70-410 Exam
Beginners Guide: transcender 70-410
Cause all that matters here is passing the Microsoft 70-410 exam. Cause all that you need is a high score of 70-410 Installing and Configuring Windows Server 2012 exam. The only one thing you need to do is downloading Exambible 70-410 exam study guides now. We will not let you down with our money-back guarantee.
2021 Sep windows server 2012 study guide:
Q241. DRAG DROP - (Topic 1)
Your network contains three servers. The servers are configured as shown in the following tablE.
Your company plans to standardize all of the servers on Windows Server 2012 R2.
You need to recommend an upgrade path for each server.
The solution must meet the following requirements: . Upgrade the existing operating system whenever possible. . Minimize hardware purchases. Which upgrade path should you recommend for each server?
To answer, drag the appropriate upgrade path to each server in the answer area. Each upgrade path may be used once, more than once, or not at all.
Answer:
Q242. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
On Server1, an administrator creates a virtual machine named VM1.
A user named User1 is the member of the local Administrators group on Server1.
User1 attempts to modify the settings of VM1 as shown in the following exhibit. (Click the
Exhibit button.)
You need to ensure that User1 can modify the settings of VM1 by running the Set-Vm cmdlet.
What should you instruct User1 to do?
A. Import the Hyper-V module.
B. Install the Integration Services on VM1.
C. Run Windows PowerShell with elevated privileges.
D. Modify the membership of the local Hyper-V Administrators group.
Answer: C
Explanation:
You can only use the PowerShell snap-in to modify the VM settings with the vm cmdlets
when you are an Administrator.
Thus best practices dictate that User1 run the PowerShell with elevated privileges.
Reference: http://technet.microsoft.com/en-us/library/jj713439.aspx
Q243. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed. You have been instructed to make sure that a server, named ENSUREPASS-SR07, is configured to be managed remotely from ENSUREPASS-SR01 using Server Manager.
Which of the following is not a valid option to take? (Choose all that apply.)
A. You could access the server manager on ENSUREPASS-SR07.
B. You could access the server manager on ENSUREPASS-SR13.
C. You could run the %windir%\system32\Configure-SMRemoting.exe from an elevated command prompt on ENSUREPASS-SR13.
D. You could run the Configure-SMRemoting.exe – enable cmdlet on ENSUREPASS-SR07.
Answer: B,C
Q244. - (Topic 2)
You have a server named Server1 that runs Windows Server 2012 R2. You add a 4-TB disk named Disk 5 to Server1.
You need to ensure that you can create a 3-TB volume on Disk 5.
What should you do?
A. Create a storage pool.
B. Convert the disk to a dynamic disk
C. Create a VHD, and then attach the VHD.
D. Convert the disk to a GPT disk.
Answer: D
Explanation:
MBR max is 2TB, the disk must be GPT For any hard drive over 2TB, we need to use GPT partition. If you have a disk larger than 2TB size, the rest of the disk space will not be used unless you convert it to GPT. An existing MBR partition can’t be converted to GPT unless it is completely empty; you must either delete everything and convert or create the partition as GPT. It is not possible to boot to a GPT partition, impossible to convert MBR to GPT without data loss.
Q245. HOTSPOT - (Topic 3)
You have a Hyper-V host named HYPERV1. HYPERV1 hosts a virtual machine named
DC1.
You need to prevent the clock on DC1 from synchronizing from the clock on HYPERV1.
What should you configure? To answer, select the appropriate object in the answer area.
Answer:
Most recent installing and configuring windows server 2012 book:
Q246. - (Topic 1)
Your company has a main office and two branch offices. The offices connect to each other by using a WAN link.
In the main office, you have a server named Server1 that runs Windows Server 2012 R2.
Server1 is configured to use an IPv4 address only.
You need to assign an IPv6 address to Server1. The IP address must be private and routable.
Which IPv6 address should you assign to Server1?
