70-410 Exam
mcp 70 410? Tips for success
It is impossible to pass Microsoft 70 410 pdf exam without any help in the short term. Come to Examcollection soon and find the most advanced, correct and guaranteed Microsoft vce 70 410 practice questions. You will get a surprising result by our Up to the minute Installing and Configuring Windows Server 2012 practice guides.
Q21. - (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains an organizational unit (OU) named OU1.
You need to ensure that when new client computers join the domain, their computer accounts are created in OU1 by default.
What should you do?
A. From Windows PowerShell, run the Move-ADObjectcmdlet.
B. From a command prompt, run the redircmp.exe command.
C. From ADSI Edit, configure the properties of the OU1 object.
D. From Ldp, configure the properties of the Computers container.
Answer: B
Explanation:
Redirects the default container for newly created computers to a specified, target organizational unit (OU) so that newly created computer objects are created in the specific target OU instead of in CN=Computers. The CN=Computers container is a computer-protected object. For backward compatibility reasons, you cannot (and must not) remove it.
: http://technet.microsoft.com/en-us/library/cc770619.aspx
Q22. - (Topic 3)
You have a server named Server1 that runs Windows Server 2012 R2. You promote Server1 to domain controller. You need to view the service location (SVR) records that Server1 registers on DNS. What should you do on Server1?
A. Open the Srv.sys file
B. Open the Netlogon.dns file
C. Run ipconfig/displaydns
D. Run Get-DnsServerDiagnostics
Answer: B
Q23. - (Topic 3)
Your network contains two Hyper-V hosts named Host1 and Host2. Host1 contains a virtual machine named VM1. Host2 contains a virtual machine named VM2. VM1 and VM2 run Windows Server 2012 R2.
You install the Network Load Balancing feature on VM1 and VM2.
You need to ensure that the virtual machines are configured to support Network Load Balancing (NLB).
Which virtual machine settings should you configure on VM1 and VM2?
A. DHCP guard
B. MAC address
C. Router guard
D. Port mirroring
Answer: B
Explanation:
When MAC addresses are not assigned to virtual machines, it could cause network problems.
References: Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 7: Hyper-V virtualization, Lesson 1: Deploying and configuring Hyper-V hosts, p. 313-319 http://blogs.msdn.com/b/clustering/archive/2010/07/01/10033544.aspx
Q24. - (Topic 3)
Your network contains an Active Directory domain named contoso.com.
You discover that when you join client computers to the domain manually, the computer accounts are created in the Computers container.
You need to ensure that new computer accounts are created automatically in an organizational unit (OU) named Corp.
Which tool should you use?
A. net.exe
B. redircmp.exe
C. regedit.exe
D. dsadd.exe
Answer: B
Explanation:
A. Used to stop/start protocols
B. Redirects the default container for newly created computers to a specified, target
organizational unit
C. Modify local registry entries
D. Adds specific types of objects to the directory
Redirects the default container for newly created computers to a specified, target
organizational unit (OU) so that newly created computer objects are created in the specific
target OU instead of in CN=Computers.
You must run the redircmp command from an elevated command prompt.
Redircmp.exe is located in the C:\Windows\System32 folder.
You must be a member of the Domain Admins group or the Enterprise Admins group to
use this tool.
Q25. - (Topic 3)
You have a server named Server1 that has the Print and Document Services server role installed.
You need to provide users with the ability to manage print jobs on Server1 by using a web browser.
What should you do?
A. Start the Printer Extensions and Notifications service and set the service to start automatically.
B. Install the LPD Service role service.
C. Start the Computer Browser service and set the service to start automatically.
D. Install the Internet Printing role service.
Answer: D
Explanation:
References: Internet printing makes it possible for computers running Windows Server 2008 to use printers located anywhere in the world by sending print jobs using Hypertext Transfer Protocol (HTTP). http://technet.microsoft.com/en-us/library/cc731368(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc731857.aspx
Q26. - (Topic 3)
Your network contains an Active Directory domain named contoso.com.
You have a Group Policy object (GPO) named GPO1 that contains several user settings.
GPO1 is linked to an organizational unit (OU) named OU1.
The help desk reports that GPO1 applies to only some of the users in OU1.
You open Group Policy Management as shown in the exhibit. (Click the Exhibit button.)
You need to configure GPO1 to apply to all of the users in OU1.
What should you do?
A. Modify the Security settings of GPO1.
B. Disable Block Inheritance on OU1.
C. Modify the GPO status of GPO1.
D. Enforce GPO1.
Answer: A
Explanation:
Inheritance is blocked, but that would only affect policies applied ABOVE the given OU, not
the one applied directly to it (as is the case with GPO1). Also Enforcing a policy is only going to cause it to be applied even when inheritance is blocked (which, as mentioned, does not make a difference on policies which are directly linked to the OU as a child). That means that there must be something in the security settings (such as a Security Group which does not have the “read” or “Apply group policy” permission) preventing ALL of the users in OU1 from having the policy applied. (GPO status is the status of its replication within the forest, so it is not relevant here.)
