70-410 Exam
All About 70-410 latest exam Mar 2021
Exam Code: 70-410 (Practice Exam Latest Test Questions VCE PDF)
Exam Name: Installing and Configuring Windows Server 2012
Certification Provider: Microsoft
Free Today! Guaranteed Training- Pass 70-410 Exam.
2021 Mar 70-410 exam cost
Q171. - (Topic 3)
Your network contains an Active Directory domain named contoso.com.
You have a starter Group Policy object (GPO) named GPO1 that contains more than 100
settings.
You need to create a new starter GPO based on the settings in GPO1.
You must achieve this goal by using the minimum amount of administrative effort.
What should you do?
A. Run the New-GPStarterGPO cmdlet and the Copy-GPO cmdlet.
B. Create a new starter GPO and manually configure the policy settings of the starter GPO.
C. Right-click GPO1, and then click Back Up. Create a new starter GPO. Right-click the new GPO, and then click Restore from Backup.
D. Right-click GPO1, and then click Copy. Right-click Starter GPOs, and then click Paste.
Answer: B
Explanation:
Although GPOs and Starter GPOs can both be copied, and a Starter GPO can be used to create a new GPO (as that is their purpose), an existing GPO cannot be copied to a new Starter GPO (unfortunately).
Q172. - (Topic 3)
You have a server named Server1 that runs Windows Server 2012 R2.
You need to remove Windows Explorer, Windows Internet Explorer, and all related components and files from Server1.
What should you run on Server1?
A. Uninstall-WindowsFeature Server-Gui-Mgmt-Infra Remove
B. Uninstall-WindowsFeature Server-Gui-Shell Remove
C. msiexec.exe /uninstall iexplore.exe /x
D. msiexec.exe /uninstall explorer.exe /x
Answer: B
Explanation:
A. Would be a server core install
B. No IE or taskbar, explorer or control panel
C. Would leave components
D. Would leave components In Windows Server 2012 R2, you can remove the Server Graphical Shell, resulting in the “Minimal ServerInterface”. This is similar to a Server with a GUI installation, but Internet Explorer 10, Windows Explorer, the desktop, and the Start screen are not installed. Microsoft Management Console (MMC), Server Manager, and a subset of Control Panel are still present. If the server has a full installation of Windows Server, and I need to bring the server down to minimal server interface, I only need to remove the Server-GUI-Shell.
Q173. - (Topic 3)
Your network contains an Active Directory domain named contoso.com.
All user accounts in the marketing department reside in an organizational unit (OU) named OU1.
You have a Group Policy object (GPO) named GPO1. GPO1 contains Folder Redirection settings. GPO1 has default permissions.
You discover that the Folder Redirection settings are not applied to the users in the marketing department.
You open Group Policy Management as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that the Folder Redirection settings in GPO1 apply to the marketing users.
What should you do?
A. Modify the Delegation settings of GPO1.
B. Enable the link of GPO1.
C. Enforce GPO1.
D. Modify the link order of GPO1.
Answer: C
Q174. - (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains an Application server named Server1. Server1 runs Windows Server 2012 R2.
Server1 is configured as an FTP server.
Client computers use an FTP Application named App1.exe. App1.exe uses TCP port 21 as
the control port and dynamically requests a data port.
On Server1, you create a firewall rule to allow connections on TCP port 21. You need to configure Server1 to support the client connections from App1.exe. What should you do?
