70-410 Exam
A Complete Guide to 70 410 dumps
Master the 70 410 study guide pdf Installing and Configuring Windows Server 2012 content and be ready for exam day success quickly with this Ucertify mcsa 70 410 exam answers. We guarantee it!We make it a reality and give you real mcsa 70 410 questions in our Microsoft 70 410 installing and configuring windows server 2012 braindumps.Latest 100% VALID Microsoft examcollection 70 410 Exam Questions Dumps at below page. You can use our Microsoft 70 410 installing and configuring windows server 2012 pdf braindumps and pass your exam.
Q271. - (Topic 3)
Your network contains an Active Directory domain named adatum.com. The domain contains the servers shown in the following table.
You need to ensure that you can use Server Manager on DC1 to manage DC2.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Install Microsoft .NET Framework 4 on DC2.
B. Install Remote Server Administration Tools on DC1.
C. Install Remote Server Administration Tools on DC2.
D. Install Windows Management Framework 3.0 on DC2.
Answer: A,D
Explanation:
Windows Management Framework 3.0. To use this release of Server Manager to access and manage remote servers that are running Windows Server 2008 or Windows Server 2008 R2, you must first install .NET Framework 4.0, and then install Windows Management Framework 3.0 on those servers. Note: In Windows Server 2012 R2, you can use Server Manager to perform management tasks on remote servers. Remote management is enabled by default on servers that are running Windows Server 2012 R2. To manage a server remotely by using Server Manager, you add the server to the Server Manager server pool. You can use Server Manager to manage remote servers that are running Windows Server 2008 and Windows Server 2008 R2, but the following updates are required to fully manage these older operating systems (see above).
Reference: Configure Remote Management in Server Manager.
Q272. HOTSPOT - (Topic 1)
Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2.
You need to add a user named User1 to a group named ServerAdmins.
What command should you run? To answer, select the appropriate options in the answer area.
Answer:
Q273. - (Topic 2)
You have a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed.
The disks on Server1 are configured as shown in the exhibit. (Click the Exhibit button.)
You create a virtual machine on Server1.
You need to ensure that you can configure a pass-through disk for the virtual machine.
What should you do?
A. Convert Disk 1 to a GPT disk.
B. Delete partition E.
C. Convert Disk 1 to a dynamic disk.
D. Take Disk 1 offline.
Answer: D
Explanation:
References: Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Objective 3.2: Create and Configure virtual machine storage, Chapter 3: p. 159 Exam Ref 70-410: Installing and Configuring Server 2012: Objective 1.3: Installing and Configuring servers, Chapter 1: p. 42-43 http://blogs.technet.com/b/askcore/archive/2008/10/24/configuring-pass-through-disks-in-hyper-v.aspx
Q274. - (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain
contains three servers named Server1, Server2, and Server3.
You create a server group named ServerGroup1.
You discover the error message shown in the following exhibit. (Click the Exhibit button.)
You need to ensure that Server2 can be managed remotely by using Server Manager. What should you do?
A. On DC1, run the Enable-PSSessionConfiguration cmdlet.
B. On Server2, run the Add-Computer cmdlet.
C. On Server2 modify the membership of the Remote Management Users group.
D. From Active Directory Users and Computers, add a computer account named Server2, and then restart Server2.
Answer: C
Explanation:
This is a security issue. To be able to access Server2 remotely through Server Manager
the user need to be a member of the Remote Management Users group.
Note:
* Name: BUILTIN\Remote Management Users Description: A Builtin Local group. Members of this group can access WMI resources over management protocols (such as WS-Management via the Windows Remote Management service). This applies only to WMI namespaces that grant access to the user.
* Enable-ServerManagerStandardUserRemoting Provides one or more standard, non-Administrator users access to event, service, performance counter, and role and feature inventory data for a server that you are managing by using Server Manager. Syntax: Parameter Set: Default Enable-ServerManagerStandardUserRemoting [-User] <String[]> [-Force] [-Confirm] [-WhatIf] [ <CommonParameters>] Detailed Description Provides one or more standard, non-Administrator users access to event, service, performance counter, and role and feature inventory data for a server that you are managing, either locally or remotely, by using Server Manager. The cmdlet must be run locally on the server that you are managing by using Server Manager. The cmdlet works by performing the following actions: Adds access rights for specified standard users to the root\cimv2 namespace on the local server (for access to role and feature inventory information). Adds specified standard users to required user groups (Remote Management Users, Event Log Readers, and Performance Log Readers) that allow remote access to event and performance counter logs on the managed server. Changes access rights in the Service Control Manager to allow specified standard users remote access to the status of services on the managed server. Incorrect: Not A: the Enable-PSSessionConfiguration.This is an advanced cmdlet that is designed to be used by system administrators to manage customized session configurations for their
users.