A. fe80:ab32:145c::32cc:401b
B. ff00:3fff:65df:145c:dca8::82a4
C. 2001:ab32:145c::32cc:401b
D. fd00:ab32:14:ad88:ac:58:abc2:4
Answer: D
Explanation:
Unique local addresses are IPv6 addresses that are private to an organization in the same way that private addresses–such as 10.x.x.x, 192.168.x.x, or 172.16.0.0 172.31.255.255–can be used on an IPv4 network. Unique local addresses, therefore, are not routable on the IPv6 Internet in the same way that an address like 10.20.100.55 is not routable on the IPv4 Internet. A unique local address is always structured as follows: The first 8 bits are always 11111101 in binary format. This means that a unique local address always begins with FD and has a prefix identifier of FD00::/8.
Q247. - (Topic 3)
You perform a Server Core Installation of Windows Server 2012 R2 on a server named Server1.
You need to add a graphical user interface (GUI) to Server1.
Which tool should you use?
A. the dism.exe command
B. the Add-WindowsFeature cmdlet
C. the imagex.exe command
D. the setup.exe command
E. the ocsetup.exe command
F. the Add-WindowsPackage cmdlet
G. the Install-Module cmdlet
H. the Install-RoleService cmdlet
Answer: A,B
Explanation:
Add-WindowsFeature -The Add-WindowsFeature cmdlet allows you to install specified roles, role services, and features on a computer that is running Windows Server 2008 R2. Install-WindowsFeature -Installs one or more Windows Server roles, role services, or features on either the local or a specified remote server that is running Windows Server 2012 R2. This cmdlet is equivalent to and replaces Add-WindowsFeature, the cmdlet that was used to install roles, role services, and features in Windows Server 2008 R2. dism /online /get-features PS C:\> Install-WindowsFeature -Name Web-Server – IncludeAllSubFeature -ComputerName Server1 –WhatIf
Q248. DRAG DROP - (Topic 3)
You have a Hyper-V host named Server1. Server1 hosts a virtual machine named VM1. You view the properties of VM1 as shown in the following exhibit. (Click the Exhibit button.)
You need to configure bandwidth management for VM1.
Which three actions should you perform in sequence? (To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.)
Answer:
Q249. - (Topic 2)
You have a server named Server1 that runs Windows Server 2012 R2.
You need to enable access-based enumeration for a file share on Server1.
Which tool should you use?
A. File Server Resource Manager (FSRM)
B. Share and Storage Management
C. Server Manager
D. File Explorer
Answer: C
Explanation:
Access-based enumeration displays only the files and folders that a user has permissions to access. It is a feature that was previously available as a downloadable package for the Windows Server. 2003 operating system (it was also included in Windows Server 2003 Service Pack 1). Access-based enumeration is now included in the Windows Server 2008 operating system, and you can enable it by using Share and Storage Management.
Q250. - (Topic 1)
You have a server named Server1. Server1 runs Windows Server 2012 R2.
Server1 has a thin provisioned disk named Disk1.
You need to expand Disk1.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. From File and Storage Services, extend Disk1.
B. From File and Storage Services, add a physical disk to the storage pool.
C. From Disk Management, extend the volume.
D. From Disk Management, delete the volume, create a new volume, and then format the volume.
E. From File and Storage Services, detach Disk1.
Answer: A,B
Explanation:
Step 1 (B): if required add physical disk capacity.
Step 2 (A): Dynamically extend the virtual disk (not volume).
The File and Storage Services role and the Storage Services role service are installed by
default, but without any additional role services. This basic functionality enables you to use
Server Manager or Windows PowerShell to manage the storage functionality of your
servers.
Windows Server 2012 Storage Space subsystem now virtualizes storage by abstracting
multiple physical disks into a logical construct with specified capacity.
The process is to group selected physical disks into a container, the so-called storage pool,
such that the total capacity collectively presented by those associated physical disks can
appear and become manageable as a single and seemingly continuous space.
Subsequently storage administrator creates a virtual disk based on a storage pool,
configure a storage layout which is essentially a RAID level, and expose the storage of the
virtual disk as a drive letter or a mapped folder in Windows Explorer.
The system administrator uses File and Storage Services in Server Manager or the Disk
Management tool tore scan the disk, bring the disk online, and extend the disk size.