Q27. - (Topic 3)
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has five network adapters. Three of the network adapters are connected to a network named LAN1. The two other network adapters are connected to a network named LAN2.
You need to create a network adapter team from the three network adapters connected to LAN1.
Which tool should you use?
A. Routing and Remote Access
B. Network and Sharing Center
C. Server Manager
D. Network Load Balancing Manager
Answer: C
Q28. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com.
Contoso.com has a server, named ENSUREPASS-SR15, which has Windows Server 2012 R2 installed. Contoso.com also has a server, named ENSUREPASS-SR16, which has Windows Server 2008 R2 SP1 installed.
You have been instructed to make sure that ENSUREPASS-SR16 is able to run Windows PowerShell 3.0.
Which of the following actions should you take? (Choose two.)
A. You should consider making sure that ENSUREPASS-SR16 has a full installation of Microsoft .NET Framework 4 installed.
B. You should consider making sure that ENSUREPASS-SR16 has a full installation of Microsoft .NET Framework 2 installed.
C. You should consider making sure that ENSUREPASS-SR16 has WS-Management 3.0 installed.
D. You should consider making sure that ENSUREPASS-SR16 is upgraded to Windows Server 2012 R2.
Answer: A,C
Explanation:
WS-Management 3.0 – Windows Management Framework 3.0 Includes Windows PowerShell 3.0, WMI, WinRM, Management OData IIS Extension, and Server Manager CIM Provider
Windows Management Framework 3.0 requires Microsoft .NET Framework 4.0.
Q29. - (Topic 2)
Your network contains an Active Directory domain named contoso.com.
An administrator provides you with a file that contains the information to create user accounts for 200 temporary employees. The file is shown in the exhibit. (Click the Exhibit button.)
You need to automate the creation of the user accounts. You must achieve this goal by using the minimum amount of administrative effort.
Which tool should you use?
A. Ldifde
B. csvde
C. Dsadd
D. Net user
Answer: B
Explanation:
csvde – Imports and exports data from Active Directory Domain Services (AD DS) using files that store data in the comma-separated value (CSV) format. You can also support batch operations based on the CSV file format standard. Net user – Adds or modifies user accounts, or displays user account information. Ldifde – Creates, modifies, and deletes directory objects. You can also use ldifde to extend the schema, export Active Directory user and group information to other applications or services, and populate Active Directory Domain Services (AD DS) with data from other directory services. Dsadd – Adds specific types of objects to the directory.
csvde.exe is the best option to add multiple users. As you just need to export the excel
spreadsheet as a .csv file and make sure the parameters are correct.
You can use Csvde to import and export Active Directory data that uses the comma-
separated value format.
Use a spreadsheet program such as Microsoft Excel to open this .csv file and view the
header and value information.
References:
Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Chapter 5: Install
and administer Active Directory, Objective 5.2: Create and Manage Active Directory Users
and Computers, p. 269
Q30. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers in the Contoso.com domain, including domain controllers, have Windows Server 2012 R2 installed.
Contoso.com has a domain controller, named ENSUREPASS-DC01.
You have been instructed to make sure that the Group Policy Administrative Templates are available centrally.
Which of the following actions should you take?
A. You should consider copying the policies folder to the PolicyDefinitions folder in the Contoso.com domain’s SYSVOL folder.
B. You should consider copying the PolicyDefinitions folder to the policies folder in the Contoso.com domain’s SYSVOL folder.
C. You should consider copying the PolicyDefinitions folder to the policies folder in the Contoso.com domain’s systemroot folder.
D. You should consider copying the PolicyDefinitions folder to the policies folder in the Contoso.com domain’s logonserver folder.
Answer: B
Explanation:
PolicyDefinitions folder within the SYSVOL folder hierarchy. By placing the ADMX files in this directory, they are replicated to every DC in the domain; by extension, the ADMX-aware Group Policy Management Console in Windows Vista, Windows 7, Windows Server 2008 and R2 can check this folder as an additional source of ADMX files, and will report them accordingly when setting your policies. By default, the folder is not created. Whether you are a single DC or several thousand, I would strongly recommend you create a Central Store and start using it for all your ADMX file storage. It really does work well. The Central Store To take advantage of the benefits of .admx files, you must create a Central Store in the SYSVOL folder on a domain controller. The Central Store is a file location that is checked by the Group Policy tools. The Group Policy tools use any .admx files that are in the Central Store. The files that are in the Central Store are later replicated to all domain controllers in the domain. To create a Central Store for .admx and .adml files, create a folder that is named PolicyDefinitions in the following location: \\FQDN\SYSVOL\FQDN\policies. Note: FQDN is a fully qualified domain name.