Testking launch for ?¡ãa whole refund?¡À dedication. If you opt for each of our 70-680 audit, failed to successfully pass the first testing, while using take care of or maybe VUE analyze centres have PROMETRIC Close up testing survey minute card, we can reclaim the full price of you buy the car audit, the total promise that interests will never be every loss in. Testking 70-680 review products are definitely the excellent mix off the brand, insurance policy coverage for 96% or over.
Q331. DRAG DROP - (Topic 5)
Windows 7 client computers in your company network are assigned IP addresses manually or by using DHCP.
Recent changes have been made to a DHCP Server scope. Desktops that have manually assigned IP addresses are reporting that they can no longer connect to the Internet.
You need to ensure that all client computers receive IP address and DNS servers' addresses from the DHCP server.
Which commands should you run? (To answer, move the appropriate commands from the list of commands to the answer area and arrange them in the correct order.)
Answer:
Q332. - (Topic 4)
You have a portable computer that runs Windows 7. The computer is configured to keep an offline version of files located in a network share.
You need to identify whether you are working on an offline version of a file.
What should you do?
A. From Sync Center, click View sync partnerships.
B. From Action Center, click View archived messages.
C. From Windows Explorer, select the file and then view the toolbar.
D. From Windows Mobile Device Center, click the Connection settings.
Answer: C
Explanation:
To find out whether you're working offline: Offline files turn on automatically if you lose your network connection. A copy of your file is copied to your computer, and once your network connection is re-established, the two copies will be synchronized. To find out if you're working offline, do the following.
1. Open the network folder that contains the file you are working on.
2. Check the Details pane at the bottom of the window for the status. If the status is offline, you are working with a copy of the file on your computer. If the status in online, you are working with the file on the network.
Q333. - (Topic 2)
You have a computer that runs Windows Vista.
You need to identify whether the computer can be upgraded to Windows 7.
Which tool should you use?
A. Windows Anytime Upgrade for Windows 7
B. Windows Anytime Upgrade for Windows Vista
C. Windows 7 Upgrade Advisor
D. Windows Vista Upgrade Advisor
Answer: C
Explanation:
Windows 7 Upgrade Advisor Prior to attempting to perform the upgrade from Windows Vista to Windows 7, you should run the Windows 7 Upgrade Advisor. The Windows 7 Upgrade Advisor is an application that you can download from Microsoft's\ Web site that will inform you if Windows 7 supports a computer running the current hardware and software configuration of Windows Vista. Prior to running the Windows 7 Upgrade Advisor, you should ensure that all hardware that you want to use with Windows 7, such as printers, scanners, and cameras, are connected to the computer. The Upgrade Advisor generates a report that informs you of which applications and devices are known to have problems with Windows 7. NOT Windows Anytime Upgrade A similar compatability report is generated during the upgrade process, but the version created by the Windows 7 Upgrade Advisor is more likely to be up to date.NOT VistaQuestion specifies upgrading to Windows 7 from Windows Vista, not upgrading to Windows Vista.
Q334. - (Topic 1)
You have a new computer that does not have an operating system installed. You have a virtual hard disk (VHD) that contains an installation of Windows 7. You start the computer from the Windows Preinstallation Environment (Windows PE). You create a partition on the computer and copy the VHD to the partition.
You need to configure the computer to start from the VHD.
Which tools should you use?
A. Diskpart.exe and Bcdboot.exe
B. Imagex.exe and Bcdedit.exe
C. Scanstate.exe and Loadstate.exe
D. Wpeutil.exe and Dism.exe
Answer: A
Explanation: Diskpart Microsoft command-line tool Diskpart is used to create and format volumes on the target computer.Bcdboot You now want to apply this customized image to the hard disks of two new computers you have purchased without operating systems. You boot each computer in turn from the Windows PE media and use ImageX to install the image. Your final step, to make the image bootable, is to use BCDboot from Windows PE to initialize the BCD store and copy boot environment files to the system partition. When you reboot each new computer, it will boot into Windows 7 and will have the same settings configured and applications installed as your original computer. Take care you are not violating any licensing conditions.
Q335. DRAG DROP - (Topic 6)
An employee has a Windows Vista SP1 32-bit computer that uses legacy devices. You need to upgrade the computer to Windows 7 32-bit based on the following
requirements:
. Ensure application and third-party hardware compatibility.
. Preserve existing applications, settings, and documents.
Which three actions should you perform in sequence? (To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order. )
Answer:
Q336. HOTSPOT - (Topic 6)
A manufacturing company has Windows Vista and Windows XP computers.
