getcertified4sure.com

How to win with mcts 70 680




Pinpoint of exam 70 680 testing engine materials and testing material for Microsoft certification for IT professionals, Real Success Guaranteed with Updated 70 680 exam pdf dumps vce Materials. 100% PASS TS:Windows 7,Configuring exam Today!

Q171. - (Topic 2) 

You are deploying a custom Windows 7 system image to a new computer. 

You perform the following tasks: 

. Start the new computer by using the Windows Preinstallation Environment (Windows PE) 

. Connect to a shared network location that contains the Windows 7 image file 

You need to apply the Windows 7 image to the computer. 

What should you do before you apply the image? 

A. Mount the image. 

B. Configure Windows Firewall. 

C. Configure and format the hard disk drive. 

D. Initialize the Boot Configuration Data (BCD) store. 

Answer:

Explanation: 

Deploying from a Network Share After you have imaged your reference installation, you can deploy the image onto new hardware (one or more destination computers). To access a network share as an installation source from the client computer, you need to boot the client computer into the Windows Preintallation Environment (Windows PE) environment. The Windows PE environment is a minimally featured operating system that allows you to access diagnostic and maintenance tools as well as access network drives. To deploy an image from a network share, you use the Diskpart tool to format the hard drive of a destination computer . Then you copy the image from the network share and begin the installation by running Setup.exe. 


Q172. - (Topic 4) 

A company has a server running Windows Server2008 R2 with Windows Deployment Services (WDS), the Microsoft Deployment Toolkit (MDT), and the Windows Automated Installation Kit (WAIK) set up. The company also has client computers running Windows 7 Enterprise. 

A new driver is released for the network cards that are installed in the client computers. 

You need to update the image with the new driver for the network cards. 

What should you do to add the driver to the mounted Windows image file? 

A. Run the Start /w ocsetup command. 

B. Run the DiskPart command and the Attach command option. 

C. Use Sysprep with an answer file and set the PersistAHDeviceInstalls option in the answer file to True. 

D. Use Sysprep with an answer file and set the PersistAHDeviceInstalls option in the answer file to False. 

E. Use Sysprep with an answer file and set the UpdateInstalledDrivers option in the answer file to Yes. 

F. Run the Dism command with the /Mount-Wim option. 

G. Use Sysprep with an answer file and set the UpdateInstalledDrivers option in the answer file to No. 

H. Run the PEImg /Prepcommand. 

I. Run the ImageX command with the /Mountparameter. 

J. Add a boot image and create a capture image in WDS. 

K. Run the Dism command with the/Add-Driver option. 

L. Run the BCDEdit /delete command. 

M. Run the Dism command with the /Add-Package option. 

Answer:


Q173. - (Topic 3) 

You work as a desktop support technician at Abc.com. The Abc.com network consists of a single Active Directory domain named Abc.com. You are responsible for maintaining Abc.com's Windows 7 workstations. 

You want to configure all Windows 7 workstations to produce a new Security ID (SID) as well as a Welcome screen when the workstation is booted. 

What should you do? 

A. You should consider running Msconfig.exe /oobe /generalize startup on all Windows 7 workstations. 

B. You should consider running Sysprep.exe /audit /generalize on all Windows 7 workstations. 

C. You should consider running bootcfg.exe on all Windows 7 workstations. 

D. You should consider running Sysprep.exe /oobe /generalize on all Windows 7 workstations. 

Answer:


Q174. - (Topic 3) 

You have a computer named Computer1 that runs Windows 7. 

Computer1 has a shared printer. 

You need to configure Computer1 so that only Administrators are authorized to shut down the computer. 

What should you do? 

A. From User Accounts, modify the user profiles settings. 

B. From User Accounts, modify the User Account Control (UAC) settings. 

C. From the local computer policy, modify the Security Options. 

D. From the local computer policy, modify the User Rights Assignment. 

Answer:

Explanation: 

Shut down the system Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment Description Determines which users logged on locally to the computer can shut down the operating system using the Shut Down command. This user right is defined in the Default Domain Controller Group Policy object (GPO) and in the local security policy of workstations and servers. 


Q175. - (Topic 3) 

You have a computer that runs Windows 7. 

You have a system image backup of the computer. 

You install a new application that is configured to run as a service. 

You restart the computer and receive a STOP error message. 

You need to successfully start Windows 7 in the minimum amount of time. 

What should you do? 

A. Start the computer from the Windows 7 installation media and select Startup Repair. 

B. Start the computer and select Last Known Good Configuration from the advanced startup options. 

C. Start the computer and select Safe Mode from the advanced startup options. Restore a restore point. 

D. Start the computer and select Safe Mode from the advanced startup options. Restore the system image. 

Answer:

Explanation: 

