70-410 Exam
How to pass exam 70-410 installing and configuring windows server 2012 lab manual in Sep 2021
Pass4sure offers the most competitive Microsoft 70-410 exam training materials for the candidates. Almost all of them get passed the actual real test in the first attempt some of them got an over 95% indicate. As the end result, they got a top-flight job within the competitive IT area. If you want to be one of all of them, please join in our instruction team and you will do well soon. The high passing ratio is the best proof for each of our hard function. You can eliminate your worries. We all guarantee your own achievement on the first attempt. And you can check the top quality of each of our Microsoft Microsoft exam and then create your decision whether or perhaps not to acquire.
2021 Sep exam ref 70-410 installing and configuring windows server 2012 pdf:
Q231. - (Topic 3)
You have a server named Server1. Server1 runs a Server Core installation of Windows
Server 2012 R2. The local area connection on Server1 has the following configuration:
IP address: 10.1.1.1
Subnet mask: 255.255.240.0
Default gateway: 10.1.1.254
Preferred DNS server: <none>
The network contains a DNS server that has an IPv4 address of 10.1.1.200. You need to configure Server1 to use 10.1.1.200 as the preferred DNS server. The solution must not change any other settings on Server1.
Which command should you run?
A. sconfig.cmd
B. net.exe
C. Set-NetIPInterface
D. netsh.exe
Answer: A
Explanation:
In Windows Server 2012 R2, you can use the Server Configuration tool (Sconfig.cmd) to configure and manage several common aspects of Server Core installations. Network settings You can configure the IP address to be assigned automatically by a DHCP Server or you can assign a static IP address manually. This option allows you to configure DNS Server settings for the server as well.
Q232. - (Topic 3)
Your network contains an active directory domain named contoso.com. The domain consists 20
member Servers and 5 domain controllers. All servers run Windows Server 2012 R2. The domain contains 500 client computers.
You plan to deploy a domain controller for contoso.com in Microsoft Azure.
You need to prepare the conversation for planned deployment. The solution should ensure that the domain controller hosted in Azure always have the same IP address.
Witch two actions should you perform? Each correct answer is a part of the solution.
A. From an Azure virtual machine run the Set-AzureStaticVNetIP cmdlet
B. Deploy a Side by side virtual private network (VPN)
C. From Azure virtual machine run the Set –NetIPAuthentication cmdlet
D. From an domain controller run the Set-NetIPAdresses cmdlet
E. From an domain controller run adprep.exe
Answer: A
Explanation:
Set the static VNet IP address information to a VM object.
Q233. DRAG DROP - (Topic 1)
You have a server named Server1 that runs Windows Server 2012 R2.
You need to perform the following storage configuration tasks on Server1:
Bring a disk named Disk1 online.
Defragment a volume named Volume1.
Remove a disk named Disk2 from a storage pool named Pool1.
Which cmdlet should you use to perform each task?
To answer, drag the appropriate cmdlets to the correct tasks. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Q234. - (Topic 2)
You have two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 and Server2 are part of a workgroup.
On Server1, you add Server2 to Server Manager.
When you attempt to connect to Server2 from Server Manager, you receive the following error message: "Credentials not valid."
You need to ensure that you can manage Server2 from Server1 by using Server Manager on Server1.
What should you do?
A. On Server 2, run the Configure-SmRemoting cmdlet.
B. On Server 1, run the Set-NetFirewallRule cmdlet.
C. On Server 1, run the Set-Item cmdlet.
D. On Server 2, install the Remote Server Administration Tools (RSAT).
Answer: C
Explanation:
Since they are both workgroup members, server 2 will have to be added to server 1 as a trusted host
Q235. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. All servers run either Windows Server 2008 R2 or Windows Serve 2012 R2. All client computers run either Windows 7 or Windows 8. The domain contains a member server named Server1 that runs Windows Server 2012 R2. Server1 has the File and Storage Services server role installed. On Server1, you create a share named Share1.
You need to ensure that users can use Previous Versions to restore the files in Share1.
What should you configure on Server1?
A. The Shadow Copies settings
B. A Windows Server Backup schedule
C. A data recovery agent
D. The Recycle Bin properties
Answer: A
Explanation:
A. Enable and schedule shadow copies for Share1
B. The backup doesn’t give users access until files are restored
D. No settings for file version
Down to date microsoft 70-410:
Q236. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed.
