It is more faster and easier to pass the Microsoft 70-680 exam by using Validated Microsoft TS:Windows 7,Configuring questuins and answers. Immediate access to the Updated 70-680 Exam and find the same core area 70-680 questions with professionally verified answers, then PASS your exam with a high score now.
Q271. - (Topic 6)
You have a computer that runs Windows 7.
The computer's hard disks are configured as shown in the following table.
You need to ensure that you can recover the operating system and all the files on the computer if hard disk 0 experiences hardware failure.
What should you do?
A. Use the Backup and Restore tool to create a system image on an external hard disk.
B. Create a restore point for both hard disks.
C. Use the Backup and Restore tool to back up data files for all users.
D. Shrink drive C and then create a new partition.
Answer: A
Explanation: System Image in Windows 7 The new backup utilities in Windows 7 are actually pretty impressive and creating an image will be possible in all versions. Today we take a look at creating a backup image of your machine without the need for a third party utility like Ghost or True Image.
You are just finished installing a fresh copy of Windows 7 on your computer and have it set up to your liking. One of the first things you should do now is create an image of the disc so in the event of a crash you will be able to restore it to its current state. An image is an exact copy of everything on the drive and will restore it back to its current state. It's probably best to create an image when everything is clean and organized on your system. This will make the image file smaller and allows you to restore the system with a smooth running set up.
Q272. - (Topic 4)
A company has a server running Windows Server 2008 R2, with Windows Deployment Services (WDS), the Microsoft Deployment Toolkit (MDT), and the Windows Automated Installation Kit (WAIK) set up. The company also has client computers running Windows 7 Enterprise.
You are preparing to capture an image of a Windows 7 client computer.
You need to ensure that the captured image is generic and does not contain the device drivers from the client computer.
What should you do?
A. use Sysprep with an answer file and set the PersistAllDeviceInstalls option in the answer file to True.
B. Run the Start /w ocsetup command.
C. Run the PEImg /Prep command.
D. Run the Dism command with the /Mount-Wimoption.
E. Use Sysprep with an answer file and set the UpdateInstalledDrivers option in the answer file to No.
F. Run the Dism command with the /Add-Driver option.
G. Use Sysprep with an answer file and set the UpdateInstalledDrivers option in the answer file to Yes.
H. Run the BCDEdit/delete command.
I. Run the ImageX command with the /Mount parameter.
J. Run the Dism command with the /Add-Package option.
K. Add a boot image and create a capture image in WDS.
L. Use Sysprep with an answer file and set the PersistAllDeviceInstalls option in the answer file to False.
M. Run the DiskPart command and the Attach command option.
Answer: L
Explanation:
Persisting Plug and Play Device Drivers During generalize You can persist device drivers when you run the Sysprep command with the /generalize option by specifying the PersistAllDeviceInstalls setting in the Microsoft-Windows-PnPSysprep component. During the specialize configuration pass, Plug and Play scans the computer for devices and installs device drivers for the detected devices. By default, these device drivers are removed from the system when you generalize the system. If you set PersistAllDeviceInstalls to true in an answer file, Sysprep will not remove the detected device drivers. For more information, see the Unattended WindowsSetup Reference (Unattend.chm). http://technet.microsoft.com/en-us/library/dd744512(WS.10).aspx
Q273. - (Topic 4)
Your company has a server that runs Windows Server 2008 R2. The server is configured as a remote access server.
The external firewall has TCP port 80 and TCP port 443 open for remote access connections.
You have a home computer that runs Windows 7.
You need to establish secure remote access connection from the home computer to the remote access server.
Which type of connection should you configure?
A. IPSEC
B. L2TP
C. PPTP
D. SSTP
Answer: D
Explanation:
Secure Socket Tunneling Protocol Secure Socket Tunneling Protocol (SSTP) is a new form of VPN tunnel with features that allow traffic to pass through firewalls that block PPTP and L2TP/IPsec traffic. SSTP provides a mechanism to encapsulate PPP traffic over the SSL channel of the HTTPS protocol. The use of PPP allows support for strong authentication methods such as EAP-TLS. The use of HTTPS means traffic will flow through TCP port 443, a port commonly used for Web access. Secure Sockets Layer (SSL) provides transport-level security with enhanced key negotiation, encryption, and integrity checking.
Q274. - (Topic 4)
You use a portable computer that has Windows 7 installed. The computer has a single hard disk drive and a dual-core CPU.
You need to analyze the performance of the computer to meet the following requirements:
. Include the CPU, Memory, and Disk subsystems.
. Send notifications to an administrator for predefined thresholds.
What should you do?