Last Known Good Configuration (Advanced) ) feature in Advanced Boot Options is a recovery option that you use to start your computer with the most recent settings that worked. Last Known Good Configuration (Advanced) restores registry information and driver settings that were in effect the last time the computer started successfully. You should use the Last Known Good Configuration (Advanced) feature when you cannot start Windows 7 after you make a change to your computer, or when you suspect that a change that you just made is causing a problem, for example, if you cannot start Windows after you install a new video driver. When you start your computer by using the Last Known Good Configuration (Advanced) feature, Windows 7 uses the configuration stored in the following registry key: HKEY_LOCAL_MACHINE\System\CurrentControlSetXX (where by XX are numbers starting with 01 and rising in number to 02, 03, 04 and so on). This is the registry key that is used to store the configuration settings for the Drivers and Services on the system. Each time you boot the system, Windows will be assisted booting by using the registry key "HKEY_LOCAL_MACHINE\System\CurrentControlSet" which will point to another control set key, normally HKEY_LOCAL_MACHINE\System\CurrentControlSet01, (depending on how the system is configured) which contains the setting for the current boot process. Each time Windows boots there will also be a values created under the "HKEY_LOCAL_MACHINE\System\CurrentControlSet\Select" key. These contain REG_DWORD data that enable the Control Keys to operate the way they are designed to. These values tell the CurrentControlSet key which numbered CurrentControlSet to point to enable Windows to boot successfully. The data that tells Last Good Known Configuration which numbered CurrentControlSet to load is also stored under these values. They also contain the data that tells Windows which CurrentContolSet not to use, as there is information stored that lets Windows know what CurrentControlSet has failed to load when Windows was unable to boot. 

The Last Known Good Configuration CurrentControlSet will change each time the system configuration for the control set changes. This means that each time you install or uninstall a driver or service, a new numbered CurrentControlSet will be created and stored. If you alter the system, and it is then unable to boot, the Last Known Good Configuration will point to the CurrentControlSet that was last used in a successful boot. 

This happens each time that Windows boots and there should typically be only four control sets, although it is not uncommon to have five or six of these Control Sets contained in the registry. Windows will keep track of how many Control Sets are stored and should clear old ones once a certain amount is reached. 

If installing a new program or device should render the system unbootable, you may be able to use "Last Known Good Configuration" to restore the damaged Control Set registry key with an earlier key that enabled the system to boot. This will remove the registry key(s) that relates to the problem driver or service. It will not remove the actual driver or service but will render it unusable. This could result in any program or device the was installed after the last boot having to be re-installed as their configuration setting will have been over written. When you perform a system restore following a normal boot or following a boot that uses the Last Known Good Configuration (Advanced) option, a restore point is created that enables you to undo the changes if they do not fix your problem. However, if you perform a system restore when the computer is in Safe Mode or by using the System Recovery options, you cannot undo the restore operation. In this case, if your problem is not resolved, you can run another system restore and choose a different restore point. 


Q176. - (Topic 1) 

You plan to install Windows 7 by using a Windows 7 DVD. You need to perform an automated installation of Windows 7. What should you do? 

A. Create an answer file named oobe.xml. Copy the file to a network share. 

B. Create an answer file named winnt.sif. Place the file on a removable drive. 

C. Create an answer file named sysprep.inf. Copy the file to a network share. 

D. Create an answer file named autounattend.xml. Place the file on a removable drive. 

Answer:


Q177. - (Topic 1) 

You are configuring static IPv4 addresses for two computers, Perth and Brisbane, on an isolated private wired subnet. You configure Perth with the IPv4 address 172.16.10. 140 and the subnet mask 255.255.255.0. You configure Brisbane with the IPv4 address 172.16.10. 210 and the subnet mask 255.255.255.0. You enter ping 172.16.10.140 on Brisbane, but the command times out. Similarly, entering ping 172.16.10.210 on Perth fails to locate the Brisbane computer's IPv4 address. What is the likely reason for this lack of connectivity? 

A. DNS service is not available on the subnet. 

B. The computers should have different subnet masks. 

C. You have not specified a default gateway. 

D. You need to permit ICMPv4 traffic through the firewalls of both computers. 

Answer:


Q178. - (Topic 2) 

You want to centralize backups by backing up all client computers in your company's production network to a network share on a file server running Windows Server 2008 R2. All your client computers run Windows 7, but because your company has grown through a series of mergers, some run Windows 7 Professional, some run Windows 7 Enterprise, and some run Windows 7 Ultimate. 

Which computers can you back up to a network share? 

A. Only the computers running Windows 7 Ultimate 

B. Only the computers running Windows 7 Enterprise 

C. Only the computers running either Windows 7 Ultimate or Windows 7 Enterprise 

D. All your company's client computers 

Answer:


Q179. - (Topic 2) 

You work as the desktop support technician. The network consists of a single Active Directory domain named CK.com. 

You need to perform a clean installation of Microsoft Windows 7 Professional on the workstations in the Research department. 

All workstations in the Research department have identical hardware as listed below: 

1.2 GHz Dual-Core processor. 

1024 MB of RAM. 

20 GB hard drive. 

DirectX 10 video display card. 

Integrated sound card. 

10/100 integrated network adapter. 

You need to ensure that the workstations able to support Windows 7 and are able to support Windows XP mode. 

What should you do? (Each correct answer presents part of the solution. Choose two.) 

A. You should upgrade the processor. 

B. You should upgrade the RAM. 

C. You should upgrade the video card. 

D. You should upgrade the hard drive. 

E. You should upgrade the network adapter. 

Answer: B,D 


Q180. DRAG DROP - (Topic 6) 

You manage the Windows 7 Professional computers for a small architecture firm. All computers operate in workgroup mode. 

The lead engineer asks you to enable employees to share CAD files located on their desktop computers with all of the other members of the firm. 

You create a HomeGroup on the lead engineer's computer. 

You need to configure the rest of the computers in the firm to join this HomeGroup. 

Which four actions should you perform in sequence? (To answer, move the appropriate four actions from the list of actions to the answer area and arrange them in the correct order. 1) 

Answer: