70-680 Exam
The only 70-680 windows 7 configuration pdf resources for you
Rise above this Microsoft 70-680 e book plus dive regularly into 70-680 Test newspapers using the absolutely incomparable TS:Windows 7,Configuring ¡§C Microsoft 70-680 Train Test Companies at Actualtests. 70-680 Train Test plus 70-680 are generally remarkable in Level of quality plus Actualtests give 100% guarantee you successfully pass the 70-680 Test.
2021 Sep 70-680 windows 7:
Q371. - (Topic 3)
A user named User1 uses a shared computer that runs Windows 7.
User1 is a standard user. User1 attempts to connect a USB device to the computer and is prompted to enter administrative credentials.
You need to ensure that User1 can use the USB device without requiring administrative credentials.
What should you do first?
A. Add User1 to the Power Users group.
B. Run Pnputil.exe and specify the - i- a parameters.
C. Run Driverquery.exe and specify the /SI parameter.
D. Copy the driver files to the C:\windows\system32 folder.
Answer: B
Explanation:
When a driver is staged, it is placed in the device driver store and non-administrators can install the device, provided they have permission to install devices in the appropriate device setup class. Pnputil.exe is a command line utility that you can use to manage the driver store. You can use Pnputil to add driver packages, remove driver packages, and list driver packages that are in the store. -i Specifies to install the identified INF file. Cannot be used in conjunction with the -f parameter.
Example pnputil.exe -i -a a:\usbcam\USBCAM.INF Adds and installs the specified driver
Q372. - (Topic 3)
You have a computer that runs Windows 7.
A user reports that he is unable to access network resources. You run Ipconfig.exe as shown in the IPConfig exhibit. (Click the Exhibit button.)
You open Device Manager as shown in the Device Manager exhibit. (Click the Exhibit button.)
You need to ensure that the user can connect to the network.
What should you do?
A. From Device Manager, enable the network adapter.
B. From Device Manager, update the driver for the network adapter.
C. At a command prompt, run Ipconfig /renew.
D. At a command prompt, run Netsh ip set address "local area connection" dhcp.
Answer: A
Explanation:
IP Configuration should look something like this, if network adapter is enabled.
The icon displayed in Device Manager indicates that network adapter is disabled. Therefore, enable the network adapter.
Q373. - (Topic 5)
You use a portable computer that has Windows 7 SP1 Ultimate installed.
You update the driver for the computer's video card and the computer becomes unresponsive.
You need to be able to roll back the video card driver.
What should you do?
A. Restart the computer in safe mode.
B. Start the computer, press F8, and then select Repair Your Computer.
C. Boot the computer from a Windows Recovery Environment (Windows RE) disk, and then restore the system image.
D. Start the computer, press F8, and then select Debugging Mode.
Answer: A
Q374. HOTSPOT - (Topic 6)
You have a windows 7 computer connected to a local subnet.
From the command prompt, you ping an IP address on the local network, but you get no response.
You need to configure your computer to ping the IP address.
Which two fields of TCF/IPV4 Properties should you configure? (To answer, select the appropriate two fields in the TCP/IPv4 Properties in the answer area.)
Answer:
Q375. - (Topic 2)
Your network consists of an Active Directory domain and 100 computers that run Windows 7.
The domain contains a logon script named logon.cmd.
You plan to deploy a new application named app1.msi by using the logon script. App1.msi is stored in \\server1\share1.
You need to modify the logon script to deploy the application.
What should you include in the logon script?
A. Sbdinst.exe -u \\server1\share1\app1.msi -q
B. Msinfo32.exe \\server1\share1\app1.msi
C. Pkgmgr.exe /ip /m:\\server1\share1\app1.msi
D. Msiexec.exe /i \\server1\share1\app1.msi /quiet
Answer: D
Explanation:
Msiexec Provides the means to install, modify, and perform operations on Windows Installer from the command line.
To install or configure a product Syntax msiexec /i {package|ProductCode} /i : Installs or configures a product.
NOT Msinfo32 Displays a comprehensive view of your hardware, system components, and software environment.
Improve mcsa 70-680:
Q376. - (Topic 6)
A company has Windows 7 Enterprise computers that use BitLocker drive encryption on operating system drives.
You need to configure multi-factor authentication before client computers are booted into Windows.
On each client computer, what should you do?
A. Configure a TPM PIN.
B. Implement fingerprint authentication.
C. Implement a Dynamic Access Control policy.
D. Install a standalone certification authority server.
Answer: A
Explanation: BitLocker supports multifactor authentication for operating system drives. If you enable BitLocker on a computer that has a TPM version 1.2, you can use additional forms of authentication with the TPM protection. BitLocker offers the option to lock the normal boot process until the user supplies a personal identification number (PIN) or inserts a USB device (such as a flash drive) that contains a BitLocker startup key, or both the PIN and the USB device can be required. These additional security measures provide multifactor authentication and help ensure that the computer will not start or resume from hibernation until the correct authentication method is presented.
