70-410 Exam
Advanced Guide: 70 410 pdf
Our pass rate is high to 98.9% and the similarity percentage between our 70 410 exam questions study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Microsoft 70 410 study guide pdf exam in just one try? I am currently studying for the Microsoft 70 410 practice exam exam. Latest Microsoft 70 410 installing and configuring windows server 2012 Test exam practice questions and answers, Try Microsoft 70 410 exam Brain Dumps First.
Q211. - (Topic 3)
You have a server named Server1 that runs Windows Server 2012 R2.
You try to install the Microsoft .NET Framework 3.5 Features feature on Server1, but the
installation fails repeatedly.
You need to ensure that the feature can be installed on Server1.
What should you do?
A. Run the Add-AppxProvisionedPackage cmdlet.
B. Remove the .NET Framework 4.5 Features feature.
C. Connect Server1 to the Internet.
D. Install the Web Server (IIS) server role.
Answer: C
Explanation:
The files needed are no longer available on the local Hard drive. We need to connect the server to the Internet. Important to note that when starting with Windows Server 2012 R2 and Windows 8, the feature files for .NET Framework 3.5 (which includes .NET Framework 2.0 and .NET Framework 3.0) are not available on the local computer by default. The files have been removed. Files for features that have been removed in a Features on Demand configuration, along with feature files for .NET Framework 3.5, are available through Windows Update. By default, if feature files are not available on the destination server that is running Windows Server 2012 R2 R2 Preview or Windows Server 2012 R2, the installation process searches for the missing files by connecting to Windows Update. You can override the default behavior by configuring a Group Policy setting or specifying an alternate source path during installation, whether you are installing by using the Add Roles and Features Wizard GUI or a command line.
References: Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2, Chapter 2: Configure server roles and Features, p. 117 Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 2: Deploying servers, p. 80
Q212. - (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.Server1 contains a virtual machine named VM1 that runs Windows Server 2012 R2.
You need to ensure that a user named User1 can install Windows features on VM1. The solution must minimize the number of permissions assigned to User1.
To which group should you add User1?
A. Hyper-V Administrators on Server1
B. Administrators on VM1
C. Server Operators on Server1
D. Power Users on VM1
Answer: B
Explanation:
The user has to be an administrator on VM1 to be able to install features.
In Windows Server 2012 R2, the Server Manager console and Windows PowerShell-cmdlets for
Server Manager allow installation of roles and features to local or remote servers, or offline
virtual hard disks (VHDs).
You can install multiple roles and features on a single remote server or offline VHD in a
single Add Roles and Features Wizard or Windows PowerShell session. You must be
logged on to a server as an administrator to install or uninstall roles, role services, and
features. If you are logged on to the local computer with an account that does not have
administrator rights on your target server, right-click the target server in the Servers tile,
and then click Manage As to provide an account that has administrator rights. The server
on which you want to mount an offline VHD must be added to Server Manager, and you
must have Administrator rights on that server.
References:
Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 10:
Implementing Group Policy, p.539
Q213. - (Topic 3)
A company’s server deployment team needs to introduce many new Windows Server 2012 R2 domain controllers throughout the network into a single Windows Server 2008 R2 domain. The team has chosen to use Windows PowerShell.
Which Windows PowerShell module includes the command-line options for installing domain controllers?
A. AD DS Administration cmdlets
B. AD DS Deployment cmdlets
C. AD CS Deployment cmdlets
D. AD CS Administration cmdlets
Answer: B
Explanation:
First use the Import-Module ADDSDeployment command in PowerShell–it includes the cmdlets needed to add new domain controllers. Then run Install-ADDSDomainController along with the required arguments. Quick Tip: DCPromo.exe has been deprecated but can still be used along with an answer file, and ADPrep.exe runs automatically when needed (but can be run with elevated rights for more control).
Q214. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named HVServer1. HVServer1 runs Windows Server 2012 and has the Hyper-V server role installed. HVServer1 hosts 10 virtual machines. All of the virtual machines connect to a virtual switch named Switch1. Switch1 is configured as a private network. All of the virtual machines have the DHCP guard and the router guard settings enabled.