A. Run netshadvfirewall set global statefulftp enable.
B. Create an inbound firewall rule to allow App1.exe.
C. Create a tunnel connection security rule.
D. Run Set-NetFirewallRule -DisplayName DynamicFTP -Profile Domain
Answer: A
Explanation:
The netsh firewall context is supplied only for backward compatibility. We recommend that you do not use this context on a computer that is running Windows Vista or a later version of Windows. In the netsh advfirewall firewall context, the add command only has one variation, the add rule command. Netsh advfirewall set global statefulftp: Configures how Windows Firewall with Advanced Security handles FTP traffic that uses an initial connection on one port to request a data connection on a different port. When statefulftp is enabled, the firewall examines the PORT and PASV requests for these other port numbers and then allows the corresponding data connection to the port number that was requested. Syntax set global statefulftp { enable | disable | notconfigured } Parameters statefulftp can be set to one of the following values: enable The firewall tracks the port numbers specified in PORT command requests and in the responses to PASV requests, and then allows the incoming FTP data traffic entering on the requested port number. disable This is the default value. The firewall does not track outgoing PORT commands or PASV responses, and so incoming data connections on the PORT or PASV requested port is blocked as an unsolicited incoming connection. notconfigured Valid only when netsh is configuring a GPO by using the set store command.
Q175. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named HVServer1. HVServer1 runs Windows Server 2012 and has the Hyper-V server role installed. HVServer1 hosts 10 virtual machines. All of the virtual machines connect to a virtual switch named Switch1. Switch1 is configured as a private network. All of the virtual machines have the DHCP guard and the router guard settings enabled.
You install the DHCP server role on a virtual machine named Server 1. You authorize Server1 as a DHCP server in contoso.com. You create an IP scope.
You discover that the virtual machines connected to Switch1 do not receive IP settings from Server1.
You need to ensure that the virtual machines can use Server1 as a DHCP server.
What should you do?
A. Enable MAC address spoofing on Server1.
B. Disable the DHCP guard on all of the virtual machines that are DHCP clients.
C. Disable the DHCP guard on Server1.
D. Enable single-root I/O virtualization (SR-IOV) on Server1.
Answer: C
Explanation:
Private virtual networks are used where you want to allow communications between virtual machine to virtual machine on the same physical server in a block diagram, a private network is an internal network without a virtual NIC in the parent partition. A private network would commonly be used where you need complete isolation of virtual machines from external and parent partition traffic. DMZ workloads running on a leg of a trihomed firewall, or an isolated test domain are examples where this type of network may be useful.
Renovate 70-410 practice exam:
Q176. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2 that run Windows Server 2012 R2. You log on to Server1. You need to retrieve the IP configurations of Server2. Which command should you run from Server1?
A. winrs -r:server2 ipconfig
B. winrm get server2
C. dsquery *-scope base-attr ip, server2
D. ipconfig > server2.ip
Answer: A
Q177. - (Topic 2)
You have two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 and Server2 are part of a workgroup.
On Server1, you add Server2 to Server Manager.
When you attempt to connect to Server2 from Server Manager, you receive the following error message: "Credentials not valid."
You need to ensure that you can manage Server2 from Server1 by using Server Manager on Server1.
What should you do?
A. On Server 2, run the Configure-SmRemoting cmdlet.
B. On Server 1, run the Set-NetFirewallRule cmdlet.
C. On Server 1, run the Set-Item cmdlet.
D. On Server 2, install the Remote Server Administration Tools (RSAT).
Answer: C
Explanation:
Since they are both workgroup members, server 2 will have to be added to server 1 as a trusted host
Q178. DRAG DROP - (Topic 1)
You are configuring a multi-subnet IPv6 network for a regional office.
The corporate network administrator allocates the 2001:0db8:1234:0800: :/54 address space for your use.
You need to identify network IDs of the first and last subnets that you will be able to create at the office.
Which network IDs should you identify?
To answer, drag the appropriate network IDs to the correct subnets. Each network ID may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Q179. - (Topic 1)
You have a server named Server1 that runs Windows Server 2012 R2. You need to create a script that will create and mount a virtual hard disk. Which tool should you use?
A. diskpart.exe
B. vdsldr.exe
C. fsutil.exe
D. vds.exe
Answer: A
Q180. - (Topic 3)
Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. You need to install the Remote Desktop Services server role on Server2 remotely from Server1. Which tool should you use?
A. The dsadd.exe command
B. The Server Manager console
C. The Remote Desktop Gateway Manager console
D. The Install-RemoteAccess cmdlet
Answer: B