Q377. - (Topic 2)
You have a computer that runs Windows Vista. The hard disk is configured as shown in the exhibit. (Click the Exhibit button.)
You need to install Windows 7 in a dual-boot configuration.
What should you do?
A. From Windows Vista, extend Disk 0 Partition 1. Install Windows 7 in Disk 0 Partition 1.
B. From Windows Vista, create a new partition. Install Windows 7 in Disk 0 Partition 1.
C. Start the computer from the Windows 7 installation media. Install Windows 7 in Disk 0 Partition 1.
D. Start the computer from the Windows 7 installation media. Install Windows 7 in the unallocated space on Disk 0.
Answer: D
Explanation:
The key to configuring dual-booting is ensuring that each operating system has its own partition or hard disk drive.
To dual-boot with Windows 7, you need to be able to create a new volume of at least 15 GB. Even if you have more free space available on the volume you want to shrink, you may not be able to create a volume of the appropriate size because Windows Vista may not be able to move some special types of data to a different place on the hard disk drive.
When configuring a new computer to boot between multiple operating systems, it is also necessary to install operating systems in the order that they were released. For example, if you want to boot between Windows XP and Windows 7 on a new computer, you need to install Windows XP before you install Windows 7. If you install Windows XP after Windows 7, the Windows XP installation routine cannot recognize the Windows 7 operating system installation, and the computer only boots into Windows XP. It is possible to repair the computer from this point using Windows 7 startup repair so that it dual-boots, but the simplest course of action is just to install the operating systems in the order in which they were released by Microsoft.
Q378. - (Topic 5)
You use a computer that has Windows 7 Enterprise installed.
You install Windows Vista Enterprise to a different partition. You discover that the computer boots to Windows Vista by default.
You need to ensure that the computer boots to Windows 7 Enterprise by default.
What should you do?
A. On the Boot tab in the msconfig tool, highlight the Windows 7 boot entry and select the Set as default button.
B. From an elevated command prompt in Windows Vista, run the bcdedit /default {current} command.
C. On the Boot tab in the msconfig tool, highlight the Windows 7 boot entry and select the Advanced options button.
D. From an elevated command prompt in Windows Vista, run the bcdedit /default {default} command.
Answer: A
Q379. - (Topic 1)
Your company has an Active Directory domain. All computers are members of the domain.
Your network contains an internal Web site that uses Integrated Windows Authentication.
From a computer that runs Windows 7, you attempt to connect to the Web site and are prompted for authentication.
You verify that your user account has permission to access the Web site.
You need to ensure that you are automatically authenticated when you connect to the Web site.
What should you do?
A. Create a complex password for your user account.
B. Open Credential Manager and modify your credentials.
C. Add the URL of the Web site to the Trusted sites zone.
D. Add the URL of the Web site to the Local intranet zone.
Answer: D
Explanation:
Local Intranet Sites in the Local Intranet zone are computers on your organizational intranet. Internet Explorer can be configured to detect intranet sites automatically. It is also possible to add Web sites to this zone by clicking the Advanced button on the Local Intranet sites dialog box, as shown in the figure. The default security level of this zone is Medium-Low. Protected Mode is not enabled by default for sites in this zone.
Security settings are configured primarily by assigning sites to zones. Sites that require elevated privileges should be assigned to the Trusted Sites zone. Sites that are on the intranet are automatically assigned to the Local Intranet zone, though this may require manual configuration in some circumstances. All other sites are assigned to the Internet zone. The Restricted Sites zone is used only for Web sites that may present security risks but must be visited.
Q380. - (Topic 4)
You use a portable computer that has Windows 7 installed. The computer has a single hard disk drive and a dual-core CPU.
You need to analyze the performance of the computer to meet the following requirements:
. Include the CPU, Memory, Disk and Graphics subsystems.
. Rate the subsystems and find out the lowest-rated component.
What should you do?
A. Run powercfg.exe.
B. Run the Windows Experience Index.
C. Configure Event Viewer subscriptions.
D. Open Task Manager.
E. Open System Properties, and configure performance settings.
F. Open System Properties, and configure environment variables.
G. Open System Properties, and configure user profiles settings.
H. Open System Properties, and configure the page file settings.
I. Open Performance Monitor, and configure a Data Collector Set.
J. Open Performance Monitor, and customize the System Monitor view.
Answer: B