70-410 Exam
10 tips on microsoft exam 70-410
The particular examinees which read the Testking Microsoft 70-410 places tend to be achievement of very certified teachers, dwelling an excellent lifestyle. Testking continues to be dedicated to make your potential protected and begin the Microsoft 70-410 Installing and Configuring Windows Server 2012 test preparations from the most recent up to date Testking checks 70-410 check motor. Your dreams should come correct by start the 70-410 vce for Installing and Configuring Windows Server 2012 test via Testking Microsoft research instructions only. You wont able to stand out your abilities inside the initial endeavor of 70-410 check if you use a some other walkway as compared to Microsoft. Microsoft Microsoft 70-410 pdf file will provide you with brilliance therefore making you sufficient confident in your whole lifestyle.
2021 Jul mcsa 70-410:
Q131. - (Topic 1)
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012 R2.
The domain contains a user named User1 and a global security group named Group1.
User1 logs on to a client computer named Computer1.
You need to disable the computer account of Computer1.
Which cmdlet should you run?
A. Add-AdPrincipalGroupMember.hip
B. Install-AddsDomainController
C. Install WindowsFeature
D. Install AddsDomain
E. Roname-AdObject
F. Set-AdAccountControl
G. Set-AdGroup
H. Set-User
Answer: F
Explanation:
Set-ADAccountControl Enabled Specifies if an account is enabled. An enabled account requires a password. This parameter sets the Enabled property for an account object. This parameter also sets the ADS_UF_ACCOUNTDISABLE flag of the Active Directory User Account Control (UAC) attribute. Possible values for this parameter include: $false or 0 $true or 1 The following example shows how to set this parameter to enable the account. -Enabled $true
Q132. HOTSPOT - (Topic 3)
You have a DNS server named Server1. Server1 runs Windows Server 2012 R2. The network ID is 10.1.1.0/24. An administrator creates several reverse lookup zones. You need to identify which reverse lookup zone is configured correctly. Which zone should you identify? To answer, select the appropriate zone in the answer area.
Answer:
Q133. - (Topic 2)
Your network contains an Active Directory domain named contoso.com.
The password policy for the domain is set to require a minimum password length of 10 characters.
A user named User1 and a user named User2 work for the sales department.
User1 is forced to create a domain password that has a minimum of 12 characters. User2 is forced to create a domain password that has a minimum of eight characters.
You need to identify what forces the two users to have different password lengths.
Which tool should you use?
A. Credential Manager
B. Security Configuration Wizard (SCW)
C. Group Policy Management
D. Active Directory Administrative Center
Answer: D
Explanation:
In Windows Server 2008, you can use fine-grained password policies to specify multiple password policies and apply different password restrictions and account lockout policies to different sets of users within a single domain. For example, to increase the security of privileged accounts, you can apply stricter settings to the privileged accounts and then apply less strict settings to the accounts of other users. Or in some cases, you may want to apply a special password policy for accounts whose passwords are synchronized with other data sources.
This is found in the Active Directory Administrative Center. You can use Active Directory Administrative Center to perform the following Active Directory administrative tasks: Create new user accounts or manage existing user accounts Create new groups or manage existing groups Create new computer accounts or manage existing computer accounts Create new organizational units (OUs) and containers or manage existing OUs Connect to one or several domains or domain controllers in the same instance of Active Directory Administrative Center, and view or manage the directory information for those domains or domain controllers Filter Active Directory data by using query-building search
: http://technet.microsoft.com/en-us/library/cc770842(v=ws.10).aspx
Q134. DRAG DROP - (Topic 1)
You have a server named Server1 that runs Windows Server 2012 R2.
You need to create a new volume on Server1.
The new volume must have the following configurations: Be stored on a new virtual hard disk Be assigned the drive letter G Have the NTFS file system In which order should you run the Diskpart commands?
To answer, move all the Diskpart commands from the list of commands to the answer area and arrange them in the correct order.
