you can deploy the image onto new hardware (one or more destination computers). To access a network share as an installation source from the client computer, you need to boot the client computer into the Windows Preintallation Environment (Windows PE) environment. The Windows PE environment is a minimally featured operating system that allows you to access diagnostic and maintenance tools as well as access network drives. To deploy an image from a network share, you use the Diskpart tool to format the hard drive of a destination computer . Then you copy the image from the network share and begin the installation by running Setup.exe.
Q345. - (Topic 3)
You have an offline virtual hard disk (VHD) that contains a generalized installation of Windows 7 Ultimate.
You need to disable the built-in games in the VHD. You must achieve this goal by using the minimum amount of administrative effort.
What should you do?
A. Start a computer from the VHD. Run Ocsetup.exe and specify the /uninstall parameter. Recapture the VHD.
B. Start a computer from the VHD. From Programs and Features, turn off the Games feature and then recapture the VHD.
C. Create an answer file that has InboxGames disabled. On a computer that runs Windows 7, attach the VHD. Run Pkgmgr.exe and specify the /uu parameter.
D. Create an answer file that has InboxGames disabled. On a computer that runs Windows 7, attach the VHD. Run Dism.exe and specify the /apply-unattend parameter.
Answer: D
Explanation:
Dism Deployment Image Servicing and Management (DISM) is a command-line tool used to service Windows. images offline before deployment. You can use it to install, uninstall, configure, and update Windows features, packages, drivers, and international settings. Subsets of the DISM servicing commands are also available for servicing a running operating system. /Apply-Unattend (Applies an unattend.xml file to an image.) If you are updating device drivers using an unattended answer file, you must apply the answer file to an offline image and specify the settings in the offlineServicing configuration pass. If you are updating packages or other settings using an unattended answer file, you can apply the answer file to an offline or online image. Specify the settings in the offlineServicing configuration pass.
Abreast of the times windows 7 configuration exam 70-680 pdf:
Q346. - (Topic 2)
You have a dual boot PC running both Vista and Windows 7 on partitions on the computer. Which file would you edit to force the PC to book Vista by default?
A. boot.ini
B. ntfsboot.cfg
C. bcdedit.exe
D. system.cfg
Answer: C
Q347. - (Topic 2)
You have a computer that runs Windows 7.
You need to identify which hardware is required to create a system repair disc.
What hardware should you indentify?
A. CD/DVD burner.
B. Floppy disk.
C. Tape drive.
D. USB disk.
Answer: A
Q348. - (Topic 2)
You have a customized image of Windows 7 Professional.
You mount the image and modify the contents of the image.
You need to restore the image to its original state.
Which tool should you use?
A. Dism.exe
B. Ocsetup.exe
C. Pkgmgr.exe
D. Sysprep.exe
Answer: A
Explanation:
Dism Deployment Image Servicing and Management (DISM) is a command-line tool used to service Windows images offline before deployment. You can use it to install, uninstall, configure, and update Windows features, packages, drivers, and international settings. Subsets of the DISM servicing commands are also available for servicing a running operating system. Windows 7 introduces the DISM command-line tool. You can use DISM to service a Windows image or to prepare a Windows PE image. DISM replaces Package Manager (Pkgmgr.exe), PEimg, and Intlcfg in Windows Vista, and includes new features to improve the experience for offline servicing. You can use DISM to perform the following actions:
* Prepare a Windows PE image.
* Enable or disable Windows features within an image.
* Upgrade a Windows image to a different edition.
* Add, remove, and enumerate packages.
* Add, remove, and enumerate drivers.
* Apply changes based on the offline servicing section of an unattended answer file.
* Configure international settings.
* Implement powerful logging features.
* Service operating systems such as Windows Vista with SP1 and Windows Server 2008.
* Service a 32-bit image from a 64-bit host and service a 64-bit image from a 32-bit host.
* Service all platforms (32-bit, 64-bit, and Itanium).
* Use existing Package Manager scripts.
DISM Command-Line Options
To service a Windows image offline, you must apply or mount it. WIM images can be mounted using the WIM commands within DISM, or applied and then recaptured using ImageX. You can also use the WIM commands to list the indexes or verify the architecture for the image you are mounting. After you update the image, you must dismount it and then either commit or discard the changes you have made.
NOT Sysprep
Sysprep is a tool designed for corporate system administrators, OEMs, and others who need to deploy the Windows XP operating system on multiple computers. After performing the initial setup steps on a single system, you can run Sysprep to prepare the sample computer for cloning. Sysprep prepares the image for capture by cleaning up various user-specific and omputerspecific settings, as well as log files. The reference installation now is complete and ready to be imaged.
Q349. - (Topic 2)
You have a computer that runs Windows 7 and Windows Internet Explorer 8. You discover that your browsing history is sent to a third-party advertising content provider. You need to prevent the browsing history from being sent only to that specific content provider. What should you do?
A. Enable InPrivate Filtering and click Automatically block.
B. Add the Web site for the content provider to the Restricted sites zone.
C. Enable InPrivate Filtering and select the Choose content to block or allow option.
D. View the privacy policy for the Web site and enable the Never allow this site to use cookies option.
Answer: C
Q350. - (Topic 2)
You have a computer that runs windows 7.
You have a third-party application.
You need to ensure that only a specific version of the application runs on the computer.
You have the application vendor's digital signature.
What should you do?
A. From Application Control Policies, configure a path rule.
B. From Application Control Policies, configure a publisher rule.
C. From Software Restriction policies, configure a path rule.
D. From Software Restriction policies, configure a certificate rule.
Answer: B
Explanation:
AppLocker Application Control Policies AppLocker is a feature new to Windows 7 that is available only in the Enterprise and Ultimate editions of the product. AppLocker policies are conceptually similar to Software Restriction Policies, though AppLocker policies have several advantages, such as the ability to be applied to specific user or group accounts and the ability to apply to all future versions of a product. As you learned earlier in this chapter, hash rules apply only to a specific version of an application and must be recalculated whenever you apply software updates to that application. AppLocker policies are located in the Computer Configuration\Windows Settings\ Security Settings \Application Control Policies node of a standard Windows 7 or Windows Server 2008 R2 GPO. AppLocker relies upon the Application Identity Service being active. When you install Windows 7, the startup type of this service is set to Manual. When testing AppLocker, you should keep the startup type as Manual in case you configure rules incorrectly. In that event, you can just reboot the computer and the AppLocker rules will no longer be in effect. Only when you are sure that your policies are applied correctly should you set the startup type of the Application Identity Service to Automatic. You should take great care in testing AppLocker rules because it is possible to lock down a computer running Windows 7 to such an extent that the computer becomes unusable. AppLocker policies are sometimes called application control policies. AppLocker Application Control Policies - Publisher Rules Publisher rules in AppLocker work on the basis of the code-signing certificate used by the file's publisher. Unlike a Software Restriction Policy certificate rule, it is not necessary to obtain a certificate to use a publisher rule because the details of the digital signature are extracted from a reference application file. If a file has no digital signature, you cannot restrict or allow it using AppLocker publisher rules. Publisher rules allow you more flexibility than hash rules because you can specify not only a specific version of a file but also all future versions of that file. This means that you do not have to re-create publisher rules each time you apply a software update because the existing rule remains valid. You can also allow only a specific version of a file by setting the Exactly option.AppLocker Application Control Policies - Path RulesAppLocker path rules work in a similar way to Software Restriction Policy path rules. Path rules let you specify a folder, in which case the path rule applies to the entire contents of the folder, including subfolders, and the path to a specific file. The advantage of path rules is that they are easy to create. The disadvantage of path rules is that they are the least secure form of AppLocker rules. An attacker can subvert a path rule if they copy an executable file into a folder covered by a path rule or overwrite a file that is specified by a path rule. Path rules are only as effective as the file and folder permissions applied on the computer.
Software Restriction Policies Software Restriction Policies is a technology available to clients running Windows 7 that is available in Windows XP, Windows Vista, Windows Server 2003, and Windows Server 2008. You manage Software Restriction Policies through Group Policy. You can find Software Restriction Policies in the Computer Configuration \Windows Settings\Security Settings\Software Restriction Policies node of a group policy. When you use Software Restriction Policies, you use the Unrestricted setting to allow an application to execute and the Disallowed setting to block an application from executing. You can achieve many of the same application restriction objectives with Software Restriction Policies that you can with AppLocker policies. The advantage of Software Restriction Policies over AppLocker policies is that Software Restriction Policies can apply to computers running Windows XP and Windows Vista, as well as to computers running Windows 7 editions that do not support AppLocker. The disadvantage of Software Restriction Policies is that all rules must be created manually because there are no built-in wizards to simplify the process of rule creation.Software Restriction Policies - Path Rules Path rules, allow you to specify a file, folder, or registry key as the target of a Software Restriction Policy. The more specific a path rule is, the higher its precedence. For example, if you have a path rule that sets the file C: \Program files\Application\App.exe to Unrestricted and one that sets the folder C:\Program files\Application to Disallowed, the more specific rule takes precedence and the application can execute. Wildcards can be used in path rules, so it is possible to have a path rule that specifies C:\Program files\Application\*.exe. Wildcard rules are less specific than rules that use a file's full path. The drawback of path rules is that they rely on files and folders remaining in place. For example, if you created a path rule to block the application C:\Apps\Filesharing.exe, an attacker could execute the same application by moving it to another directory or renaming it something other than Filesharing.exe. Path rules work only when the file and folder permissions of the underlying operating system do not allow files to be moved and renamed. Software Restriction Policies - Certificate Rules Certificate rules use a code-signed software publisher's certificate to identify applications signed by that publisher. Certificate rules allow multiple applications to be the target of a single rule that is as secure as a hash rule. It is not necessary to modify a certificate rule in the event that a software update is released by the vendor because the updated application will still be signed using the vendor's signing certificate. To configure a certificate rule, you need to obtain a certificate from the vendor. Certificate rules impose a performance burden on computers on which they are applied because the certificate's validity must be checked before the application can execute. Another disadvantage of certificate rules is that they apply to all applications from a vendor. If you want to allow only 1 application from a vendor to execute but the vendor has 20 applications available, you are better off using a different type of Software Restriction Policy because otherwise users can execute any of those other 20 applications.