You are responsible for upgrading all computers to Windows 7.
You test the Windows 7 installation on a Windows Vista computer. Early in the installation
process, you are prompted to choose the "Upgrade" option or the "Custom (Advanced)" installation option.
You need to determine which installation option is appropriate for the different computers in your company.
In the table below, identify the characteristics of the Upgrade and Custom installation options. (Make only one selection in each column. This question is worth two points. )
Answer:
Q337. - (Topic 5)
You are evaluating the purchase a netbook computer that has the following hardware:
1.6-gigahertz (GHz) 32-bit processor
1024-MB RAM
1 video card that uses shared memory
. 4-G8 solid state drive
You need to ensure that you can install Windows 7 Enterprise on the netbook computer. Which hardware component should you change or add?
A. storage device
B. video card
C. processor
D. ram
Answer: A
Q338. - (Topic 4)
A company has a server running Windows Server 2008 R2, with Windows Deployment Services (WDS), the Microsoft Deployment Toolkit (MDT), and the Windows Automated Installation Kit (WAIK) set up. The company also has client computers running Windows 7 Enterprise.
You need to capture an image of a client computer.
What should you do on the server before performing actions on the client computer?
A. Use Sysprep with an answer file and set the UpdatelnstalledDrivers option in the answer file to Mo.
B. Run the DiskPart command and the Attach command option.
C. Use Sysprep with an answer file and set the PersistAHDevicelnstalls option in the answer file to False.
D. Use Sysprep with an answer file and set the UpdatelnstalledDrivers option in the answer file to Yes.
E. Add a boot image and create a capture image in WDS.
F. Run the BCDEdit /delete command.
G. Run the Dism command with the /Add-Driver option.
H. Run the ImageX command with the /Mount parameter.
I. Run the Dism command with the /Add-Package option.
J. Use Sysprep with an answer file and set the PersistAHDevicelnstalls option in the answer file to True.
K. Run the Start/w ocsetup command.
L. Run the Dism command with the /Mount-Wim option.
M. Run the PEImg /Prep command.
Answer: E
Q339. DRAG DROP - (Topic 6)
A company has client computers that run Windows Vista.
You need to install Windows 7 on a client computer in a dual-boot configuration with the existing Windows Vista installation, without reducing the size of the partition that contains Windows Vista.
Which actions should you perform in sequence?
(To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)
Answer:
Q340. - (Topic 1)
You have a computer that runs Windows Vista. The computer contains a custom application.
You need to export the user state and the settings of the custom application.
What should you do?
A. Run Loadstate.exe and specify the /config parameter.
B. Run Scanstate.exe and specify the /genconfig parameter.
C. Modify the miguser.xml file. Run Loadstate.exe and specify the /ui parameter.
D. Modify the migapp.xml file. Run Scanstate.exe and specify the /i parameter.
Answer: D
Explanation:
MigApp.xml This file contains rules about migrating application settings. These include Accessibility settings, dial-up connections, favorites, folder options, fonts, group membership, Open Database Connectivity (ODBC) settings, Microsoft Office Outlook Express mailbox files, mouse and keyboard settings, phone and modem options, Remote Access Service (RAS) connection phone book files, regional options, remote access, screensaver settings, taskbar settings, and wallpaper settings.(Include) /i:[Path\]FileName Specifies an .xml file that contains rules that define what user, application or system state to migrate. You can specify this option multiple times to include all of your .xml files (MigApp.xml, MigUser.xml and any custom .xml files that you create). Path can be either a relative or full path. If you do not specify the Path variable, then FileName must be located in the current directory.NOT MigUser.xmlMigUser.xml This file contains rules about user profiles and user data. The default settings for this file migrate all data in My Documents, My Video, My Music, My Pictures, desktop files, Start Menu, Quick Launch settings, favorites, Shared Documents, Shared Video, Shared Music, Shared desktop files, Shared Pictures, Shared Start menu, and Shared Favorites. This file also contains rules that ensure that all the following file types are migrated from fixed volumes: .qdf, .qsd, .qel, .qph, .doc, .dot, .rtf, .mcw, .wps, .scd, .wri, .wpd, .xl*, .csv, .iqy, . dqy, .oqy, .rqy, .wk*, .wq1, .slk, .dif, .ppt*, .pps*, .pot*, .sh3, .ch3, .pre, .ppa, .txt, .pst, .one*, .mpp, .vsd, .vl*, .or6, .accdb, .mdb, .pub, .xla, .xlb and .xls. The asterisk ( *) represents zero or more characters.