You install the DHCP server role on a virtual machine named Server 1. You authorize Server1 as a DHCP server in contoso.com. You create an IP scope.
You discover that the virtual machines connected to Switch1 do not receive IP settings from Server1.
You need to ensure that the virtual machines can use Server1 as a DHCP server.
What should you do?
A. Enable MAC address spoofing on Server1.
B. Disable the DHCP guard on all of the virtual machines that are DHCP clients.
C. Disable the DHCP guard on Server1.
D. Enable single-root I/O virtualization (SR-IOV) on Server1.
Answer: C
Explanation:
Private virtual networks are used where you want to allow communications between virtual machine to virtual machine on the same physical server in a block diagram, a private network is an internal network without a virtual NIC in the parent partition. A private network would commonly be used where you need complete isolation of virtual machines from external and parent partition traffic. DMZ workloads running on a leg of a trihomed firewall, or an isolated test domain are examples where this type of network may be useful.
Q215. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server 2012. You create a group Managed Service Account named gservice1. You need to configure a service named Service1 to run as the gservice1 account. How should you configure Service1?
A. From a command prompt, run sc.exe and specify the config parameter.
B. From Windows PowerShell,run Set-Service and specify the -PassThrough parameter
C. From Windows PowerShell,run Set-Service and specify the -StartupType parameter
D. From Services Console configure the General settings
Answer: A
Q216. - (Topic 3)
You have a server named Server1 that runs a Server Core installation of Windows Server 2012 R2. Server1 is configured to obtain an IPv4 address by using DHCP. You need to configure the IPv4 settings of the network connection on Server1 as follows:
IP address: 10.1.1.1
Subnet mask: 255.255.240.0
Default gateway: 10.1.1.254
What should you run?
A. Set-NetlPInterface
B. netcfg.exe
C. New-NetlPAddress
D. msconfig.exe
Answer: C
Q217. - (Topic 3)
A company’s server virtualization team needs to provision a series of Hyper-V workloads to use existing network storage arrays. The team has chosen to use Fibre Channel ports within the guest operating systems.
Which of the following Windows Server versions can be used as guest operating systems when using Hyper-V Fibre Channel ports?
A. 2003 R2
B. 2008
C. 2003
D. 2012
Answer: B,D
Explanation:
Windows Server 2008, 2008 R2, and 2012 R2 can be guest operating systems when using
Hyper-V Fibre Channel host bus adaptors (HBAs). Updated HBA drivers are needed along
with NPIV-enabled (N_Port ID Virtualization) SANs.
Quick Tip: Virtual Fibre Channel logical units cannot be used as boot media.
Q218. - (Topic 2)
You plan to deploy a file server to a temporary location.
The temporary location experiences intermittent power failures.
The file server will contain a dedicated volume for shared folders.
You need to create a volume for the shared folders. The solution must minimize the
likelihood of file corruption if a power failure occurs.
Which file system should you use?
A. NFS
B. FAT32
C. ReFS
D. NTFS
Answer: C
Explanation:
The ReFS file system allows for resiliency against corruptions with the option to salvage amongst many other key features like Metadata integrity with checksums, Integrity streams with optional user data integrity, and shared storage pools across machines for additional failure tolerance and load balancing, etc.
Q219. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains two domain controllers named DC1 and DC2. You install Windows Server 2012 on a new computer named DC3. You need to manually configure DC3 as a domain controller. Which tool should you use?
A. Server Manager
B. winrm.exe
C. Active Directory Domains and Trusts
D. dcpromo.exe
Answer: A
Q220. - (Topic 1)
Your network contains an Active Directory domain named contoso.com. The DNS zone for contoso.com is Active-Directory integrated.
The domain contains 500 client computers. There are an additional 20 computers in a workgroup.
You discover that every client computer on the network can add its record to the contoso.com zone.
You need to ensure that only the client computers in the Active Directory domain can register records in the contoso.com zone.
What should you do?
A. Sign the contoso.com zone by using DNSSEC.
B. Configure the Dynamic updates settings of the contoso.com zone.
C. Configure the Security settings of the contoso.com zone.
D. Move the contoso.com zone to a domain controller that is configured as a DNS server.
Answer: B