70-410 Exam
Where to find mcsa 70 410 pdf
We provide real 70 410 exam questions exam questions and answers braindumps in two formats. Download PDF & Practice Tests. Pass Microsoft 70 410 installing and configuring windows server 2012 r2 Exam quickly & easily. The examcollection 70 410 PDF type is available for reading and printing. You can print more and practice many times. With the help of our Microsoft vce 70 410 dumps pdf and vce product and material, you can easily pass the 70 410 vce exam.
P.S. Real 70-410 class are available on Google Drive, GET MORE: https://drive.google.com/open?id=1kvP726ODa9zZg32kCD3kLoR5Zt7aQQnX
New Microsoft 70-410 Exam Dumps Collection (Question 4 - Question 13)
Q4. You work as a senior administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed.
You are running a training exercise for junior administrators. You are currently discussing connection security rules.
Which of the following is TRUE with regards to connection security rules? (Choose all that apply.)
A. Connection security rules allows for traffic to be secured via IPsec.
B. Connection security rules do not allow the traffic through the firewall.
C. Connection security rules are applied to programs or services.
D. Connection security rules are applied between two computers.
Answer: A,B,D
Explanation:
Connection security involves the authentication of two computers before they begin communications and the securing of information sent between two computers. Windows Firewall with Advanced Security uses Internet Protocol security (IPsec) to achieve connection security by using key exchange, authentication, data integrity, and, optionally, data encryption.
How firewall rules and connection security rules are related
Firewall rules allow traffic through the firewall, but do not secure that traffic. To secure traffic with IPsec, you can create Computer Connection Security rules. However, the creation of a connection security rule does not allow the traffic through the firewall. You must create a firewall rule to do this, if the traffic is not allowed by the default behavior of the firewall. Connection security rules are not applied to programs or services; they are applied between the computers that make up the two endpoints.
Q5. Your network contains one Active Directory domain named contoso.com. The domain contains 10 domain controllers and a read-only domain controller (RODC) named RODC01.
You plan to deploy a child domain for contoso.com in Microsoft Azure.
To the Azure subscription, you add several virtual machines that have a Server Core installation of Windows Server 2012 R2.
You need to create the new domain on one of the virtual machines. Which tool should you use?
A. the ntdsutil command
B. the Set-ADDomain cmdlet
C. the Install-ADDSDomain cmdlet
D. the dsadd command
E. the dsamain command
F. the dsmgmt command
G. the net user command
H. the Set-ADForest cmdlet
Answer: C
Explanation:
The Install-ADDSDomain cmdlet installs a new Active Directory domain configuration. Reference: Install-ADDSDomain
https://technet.microsoft.com/en-us/library/hh974722(v=wps.630).aspx
Q6. Which of the following are the two built-in user accounts created automatically on a computer running Windows Server 2012 R2?
A. Network
B. Interactive
C. Administrator
D. Guest
Answer: C,D
Explanation:
:A. Incorrect: There is no Network account in Windows Server 2012 R2.
:B. Incorrect: There is no Interactive account in Windows Server 2012 R2.
:C. Correct: By default, the two built-in user accounts created on a computer running Windows Server 2012 are the Administrator account and the Guest account.
:D. Correct: By default, the two built-in user accounts created on a computer running Windows Server 2012 are the Administrator account and the Guest account.
Q7. Your network contains one Active Directory forest named contoso.com. The forest contains a single domain. All domain controllers run Windows Server 2012 R2.
You need to modify the membership of a group named Group1 to include two users named User1 and User2.
What command should you run? To answer, select the appropriate options in the answer area.
Select three.
A. Use command Add-GroupMember
B. Use command Add-ADGroupMember
C. As first parameter use Group1
D. As first parameter use User1, User2
E. As first parameter use {User1, User2}
F. As second parameter use Group1
G. As second parameter use User1, User2
H. As second parameter use {User1, User2}
Answer: B,C,G
Explanation:
Correct answer is: Add-ADGroupMember Group1 User1, User2
Add-ADGroupMember adds one or more members to an Active Directory group. Example: Command Prompt: C:PS>Add-ADGroupMember SvcAccPSOGroup SQL01,
SQL02
Adds the user accounts with SamAccountNames SQL01, SQL02 to the group
SvcAccPSOGroup.
Reference: Add-ADGroupMember https://technet.microsoft.com/en-us/library/ee617210.aspx
Q8. A companyu2021s server virtualization team needs to provision a series of Hyper-V workloads to use existing network storage arrays. The team has chosen to use Fibre Channel ports within the guest operating systems.
Which of the following Windows Server versions can be used as guest operating systems when using Hyper-V Fibre Channel ports?
A. 2003 R2
B. 2008
C. 2003
D. 2012
Answer: B,D
Explanation:
Windows Server 2008, 2008 R2, and 2012 R2 can be guest operating systems when using Hyper-V Fibre Channel host bus adaptors (HBAs). Updated HBA drivers are needed along with NPIV-enabled (N_Port ID Virtualization) SANs.