Contoso.com has a server, named ENSUREPASS-SR07, which has the ADDS, DHCP, and DNS server roles installed. Contoso.com also has a server, named ENSUREPASS-SR08, which has the DHCP, and Remote Access server roles installed. You have configured a server, which has the File and Storage Services server role installed, to automatically acquire an IP address. The server is named ENSUREPASSSR09.
You then create reservation on ENSUREPASS-SR07, and a filter on ENSUREPASS-SR08.
Which of the following is a reason for this configuration?
A. It allows ENSUREPASS-SR09 to acquire a constant IP address from ENSUREPASS-SR08 only.
B. It configures ENSUREPASS-SR09 with a static IP address.
C. It allows ENSUREPASS-SR09 to acquire a constant IP address from ENSUREPASS-SR07 and ENSUREPASSSR08.
D. It allows ENSUREPASS-SR09 to acquire a constant IP address from ENSUREPASS-SR07 only.
Answer: D
Explanation:
To configure the Deny filter In the DHCP console tree of DHCP Server 1, under IPv4, click Filters, right-click Deny under Filters, and then click New Filter. In the New Deny Filter dialog box, in MAC Address, enter a six hexadecimal number representing the MAC or physical address of DHCP Client 2, click Add, and then click Close. Under Filters right-click the Deny node, and then click the Enable pop-up menu item.
Q237. - (Topic 3)
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 has 8 GB of RAM.
Server1 hosts five virtual machines that run Windows Server 2012 R2.
The settings of a virtual machine named Server3 are configured as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that when Server1 restarts, Server3 automatically resumes without intervention. The solution must prevent data loss.
Which settings should you modify?
A. BIOS
B. Automatic Start Action
C. Automatic Stop Action
D. Integration Services
Answer: C
Explanation:
The Automatic Stop Action setting should be modified because it will allow you to configure: “Save the virtual machine state” option instructs Hyper-V Virtual Machine Management Service to save the virtual machine state on the local disk when the Hyper-V Server shuts down. OR “Turn Off the virtual machine” is used by the Hyper-V Management Service (VMMS.exe) to gracefully turn off the virtual machine. OR “Shut down the guest operating system” is successful only if the “Hyper-V Shutdown” guest service is running in the virtual machine. The guest service is required to be running in the virtual machine as the Hyper-V VMMS.EXE process will trigger Windows Exit message which is received by the service. Once the message is received by the guest service, it takes the necessary actions to shut down the virtual machine.
: http://www.altaro.com/hyper-v/hyper-v-automatic-start-and-stop-action/
Q238. - (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain
contains a domain controller named Server1 that runs Windows Server 2012 R2.
On Server1, you create a work folder named Work1.
A user named User1 connects to Work1 from a computer named Computer1.
You need to identify the last time the documents in Work1 were synchronized successfully
from Computer1.
What should you do?
A. From Server Manager, review the properties of Computer1.
B. From Windows PowerShell, run the Get-SyncUserSettingscmdlet.
C. From Windows PowerShell, run the Get-SyncSharecmdlet.
D. From Server Manager, review the properties of User1.
Answer: D
Q239. DRAG DROP - (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Server1 and Server2 run a Server with a GUI installation of Windows Server 2012 R2.
You remove the Graphical Management Tools and Infrastructure feature on Server2.
You need to restart Server2.
What should you do? (To answer, drag the appropriate tools to the correct statements. Each tool may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.)
Answer:
Q240. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains a print server named Server1 that runs Windows Server 2012 R2. Server1 contains a local group named Group1.
You share a printer named Printer1 on Server1.
You need to configure Printer1 to meet the following requirements:
. Ensure that the members of Group1, the Server Operators group, the Administrators group, and the Print Operators group can send print jobs to Printer1.
. Prevent other users from sending print jobs to Printer1.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Remove the permissions for the Creator Owner group.
B. Assign the Print permission to the Administrators group.
C. Remove the permissions for the Everyone group.
D. Assign the Print permission to the Server Operators group.
E. Assign the Print permission to Group1.
Answer: C,E
Explanation:
C. To prevent other users from sending print jobs to Printer1
E. To enable Group1 to send print jobs.
Note: The Server Operators group, the Administrators group, and the Print Operators group
are all built-in and already have permissions to send print jobs.