Reference: Enable-ServerManagerStandardUserRemoting
Q275. HOTSPOT - (Topic 3)
You have a Group Policy object (GPO) named Server Audit Policy. The settings of the GPO are shown in the Settings exhibit. (Click the Exhibit button.)
The scope of the GPO is shown in the Scope exhibit. (Click the Exhibit button.)
The domain contains a group named Group1. The membership of Group1 is shown in the Group1 exhibit. (Click the Exhibit button.)
Select Yes if the statement can be shown to be true based on the available information; otherwise select No. Each correct selection is worth one point.
Answer:
Q276. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. All servers run either Windows Server 2008 R2 or Windows Serve 2012 R2. All client computers run either Windows 7 or Windows 8. The domain contains a member server named Server1 that runs Windows Server 2012 R2. Server1 has the File and Storage Services server role installed. On Server1, you create a share named Share1.
You need to ensure that users can use Previous Versions to restore the files in Share1.
What should you configure on Server1?
A. The Shadow Copies settings
B. A Windows Server Backup schedule
C. A data recovery agent
D. The Recycle Bin properties
Answer: A
Explanation:
A. Enable and schedule shadow copies for Share1
B. The backup doesn’t give users access until files are restored
D. No settings for file version
Q277. HOTSPOT - (Topic 2)
You have two servers that run Windows Server 2012 R2. The servers are configured as shown in the following table.
You need to ensure that Server2 can be managed by using Server Manager from Server1.
In the table below, identify which actions must be performed on Server1 and Server2.Make only one selection in each row. Each correct selection is worth one point.
Answer:
Q278. - (Topic 1)
Your network contains an Active Directory domain named contoso.com. All client computer accounts are in an organizational unit (OU) named AllComputers. Client computers run either Windows 7 or Windows 8.
You create a Group Policy object (GPO) named GP1.
You link GP1 to the AllComputers OU.
You need to ensure that GP1 applies only to computers that have more than 8 GB of
memory.
What should you configure?
A. The Security settings of GP1
B. The Block Inheritance option for AllComputers
C. The Security settings of AllComputers
D. The WMI filter for GP1
Answer: D
Explanation:
Windows Management Instrumentation (WMI) filters allow you to dynamically determine the scope of Group Policy objects (GPOs) based on attributes of the target computer. When a GPO that is linked to a WMI filter is applied on the target computer, the filter is evaluated on the target computer. If the WMI filter evaluates to false, the GPO is not applied (except if the client computer is running Windows Server, in which case the filter is ignored and the GPO is always applied). If the WMI filter evaluates to true, the GPO is applied. WMI filters, like GPOs, are stored on a per-domain basis. A WMI filter and the GPO it is linked to must be in the same domain.
References: Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 10: Implementing Group Policy, p.470, 482 http://technet.microsoft.com/en-us/library/jj134176 WMI filtering using GPMC
Q279. - (Topic 3)
You have a server named Server1 that runs Windows Server 2012 R2.
You plan to enable Hyper-V Network Virtualization on Server1.
You need to install the Windows Network Visualization Filter Driver on Server1.
Which Windows PowerShell cmdlet should you run?
A. Set-NetVirtualizationGlobal
B. Enable-NetAdapterBinding
C. Add - WindowsFeature
D. Set-NetAdapterVmq
Answer: B
Explanation:
Hyper-V Network Virtrtualization runs multiple virtual networks on a physical network. And each virtual network operates as if it is running as a physical network. The Set-NetAdaptercmdlet sets the basic properties of a network adapter such as virtual LAN (VLAN) identifier (ID) and MAC address. Thus if you add the binding parameter to the command then you will be able to install the Windows Network Virtualization Filter Driver. Step one: Enable Windows Network Virtualization (WNV). This is a binding that is applied to the NIC that you External Virtual Switch is bound to. This can be a physical NIC, it can be an LBFO NIC team. Either way, it is the network adapter that your External Virtual Switch uses to exit the server. This also means that if you have multiple virtual networks or multiple interfaces that you can pick and choose and it is not some global setting. If you have one External Virtual Switch this is fairly easy: $vSwitch = Get-VMSwitch -SwitchType External # Check if Network Virtualization is bound # This could be done by checking for the binding and seeing if it is enabled ForEach-Object -InputObject $vSwitch { if ((Get-NetAdapterBinding -ComponentID "ms_netwnv" -InterfaceDescription $_.NetAdapterInterfaceDescription).Enabled -eq $false){ # Lets enable it Enable-NetAdapterBinding -InterfaceDescription $_.NetAdapterInterfaceDescription -ComponentID "ms_netwnv"}}