Quick Tip: Virtual Fibre Channel logical units cannot be used as boot media.
Q9. You run a Windows Server 2012 R2, what is the PowerShell command to set preferred dns server. Note: Other config such as ip address should not be changed.
A. Register-DnsClient
B. Set-DnsClient
C. Set-DnsPreferredClientServerAddress
D. Set-DnsClientServerAddress
Answer: D
Q10. You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed.
Contoso.com has a server, named ENSUREPASS-SR13, which is configured as the primary DNS server in the Contoso.com domain. Contoso.com has another server, named ENSUREPASS-SR14, which makes use of ENSUREPASSSR13 for DNS queries.
You want to make sure that running nslookup.exe from ENSUREPASS-SR14 produces a result that shows the proper name of the default server.
Which of the following actions should you take?
A. You should consider creating a reverse lookup zone on ENSUREPASS-SR14.
B. You should consider creating a forward lookup zone on ENSUREPASS-SR14.
C. You should consider creating a reverse lookup zone on ENSUREPASS-SR13.
D. You should consider creating a forward lookup zone on ENSUREPASS-SR13.
Answer: C
Explanation:
When you start Nslookup from a command line, the following error message may be displayed: DNS request timed out
timeout was x seconds
Canu2021t find server name for address xxx.xxx.xxx.xxx: Timed out Default servers are not available
Default Server: UnKnown Address: xxx.xxx.xxx.xxx
where xxx.xxx.xxx.xxx is the Internet Protocol (IP) address of the host on which you are attempting to start
Nslookup.
CAUSE When Nslookup starts, it attempts to resolve the IP address of its hostu2021s DNS server to its fully qualified domain name (FQDN). If the DNS server does not respond or if the DNS serveru2021s reverse lookup zones do not contain a PTR record for the DNS serveru2021s IP address, the error message is displayed.
Q11. Your network contains a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2.
You take a snapshot of VM1, and then you install an application on VM1. You verify that the application runs properly.
You need to ensure that the current state of VM1 is contained in a single virtual hard disk file. The solution must minimize the amount of downtime on VM1.
What should you do?
A. From Hyper-V Manager, delete the snapshot.
B. From a command prompt, run dism.exe and specify the /commit-image parameter.
C. From a command prompt, run dism.exe and specify the /delete-image parameter.
D. From Hyper-V Manager, inspect the virtual hard disk.
Answer: A
Explanation:
Virtual machine snapshots are file-based snapshots of the state, disk data, and configuration of a virtualmachine at a specific point in time. You can take multiple snapshots of a virtual machine, even while it is running. You can then revert the virtual machine to any of the previous states by App1ying a snapshot to the virtualmachine. Taking a snapshot of a VM is to in essence freeze the current state and make it a parent disk based on currentstate, and at the same time create a child disk to capture all subsequent changes. u2013 See more at:
Snapshots require adequate storage space. Snapshots are stored as .avhd files in the same location at thevirtual hard disk. Taking multiple snapshots can quickly consume a
large amount of storage space.
When you use Hyper-V Manager to delete a snapshot, the snapshot is removed from the snapshot treebut the .avhd file is not deleted until you turn off the virtual machine.
Q12. Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 has the Group Policy Management feature installed. Server2 has the Print and Document Services server role installed.
On Server2, you open Print Management and you deploy a printer named Printer1 by using a Group Policy object (GPO) named GPO1.
When you open GPO1 on Server1, you discover that the Deployed Printers node does not appear.
You need to view the Deployed Printers node in GPO1. What should you do?
A. On Server1, install the Group Policy Management feature.
B. On Server1, add and share a printer.
C. On Server2, restart the Print Spooler service.
D. On a domain controller, add a Group Policy template to GPO1.
Answer: B
Explanation:
We need to share at least one printer.
Q13. You have an offline image of a server that runs Windows Server 2012 R2. You need to enable Remote Desktop Services (RDS) on the server.
What should you use?
A. the sc.exe command with the config parameter
B. the Add-RDServerSessionHost cmdlet
C. the configure-smremoting.exe command with the u2013Enable parameter
D. the Install-WindowsFeature cmdlet
Answer: C
Explanation:
Enable the Remote-Desktop-Services feature in the offline image by executing the command Dism /Enable-Feature /FeatureName:Remote-Desktop-Services. Remote management can be also be configured using the PowerShell command Configure- SMRemoting.exe -Enable or the u2013Disable switch if choosing to disable the service.
Reference: Installing and Configuring Windows Server 2012 R2
http://www.pearsonitcertification.com/articles/article.aspx?p=2248808&seqNum=2
100% Latest Microsoft 70-410 Questions & Answers shared by Dumpscollection, Get HERE: http://www.dumpscollection.net/dumps/70-410/ (New 496 Q&As)