A. Run powercfg.exe.
B. Run the Windows Experience Index.
C. Configure Event Viewer subscriptions.
D. Open Task Manager.
E. Open System Properties, and configure performance settings.
F. Open System Properties, and configure environment variables.
G. Open System Properties, and configure user profiles settings.
H. Open System Properties, and configure the page file settings.
I. Open Performance Monitor, and configure a Data Collector Set.
J. Open Performance Monitor, and customize the System Monitor view.
Answer: I
Q275. - (Topic 3)
You have a computer named Computer1 that runs Windows 7. Computer1 has Remote Desktop enabled. Computer1 has a shared printer named Printer1.
A group named HRUsers is a member of the Remote Desktop Users group. Only HRUsers has access to Printer1. A user named User1 is a member of HRUsers.
You need to configure the computer to meet the following requirements:
Allow User1 to print to Printer1 Prevent User1 from establishing Remote Desktop sessions to Computer1 Allow other members of HRUsers to connect to Computer1 by using Remote Desktop
What should you do?
A. Remove User1 from the HRUsers group.
B. Remove HRUsers from the Remote Desktop Users group.
C. Assign User1 the Deny log on through Remote Desktop Services user right.
D. Assign User1 the Deny access to this computer from the network user right. Assign HRUsers the Allow log on locally user right.
Answer: C
Q276. - (Topic 6)
You have a computer joined to a domain that runs Windows 7. Your company network contains a Windows Server 2008 R2 remote access server. The server is configured as a Network Access Protection (NAP) enforcement point. You set the startup type of the NAP Agent service to Automatic on the computer.
You need to complete the configuration of the computer as a NAP client.
What should you do?
A. From the NAP Client Configuration console, configure the user interface settings.
B. From the command line of the computer, enable the DHCP Quarantine Enforcement Client by using the netsh command.
C. From the NAP Client Configuration console, enable the DHCP Quarantine Enforcement Client.
D. From the NAP Client Configuration console, configure the Health Registration settings.
Answer: B
Q277. HOTSPOT - (Topic 4)
You administer a computer that has Windows 7 Enterprise installed.
The computer has an application that must run by using administrative permission.
A user who has a standard user account connects to the computer by using a Remote Desktop connection. The user right-clicks the application shortcut, but the run as administrator option is unavailable.
You need to ensure that the user is able to run the application by using administrative permissions.
Which services should you configure? (To answer, select the appropriate option or options in the answer area).
Answer:
Q278. - (Topic 1)
In which of the following scenarios must you perform a migration rather than an upgrade? Choose three.
A. Windows XP Professional (x64) to Windows 7 Professional (x64)
B. Windows Vista Business (x86) to Windows 7 Professional (x64)
C. Windows Vista Enterprise (x64) to Windows 7 Enterprise (x64)
D. Windows Vista Home Premium (x64) to Windows 7 Home Premium (x86)
Answer: A,B,D
Q279. - (Topic 4)
A company has a server running Windows Server 2008 R2, with Windows Deployment Services (WDS), the Microsoft Deployment Toolkit (MDT), and the Windows Automated Installation Kit (WAIK) set up. The company also has client computers running Windows 7 Enterprise.
You need to capture an image of a client computer.
What should you do on the server before performing actions on the client computer?
A. Use Sysprep with an answer file and set the UpdatelnstalledDrivers option in the answer file to Mo.
B. Run the DiskPart command and the Attach command option.
C. Use Sysprep with an answer file and set the PersistAHDevicelnstalls option in the answer file to False.
D. Use Sysprep with an answer file and set the UpdatelnstalledDrivers option in the answer file to Yes.
E. Add a boot image and create a capture image in WDS.
F. Run the BCDEdit /delete command.
G. Run the Dism command with the /Add-Driver option.
H. Run the ImageX command with the /Mount parameter.
I. Run the Dism command with the /Add-Package option.
J. Use Sysprep with an answer file and set the PersistAHDevicelnstalls option in the answer file to True.
K. Run the Start/w ocsetup command.
L. Run the Dism command with the /Mount-Wim option.
M. Run the PEImg /Prep command.
Answer: E
Q280. - (Topic 6)
You have a computer that runs Windows 7. The computer is a member of a workgroup.
You use Encrypting File System (EFS) to protect your local files.
You need to ensure that you can decrypt EFS files on the computer if you forget your password.
What should you do?
A. From User Accounts, select Manage your file encryption certificates.
B. From Credential Manager, select Back up vault.
C. From BitLocker Drive Encryption, select Manage BitLocker and Turn On BitLocker.
D. From Authorization Manager, modify the Authorization Manager options.
Answer: A
Explanation: Make sure you have a backup of the appropriate encryption certificates