Answer:
Q135. - (Topic 3)
A company has a forest with 4 sites. Subnets are as follows:
MainOffice 172.16.1.0 Subnet: 255.255.255.0 Gateway 172.16.1.254 Site1 192.168.12.0 Subnet: 255.255.255.0 Site 2 192.168.13.0 Subnet: 255.255.255.0 Site 3 192.168.14.0 Subnet: 255.255.255.0 Site 4 192.168.15.0 Subnet: 255.255.255.0
You add a new server to the MainOffice and it needs to be able to communicate to all sites.
Which route command would you run?
A. route add -p 192.168.8.0 netmask 255.255.252.0 172.16.1.254
B. route add -p 192.168.0.0 netmask 255.255.248.0 172.16.1.254
C. route add -p 192.168.12.0 netmask 255.255.252.0 172.16.1.254
D. route add -p 192.168.12.0 netmask 255.255.240.0 172.16.1.254
Answer: C
Update microsoft windows server 2012 certification:
Q136. - (Topic 2)
Your company has a main office and four branch offices. The main office contains a server named Server1 that runs Windows Server 2012 R2.
The IP configuration of each office is configured as shown in the following table.
You need to add a single static route on Server1 to ensure that Server1 can communicate with the hosts on all of the subnets.
Which command should you run?
A. route.exe add -p 10.10.0.0 mask 255.255.252.0 10.10.0.1
B. route.exe add -p 172.16.16.0 mask 255.255.252.0 10.10.0.1
C. route.exe add -p 10.10.0.0 mask 255.255.252.0 172.16.0.0
D. route.exe add -p 172.16.18.0 mask 255.255.252.0 10.10.0.1
Answer: B
Explanation:
These parameters will allow communication with all the hosts.
References:
Exam Ref: 70-410: Installing and Configuring Windows Server 2012 R2, Chapter4:
Deploying and configuring core network services, Objective 4.1: Configure IPv4 and IPv6
addressing, p.192, 196
Q137. DRAG DROP - (Topic 3)
Your company has a main office that contains 225 client computers. The client computers are located on a subnet that uses the network ID of 10.10.1.0/24.
The company plans to open two branch offices. The offices will be configured as shown in the following table.
You need to select a network prefix for each office to ensure that there are enough IPv4 addresses for each client computer.
The solution must minimize the number of unused IP addresses.
Which network prefixes should you select?
To answer, drag the appropriate network prefix to the correct branch office in the answer area.
Answer:
Q138. - (Topic 2)
Your network contains an Active Directory domain named contoso.com. The network contains 500 client computers that run Windows 8. All of the client computers connect to the Internet by using a web proxy.
You deploy a server named Server1 that runs Windows Server 2012 R2. Server1 has the DNS Server server role installed.
You configure all of the client computers to use Server1 as their primary DNS server.
You need to prevent Server1 from attempting to resolve Internet host names for the client computers.
What should you do on Server1?
A. Create a primary zone named “root”.
B. Create a primary zone named "GlobalNames".
C. Create a forwarder that points to 169.254.0.1.
D. Create a primary zone named “.”.
Answer: A
Q139. - (Topic 3)
You have a file server named Server1 that runs Windows Server 2012 R2. Server1 has following hardware configurations:
-16GB of RAM
-A single quad-core CPU
-Three network teams that have two network adapters each
You add additional CPUs and RAM to Server 1.
You repurpose Server1 as a virtualization host. You install the Hyper-V server role on Server1. You need to create four external virtual switches in Hyper-V. Which cmdlet should you run first?
A. Set-NetAdapter.
B. Add-Net1.bfoTeamNic
C. Add-VMNetworkAdapter
D. Remove-NetLbfoTeam
Answer: D
Q140. HOTSPOT - (Topic 3)
Your network contains an Active Directory domain named contoso.com. All client
computers run Windows 8.
An administrator creates an application control policy and links the policy to an
organizational unit (OU) named OU1. The application control policy contains several deny
rules. The deny rules apply to the Everyone group.
You need to prevent users from running the denied application.
What should you configure?
To answer, select the appropriate object in the answer area.
Answer: