70-410 Exam
Super ways to 70 410 study guide pdf
we provide 100% Guarantee Microsoft exam 70 410 pdf test preparation which are the best for clearing 70 410 exam dumps test, and to get certified by Microsoft Installing and Configuring Windows Server 2012. The 70 410 exam Questions & Answers covers all the knowledge points of the real exam collections 70 410 exam. Crack your Microsoft braindumps 70 410 Exam with latest dumps, guaranteed!
Q191. - (Topic 2)
You have a server named Server1 that runs Windows Server 2012 R2. You add a 4-TB disk named Disk 5 to Server1.
You need to ensure that you can create a 3-TB volume on Disk 5.
What should you do?
A. Create a storage pool.
B. Convert the disk to a dynamic disk
C. Create a VHD, and then attach the VHD.
D. Convert the disk to a GPT disk.
Answer: D
Explanation:
MBR max is 2TB, the disk must be GPT For any hard drive over 2TB, we need to use GPT partition. If you have a disk larger than 2TB size, the rest of the disk space will not be used unless you convert it to GPT. An existing MBR partition can’t be converted to GPT unless it is completely empty; you must either delete everything and convert or create the partition as GPT. It is not possible to boot to a GPT partition, impossible to convert MBR to GPT without data loss.
Q192. - (Topic 1)
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012 R2.
The domain contains a user named User1 and a global security group named Group1.
User1 logs on to a client computer named Computer1.
You need to disable the computer account of Computer1.
Which cmdlet should you run?
A. Add-AdPrincipalGroupMember.hip
B. Install-AddsDomainController
C. Install WindowsFeature
D. Install AddsDomain
E. Roname-AdObject
F. Set-AdAccountControl
G. Set-AdGroup
H. Set-User
Answer: F
Explanation:
Set-ADAccountControl Enabled Specifies if an account is enabled. An enabled account requires a password. This parameter sets the Enabled property for an account object. This parameter also sets the ADS_UF_ACCOUNTDISABLE flag of the Active Directory User Account Control (UAC) attribute. Possible values for this parameter include: $false or 0 $true or 1 The following example shows how to set this parameter to enable the account. -Enabled $true
Q193. - (Topic 3)
Your network contains an Active Directory domain named adatum.com. The domain contains several thousand member servers that run Windows Server 2012 R2. All of the computer accounts for the member servers are in an organizational unit (OU) named ServersAccounts. Servers are restarted only occasionally.
You need to identify which servers were restarted during the last two days.
What should you do?
A. Run dsquery computer and specify the -stalepwd parameter
B. Run dsquery server and specify the -o parameter.
C. Run Get-ADComputer and specify the lastlogon property.
D. Run Get-ADComputer and specify the SearchScope parameter
Answer: C
Q194. HOTSPOT - (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Hyperv1 and a domain controller named DC1. Hyperv1 has the Hyper-V server role installed. DC1 is a virtual machine on Hyperv1.
Users report that the time on their client computer is incorrect.
You log on to DC1 and verify that the time services are configured correctly.
You need to prevent time conflicts between the time provided by DC1 and other potential
time sources.
What should you configure?
To answer, select the appropriate object in the answer area.
Answer:
Q195. - (Topic 3)
Your network contains an Active Directory domain named contoso.com.
You have a starter Group Policy object (GPO) named GPO1 that contains more than 100
settings.
You need to create a new starter GPO based on the settings in GPO1.
You must achieve this goal by using the minimum amount of administrative effort.
What should you do?
A. Run the New-GPStarterGPO cmdlet and the Copy-GPO cmdlet.
B. Create a new starter GPO and manually configure the policy settings of the starter GPO.
C. Right-click GPO1, and then click Back Up. Create a new starter GPO. Right-click the new GPO, and then click Restore from Backup.
D. Right-click GPO1, and then click Copy. Right-click Starter GPOs, and then click Paste.
Answer: B
Explanation:
Although GPOs and Starter GPOs can both be copied, and a Starter GPO can be used to create a new GPO (as that is their purpose), an existing GPO cannot be copied to a new Starter GPO (unfortunately).
Q196. - (Topic 3)
You have a server named Server1 that runs a Server Core installation of Windows Server 2012 R2 Standard. You establish a Remote Desktop session to Server1.
You need to identify which task can be performed on Server1 from within the Remote Desktop session.
What should you identify?
A. Install a feature by using Server Manager.
B. Modify the network settings by using Sconfig.
C. Disable services by using Msconfig.
D. Join a domain by using the System Properties.
Answer: B
Explanation:
In Windows Server 2012 R2, you can use the Server Configuration tool (Sconfig.cmd) to configure and manage several common aspects of Server Core installations. You must be a member of the Administrators group to use the tool. Sconfig.cmd is available in the Minimal Server Interface and in Server with a GUI mode.
References: http://technet.microsoft.com/en-us/library/jj647766.aspx Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 2: Deploying servers, p. 80
Q197. - (Topic 3)
You have a server named Server1. Server1 runs Windows Server 2012 R2 and has the File and Storage Services server role installed. You attach four 500-GB disks to Server1. You need to configure the storage to meet the following requirements:
. Storage for an application named Application1 must be provided. Application1 requires 20 GB and will require a maximum of 800 GB in three years. . Storage for an application named Application2 must be provided. Application2 requires 20 GB and will require a maximum of 900 GB in three years. . The solution must provide the ability to dynamically add storage without requiring configuration changes to the applications. . The storage must be available if a single disk fails.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. From File and Storage Services, create virtual disks by using fixed provisioning.
B. From File and Storage Services, create a storage pool that uses all four disks.
C. From Disk Management, create two new mirror volumes that use two disks each.
D. From Disk Management, create a new RAID-5 volume that uses all four disks.
E. From File and Storage Services, create virtual disks by using thin provisioning.
Answer: B,E
Q198. - (Topic 2)
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has following storage spaces:
....
Data
Users
Backups
Primordial
You add an additional hard disk to Server1.
You need to identify which storage space contains the new hard disk.
Which storage space contains the new disk?
A. Primordial
B. Data
C. Users
D. Backups
Answer: A
Explanation:
All storage that meets acceptable criteria for Storage Spaces will be placed in the Primordial Pool. This can be considered the default pool for devices from which any other pools will be created. Notice that there are no other virtual disks or pools at this point. The Primordial Pool will only consist of physical storage devices that do not belong to any other pools.
Q199. DRAG DROP - (Topic 1)
You plan to deploy a DHCP server that will support four subnets. The subnets will be configured as shown in the following table.
You need to identify which network ID you should use for each subnet.
What should you identify?
To answer, drag the appropriate network ID to the each subnet in the answer area.
Answer:
Q200. - (Topic 3)
Server 1 and Server2 host a load-balanced Application pool named AppPool1. You need to ensure thatAppPool1 uses a group Managed Service Account as its identity. Which 3 actions should you perform?
A. Install a domain controller that runs Windows Server 2012 R2, Run the New- ADService Accountcmdlet, Modify the settings of AppPool1.
B. Configure the Security settings of the contoso.com zone.
C. Add a second legacy network adapter, and then run the Set-VMNetwork Adoptercmdlet.
D. From Windows Powershell, run Get-DNS ServerDiagnostics.
Answer: A
Explanation:
For the application pool to use a group Managed Service account as its identity you will have to make sure that there is a domain controller where you can add the account and then modify the application pool accordingly. Thus you should use the New- ADService Account on the domain controller that will create a new Active Directory service account.